An investigation of the aromaticity of transition metal heterocyclic complexes by conventional criteria and indices of aromaticity

Conventional criteria and indices of aromaticity, including electronic, geometric, energetic and magnetic aspects have been applied to examine the aromaticity of five typical transition metal heterocyclic complexes, i.e. six-membered osmabezene 1 and iridabenzene 2, five-membered cobaltacyclopentadiene 3 and iridacyclopentadiene 4, and four-membered tungstacyclobutadiene 5. The results show that the cyclic, planar, conjugated and Hückel 4n+2 rule’s criteria in the transition-metal-containing heterocycles of the five complexes studied are all met. Five quantitative aromaticity indices, including Bird aromatic index (I_n), homodesmotic reaction aromatic stabilization energy (HASE), absolute hardness (η), diamagnetic susceptibility exaltation (Λ) and NMR chemical shift (δH), qualitatively lead to a consistent and affirmative conclusion that all of them are aromatic. However, they fail to draw a common conclusion for their relative magnitudes of aromaticity, which proves once again the multidimensional character of aromaticity.     

Study of the Complexation Behavior of Calixarene with Transition Metal Cations by UV—vis and Fluorescent Spectra

A new fluorescent compound based on calix[4] arene skeleton was synthesized.Its complexation ability with transition metal ions,such as Fe^3 ,Co^2 ,Ni^2 ,Cu^2 ,Zn^2 and Ag^ ,Was investigated by UV-vis and fluorescent spectra.     

反对数微分简易示波伏安法的研究

在获得微分简易地波伏安图的实验线路中,增加了反对数装置,提出了反对数微分简易示波伏安法。该方法被应用于铝合金中微量铜和分子筛中微量钴的测定,获得了满意结果。     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

硫化镉纳米荧光探针荧光猝灭法测定痕量铜

制备了无机纳米溶胶CdS，研究了纳米粒子的大小和荧光性质，以该纳米粒子为探针，建立了荧光猝灭法测定铜离子的新方法。该方法已成功用于人发样品测定，方法简单，快速，选择性好，灵敏度高，在最佳实验条件下，测定铜离子的线性区间为2．0－24．0μg/L，检出限为0．23μg/L。     

铜催化下格氏试剂与α,ω-二溴代烷的偶合反应

七十年代发展了铜催化下格氏试剂与卤代物、磺酸酯、酰卤的选择性交叉偶合反应,以后对这类反应并未深入研究。我们以几种铜     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

甲烷部分氧化制合成气 Ⅰ．甲烷在过渡金属上的活化

文中用同位素交换（Ｄ_２─ＣＨ_４）反应来测量四种过渡金属负载型催化剂对甲烷的活化能力，并与Ｓｖｅｎｓｓｏｎ等从头算的计算结果作了比较，表明最有效活化甲烷分子的Ｃ─Ｈ键的金属是铑（Ｒｈ）．文中还测定了在甲烷部分氧化制合成气反应中，四个不同催化剂的催化活性与选择性，并与它们对甲烷的活化能力进行对比，可以看出甲烷部分氧化反应中，反应活性高的催化剂有效地活化甲烷，断裂Ｃ─Ｈ键，而且氘代甲烷产物分布以形成ＣＤ_４产物为主要成份．     

呋喃甲醛缩二乙撑三胺希夫碱铜配合物的合成及结构(英)

A novel copper(Ⅱ) complex CuL(NO₃)₂(where L=N,N′-bis(furaldehyde)-diethylenetriamine) was synthesized and characterized by X-ray crystallography analysis. The crystal belongs to monoclinic, space group C2/c with cell parameters a=1.924 0(6) nm, b=0.792 8(3) nm, c=2.504 1(8) nm, β=111.163(5)°, and Z=8. The coordination geometry around Cu(Ⅱ) is a distorted trigonal-bipyramid，and one-dimensional chain is formed through intermolecular hydrogen bonds. CCDC: 255629.     

溴化环氧/Novolacs体系在CEM-3板中的应用

分别以PN、BPFN和BPAN为溴化环氧A80的固化剂,以DMP-30、HMTA和2-MZ为促进剂制备CEM-3覆铜板,研究了这三种线型酚醛树脂作为固化剂对CEM-3覆铜板力学性能、电性能、吸水性和耐热性等的影响.结果表明,以三种线型酚醛树脂为固化剂制备的CEM-3覆铜板的力学性能相近,而吸水性由高至低的顺序为PN＞BPFN＞BPAN,介电性能由高至低的顺序为BPFN≈BPAN＞PN,Tg由高至低的顺序为PN＞BPFN＞BPAN.由BPAN和BPFN为固化剂制备的CEM-3覆铜板经150℃/2h后处理,耐变色性明显优于PN为固化剂制备的CEM-3覆铜板.