一类非线性退化方程混合问题解的渐进性态

本文利用比较原理以及一种特殊变换研究了一类非线性退化方程的混合问题，得到了这类复杂问题解的渐进性质。     

求解非线性规划问题的光滑路径跟踪方法

通过对非线性规划问题的K-T点的光滑路径跟踪方法研究，得出一种针对于既有不等式约束条件又有等式约束条件的优化问题光滑路径跟踪方法，证明了光滑跟踪路径的存在性。     

一种控制掺铒光纤激光器超混沌的方法——非线性延时反馈参数调制法

提出一种非线性延时反馈参数调制法来控制混沌/超混沌，给出了利用这种方法控制处于超混沌状态的双环掺铒光纤激光器的方案.数值模拟表明，只要延时时间和反馈强度合适就可以把双环掺铒光纤激光器从超混沌状态成功地控制到不同的周期状态. 关键词： 掺铒光纤激光器 超混沌 非线性延时反馈参数调制 混沌控制     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

Nonlinear Energy Transfer over the Wave Spectrum in Water Covered by Solid Ice

On the basis of the hydrodynamic equations for nonlinear elastic-gravity waves beneath a solid ice cover and their Hamiltonian representation, a three-wave kinetic equation for the time evolution of the wave spectrum is formulated. The properties of the kernel of the kinetic integral describing the nonlinear interactions between wave triplets are investigated. An algorithm for numerically calculating the kinetic integral is developed. The rate of nonlinear energy transfer over the wave spectrum is estimated quantitatively and its most important characteristics are found.     

Asymptotic Methods Applied to Contact Problems

Asymptotic methods for contact problems are expounded. Some typical integral equations are considered     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

Nonlinear and chaotic oscillations of a constrained cantilevered pipe conveying fluid: A full nonlinear analysis

In this paper, the planar dynamics of a nonlinearly constrained pipe conveying fluid is examined numerically, by considering the full nonlinear equation of motions and a refined trilinear-spring model for the impact constraints—completing the circle of several studies on the subject. The effect of varying system parameters is investigated for the two-degree-of-freedom (N=2) model of the system, followed by less extensive similar investigations forN=3 and 4. Phase portraits, bifurcation diagrams, power spectra and Lyapunov exponents are presented for a selected set of system parameters, showing some rather interesting, and sometimes unexpected, results. The numerical results are compared with experimental ones obtained previously. It is found that in the parameter space that includesN, there exists a subspace wherein excellent qualitative, and reasonably good (N=2) to excellent (N=4) quantitative agreement with experiment. In the latter case, excellent agreement is not only obtained in the threshold flow velocities (u) for the key bifurcations, but the inclusion of the nonlinear terms improves agreement with experiment in terms of amplitudes of motion and by capturing features of behaviour not hitherto predicted by theory.     

深紫外无机非线性光学晶体硼铍酸锶及其分子工程学探索方法

阐述了紫外无机非线性光学晶体分子工程学探索方法的基本特点，具体分析深紫外无机非线性光学晶体硼铍酸锶（ＳＢＢＯ）以氟硼铍酸钾（ＫＢＢＦ）为主要参考晶体的分子设计方法，随后根据晶体结构研究、单晶培养、和非线性光学性能测定等实验结果讨论ＳＢＢＯ作为新型深紫外无机晶体的主要优点，即它既具有更短的紫外吸收边（接近１５５ｎｍ）和较大的非线性光学系数（ｄ２２（ＳＢＢＯ）＝０６×ｄ２２（ＢＢＯ）＝１３８ｐｍ／Ｖ），同时晶体无明显层状习性，并肯有良好的化学稳定性和机械性能     

Multibody dynamics of aircraft occupants seated behind interior walls

To improve aircraft crash safety, conditions critical to occupants survival during a crash must be known. In view of the importance of this problem, studies of post-crash dynamic behavior of victims are necessary in order to reduce severe injuries. In this study, crash dynamics program SOM-LA/TA, incorporating a dynamic model of the human body with a finite element model of the seat structure was used. Modifications were performed in the program for reconstruction of an occupant's head impact with the interior walls or bulkhead. A viscoelastic-type contact force model was used to represent the compliance characteristics of the bulkhead. Correlated studies of analytical simulations with impact sled test results were accomplished. A parametric study of the coefficients in the contact force model was then performed in order to obtain the correlations between the coefficients and the Head Injury Criteria. A measure of optimal values for the bulkhead compliance and displacement requirements was thus achieved in order to keep the possibility of a head injury as little as possible. This information could in turn be used in the selection of suitable materials for the bulkhead, instrument panel, or interior walls of an aircraft.