RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Multi-dimple phenomena in TEHL point contacts

Theoretical analysis and experimental measurement of the multiple dimples in thermal elastohydrodynamic lubrication (TEHL) point contacts have been carried out. Good agreement is found between the theoretical and experimental results. A thermal multi-spike theory is proposed to explain the multi-dimple phenomena.     

On the structure formation of hydrophobed particles in the boundary layer of water and octane phases

Two-dimensional aggregation of the surface modified glass beads was carried out in the boundary layer of water and octane phases. The effect of particles' hydrophobicity was investigated on the structure of forming aggregates and the growth process. The structure of the aggregates and their growth were characterized by a density function which demonstrates the change of mean particle density as a function of aggregate size. The growth yielded fractal or nonfractal structures in the investigated systems. The fractal structure of the aggregates was observed to be dependent on restructuring processes controlled by the surface properties of the beads.The experimental results are compared with earlier findings for aggregation of hydrophobic beads in the boundary layer of water and air phases.On leave from Loránd Eötvös University, Budapest, Hungary     

A concept for bifocal contact‐ or intraocular lenses: liquid single crystal hydrogels (“LSCH”)

The synthesis of liquid single crystal hydrogels (“LSCH”) in suitable molds offers an innovative concept to realize bifocal contact‐ or intraocular‐lenses. LSCH combine the properties required for applications as bifocal ophthalmic lenses: the soft and water‐containing hydrogel enables oxygen permeation and exhibits high birefringence due to the liquid crystalline phase structure built up by rigid rod‐like amphiphiles. Via a photo‐initiated crosslinking reaction of aqueous solutions of monomeric lyotropic liquid crystalline amphiphiles in the macroscopically ordered liquid crystalline state, we obtain optically uniaxially ordered and transparent LSCH. The orientation process and the phase structure of the anisotropic hydrogel is analyzed by deuterium NMR‐spectroscopy. Copyright © 2002 John Wiley & Sons, Ltd.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Significant change in water contact angle of electrospray‐synthesized SiO2 films depending on their surface morphology

Amorphous SiO₂ films were deposited by means of an electrospray technique. The relation between the water contact angle (WCA) of the deposited SiO₂ films and the surface morphology is investigated. The feeding rate of the electrospray process greatly affects the morphology of the synthesized SiO₂ films. There is also a significant change in the WCA on the surface of the films: the rougher the surface, the greater the WCA. A model based on the Cassie–Baxter formulation is used to explain the change observed in the WCA on the SiO₂ films. Copyright © 2012 John Wiley & Sons, Ltd.     

一种不同地面分辨率图像的拼接算法

航空遥感监测中变焦镜头的广泛应用以及飞行高度的变化会获得不同地面分辨率的航空影像,因此为了实时监控到飞行区域的整体情况,需要对不同地面分辨率的图像进行拼接。提出了针对不同地面分辨率图像进行拼接的方法。首先用四分法对图像进行分割,检测变化倍率,选择配准策略;然后用基于加速鲁棒性特征(Speeded-Up Robust Features,SURF)的算法对相邻图像进行拼接。获得了焦距变化从高倍过渡到低倍,或从低倍过渡到高倍的拼接图像。通过航空变焦模拟影像的拼接实验和地面变焦影像的拼接实验表明,该方法能够对不同地面分辨率的图像进行拼接,且拼接结果均以高分辨率为基准。     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylenically unsaturated polycarbosiloxanes for novel silicone hydrogels: synthesis,end‐group analysis,contact lens formulations,and structure–property correlations

A series of novel mono‐ethylenically unsaturated polycarbosiloxanes macromonomers as compatibilizer materials for soft silicon hydrogels were prepared from the anionic ring‐opening polymerization (AROP) of 2,2,5,5‐tetramethyl‐2,5‐disila‐1‐oxacyclopentane followed by methacrylation. The characterization was performed by end‐group analysis and included the determination of molecular weight, molecular weight distributions, end‐group functionality, and impurity profiles using gas chromatography‐mass spectrometry, gel permeation chromatography, nuclear magnetic resonance, and matrix‐assisted laser desorption/ionization time of flight mass spectrometry. The synthetic procedure was optimized to minimize the formation of any dimer that would have the potential to act as a low molecular weight cross linker. In addition, the novel di‐ethylenically unsaturated polycarbosiloxanes were synthesized by cationic polymerization. Use of these silicone derivatives was explored in the formulation of contact lenses, and the structure–property relationship was examined. When copoymerized with hydrophilic monomers, these were able to give transparent and wettable films with desired properties, particularly a low moduli for contact lenses. Contact lens with high modulus is often shown to impart a higher degree discomfort when worn upon the eye. It was clear from the structure–property relationship that the modulus and the tensile strength of the formulated material depend on the nature and length of the polycarbosiloxane used and may be tuned for the purpose as needed. Copyright © 2013 John Wiley & Sons, Ltd.