低温固体界面间接触导热“hysteresis”现象的研究

文中以强化低温固体界面间的接触导热为出发点 ,实验测定了低温环境下两种金属界面在过度加载前后的接触热导值 ,指出过度加载是一种经济有效的强化导热方法 ,对卸载过程接触热导率大于同次加载过程接触热导的“hysteresis”现象产生机理进行了分析     

The Newton filtration and d-determination of bifurcation problems related to C~0 contact equivalence

In this paper, from the Newton filtration's point of view, we construct the singular Riemannian metric and use the method in singular theory to study the bifurcation problems, and give the sufficient condition of d-determination of bifurcation problems with respect to C0 contact equivalence. The special cases of the main result in this paper are the results of Sun Weizhi and Zou Jiancheng.     

超大规模集成电路光学光刻技术的现状与展望

光学光刻是目前超大规模集成电路(VLSI)制备中主要的微米和亚微米的图形加工技术,这一技术将继续保持其主导地位成为90年代VLSI发展的关键。本文综述了近年来光学光刻工艺的发展,主要介绍了G线(436nm)、Ⅰ线(365nm)和准分子激光光刻的现状,并对实现高的光学光刻分辨率所必须解决的透镜设计、套准精度和像场面积等问题作了详细描述。最后展望了发展方向、     

Certain condition on the second fundamental form of CR submanifolds of maximal CR dimension of complex Euclidean space

We treat m-dimensional real submanifolds M of complex space forms ̿M when the maximal holomorphic tangent subspace is (m−1)-dimensional. On these manifolds there exists an almost contact structure F which is naturally induced from the ambient space and in this paper we study the condition h(FX,Y)−h(X,FY) = g(FX,Y)η, η∊ T⊥(M), on the structure F and on the second fundamental form h of these submanifolds. Especially when the ambient space ̿M is a complex Euclidean space, we obtain a complete classification of submanifolds M which satisfy these conditions.Mathematics Subject Classifications (2000): 53C15, 53C40, 53B20.     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

Natural Operators Lifting Vector Fields to Bundles of Weil Contact Elements

Let A be a Weil algebra. The bijection between all natural operators lifting vector fields from m-manifolds to the bundle functor K ^A of Weil contact elements and the subalgebra of fixed elements SA of the Weil algebra A is determined and the bijection between all natural affinors on K ^A and SA is deduced. Furthermore, the rigidity of the functor K ^A is proved. Requisite results about the structure of SA are obtained by a purely algebraic approach, namely the existence of nontrivial SA is discussed.     

新型菲涅尔线聚焦聚光太阳电池组件研究

以聚甲基丙烯酸甲脂为材料,采用热压成型工艺加工成型线聚焦菲涅尔聚光透镜(8×),可用于空间、地面光伏系统太阳电池组件的聚光系统,并对在其聚光条件下,太阳电池的电流电压特性进行测试,结果表明,该菲涅尔线聚焦棱镜能有效提高太阳电池的单位输出功率.模具的机械加工精度和光学抛光精度低,是造成其部分聚光率损失的原因.     

Determination of contact stresses in problems on bending of a package of transversely isotropic bars

A mechanomathematical model for bending of packages of transversely isotropic bars of rectangular cross section is proposed. Adhesion, slippage, and separation zones between the bars are considered. The resolving equations for deflections and tangential displacements are supplemented with a system of linear differential equations for determining the normal and tangential contact stresses, and boundary conditions are formulated. A scheme for analytical solution of two contact problems—a package under the action of a distributed load and a round stamp—is considered. For these packages, a transition is performed from the initial system of differential equations for determining the contact stresses, where the unknown functions are interrelated by recurrent relationships, to one linear differential equation of fourth order and then to a system of linear algebraic equations. This transition allows us to integrate the initial system and get expressions for the contact stresses.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 761–778, November–December, 2004.     

大视场短焦距镜头CCD摄像系统的畸变校正

从光学测量角度出发,结合计算机视觉中的摄像机标定方法,解决了大视场短焦距镜头CCD摄像系统的畸变校正问题。与摄像机标定不同,畸变校正中仅标定内部参数,外部参数作为已知条件。采用线性畸变模型,由最小二乘法解线性方程组得到摄像系统畸变模型的畸变系数。介绍了数字图像中像素间距和光学中心的标定方法。通过比较由标定参数得到的畸变图像和摄像机采集的畸变图像对实验标定精度进行评定,实验结果表明边缘视场(112°)的标定精度达到了0 75%。