关于左手性介质几何光学的研究(一)

根据几何光学中的费马原理和完善成像原理研究了光线经过正负折射率界面时的传播特性,推导了单负折射率完善成像的曲面方程,讨论了单块负折射率透镜成像特性的一些缺陷及改进方案,依此指出了最短时间原理的适用范围的局限性和利用左手性介质制作光学器件的优越性,为进一步研究左手性介质的光学特性和相关光学器件设计提供了理论基础.     

基于平底孔反射体的双晶直探头测量模型

双晶探头在无损检测领域有着重要的应用,因而有必要建立一个超声测量模型来深入了解这类换能器的特点.通过将一个基于传递矩阵的多高斯声束模型和一个基尔霍夫近似方法获得的散射模型有效结合,建立了一个完整的纵波双晶直探头测量模型,用于预测平底孔缺陷体的回波信号.对比分析了平底孔反射回波信号的模型计算结果与实验测量结果,验证了该测量模型的准确性. 关键词： 超声测量模型 双晶直探头 多高斯声束模型     

免跟踪透射式太阳聚光器的设计

针对目前太阳聚光器中因为自动跟踪系统故障率高导致使用成本大幅度增加的主要制约因素,在多年来探讨有效提高太阳能密度的基础上,提出了免跟踪线性菲涅尔透射式太阳聚光器设计的新思路,并对其结构形式和工作原理进行了阐述.     

193nm光刻曝光系统的现状及发展

投影曝光工艺是集成电路制造过程中的关键环节,曝光系统的工艺水平已成为衡量微电子制造技术的重要标志。重点介绍了目前193 nm光刻设备曝光系统的发展现状和趋势,以及为提高曝光质量所采用的相关分辨率增强技术;通过分析曝光系统的构成和其中的关键技术,探讨了国内研制相关曝光设备所面临的挑战。     

193nm光刻曝光系统的现状及发展

投影曝光工艺是集成电路制造过程中的关键环节，曝光系统的工艺水平已成为衡量微电子制造技术的重要标志。重点介绍了目前193nm光刻设备曝光系统的发展现状和趋势，以及为提高曝光质量所采用的相关分辨率增强技术；通过分析曝光系统的构成和其中的关键技术，探讨了国内研制相关曝光设备所面临的挑战。     

Surface modification of polyamide 12 angioplasty balloons by photochemical reaction with an aromatic azide

Polyamide 12 (PA12) is used in a variety of applications when low moisture absorption, good dimensional stability, and toughness are required. Polyamide 12 is one of the polymers most frequently employed to fabricate angioplasty balloon catheters; however, its high hydrophobicity and chemical inertness require the application of coatings to make its surface more hydrophilic and biocompatible. In this work, an alternative method, based on the photochemical reaction of PA12 with a hydrophilic aromatic azide, was developed. Static and dynamic contact angle measurements evidenced that the surface modification process was able to improve PA12 wettability and that the effects were retained even after 12 months from surface treatment. Polyamide 12 modification resulted in an increase of its surface free energy, as evaluated by the van Oss, Good, and Chaudhury method. X‐ray photoelectron spectroscopy confirmed the presence of the aromatic azide on PA12 surface. Finally, compliance tests showed that the modification process did not reduce the mechanical performance of balloons.     

Interface effect between blue phosphorus and metals

The contacted properties of metal substrates with single layer (monolayer) blue phosphorus are calculated by first principles. We analyze the charge transfer, atomic orbital overlap, electronic properties and potential barrier at the interface of metal contacted blue phosphorene (BuleP) to understand how to effectively inject electrons from the metal into the contacted blue phosphorus. We inquire into interfacial effect of blue phosphorene directly in contact with five representative metallic substrates – Au (111), Ag(111), Al(111), Co(111) and Sc(0001), which are having minimal lattice mismatch with the BlueP. We find that the contact properties of these five metals are ohmic contact and schottky contact. Of the five different contact metals, Co-BlueP heterojunction has the best electrical conductivity. The lower SBH in the Al contact can also lead to a good substrate for a Schottky contact for the heterojunction. These results can provide guidance for the future design of BlueP-based electronic devices and for the exploration of new low-dimensional semiconductor transport processes.     

金属Al背电极二维AZO光栅的制备和陷光特性

研究了背电极金属Al膜上二维ZnO:Al光栅的制备及其反射光谱特性.在厚度为300 nm的Al膜上溅射80 nm ZnO:Al薄膜,旋涂AZ5206光刻胶,用波长为325 nm的激光进行光刻制作光栅掩模.采用溶脱-剥离法在Al衬底上制备周期(624~1250 nm)和槽深(100~300 nm)可独立调控的ZnO:Al二维光栅.表面形貌采用原子力显微镜和扫描电镜观察,反射光谱用带积分球的分光光度计测试,双向反射分布函数用散射仪测量.结果表明,300 nm Al膜上织构二维ZnO:Al光栅背电极结构,当光栅槽深为228 nm,周期从624 nm增加到986 nm时,背电极总反射率、漫反射率以及雾度均随光栅周期增大而显著增加,而当周期从986 nm增加到1250 nm时,总反射率、漫反射率以及雾度略有增加.双向反射分布函数测试结果进一步证实了上述实验结果,即随着周期增大,漫反射峰值越大,衍射峰个数也增多.提示背反电极上槽深为228 nm、周期为986 nm的二维ZnO:Al光栅具有较好的散射效果,其中漫反射占总反射的百分比为45%.     

Local atomic and electronic structure in the LiVPO4(F,O) tavorite-type materials from solid-state NMR combined with DFT calculations

⁷Li, ³¹P, and ¹⁹F solid-state nuclear magnetic resonance (NMR) spectroscopy was used to investigate the local arrangement of oxygen and fluorine in LiVPO₄F_1-yO_y materials, interesting as positive electrode materials for Li-ion batteries. From the evolution of the 1D spectra versus y, 2D ⁷Li radiofrequency-driven recoupling (RFDR) experiments combined, and a tentative signal assignment based on density functional theory (DFT) calculations, it appears that F and O are not randomly dispersed on the bridging X position between two X–VO₄–X octahedra (X = O or F) but tend to segregate at a local scale. Using DFT calculations, we analyzed the impact of the different local environments on the local electronic structure. Depending on the nature of the VO₄X₂ environments, vanadium ions are either in the +III or in the +IV oxidation state and can exhibit different distributions of their unpaired electron(s) on the d orbitals. Based on those different local electronic structures and on the computed Fermi contact shifts, we discuss the impact on the spin transfer mechanism on adjacent nuclei and propose tentative signal assignments. The O/F clustering tendency is discussed in relation with the formation of short V^IVO vanadyl bonds with a very specific electronic structure and possible cooperative effect along the chain.     

计算全息法测量长焦透镜面形和焦距

为了同时对长焦透镜的面形和焦距进行高精度检测,提出在Zygo干涉仪的球面光路中加入一个二元衍射元件作为检测件的计算全息法。 首先对计算全息法检测长焦透镜的面形和焦距进行了理论推导,并给出焦距误差公式。在Zemax中使用在平面基底上制作的二元衍射元件对一个长焦透镜的面形和焦距进行了模拟检测,其中对该长焦透镜面形的干涉检测PV值为0.0034λ,对焦距的检测精度为-0.11%。最后详细分析了两类误差对检测结果的影响,其中光学元件的位置误差影响不超过0.1λ;二元衍射元件的制造误差影响约0.01λ,在具体制造过程中,其径向位置误差和台阶误差可分别在2 μm和5 nm之内。在综合考虑各项误差的情况下,该方法的检测精度仍然可控制在2λ/25之内。