Influence of the Coordination of Donor Solvent Molecules to 1,4,7,10-Tetramethyl-1,4,7,10- tetraazacyclododecanenickel(II) and Analogous Nickel(II) Complexes on Their Steric Factors

Coordination equilibrium constants (K _NiS) of some donor solvent molecules to 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecanenickel(II) ([Ni(Me₄[12]aneN₄)]²⁺) were determined in nitrobenzene (a noncoordinating bulk solvent). The first (K _NiS1) and second stepwise coordination equilibrium constants (K _NiS2) for 1,4,7,10-tetraazacyclododecanenickel(II) ([Ni([12]aneN₄)]²⁺), 1,4,8,11-tetraazac yclotetradecane- nickel(II) ([Ni([14] aneN₄)]²⁺), 1,4,8,11-tetrathiacyclotetra-decanenickel(II) ([Ni([14]aneS₄)]²⁺) were also reinvestigated. The K _NiS values for [Ni(Me₄[12]aneN₄)]²⁺ were compared to those of [Ni([12]aneN₄)]²⁺, (1R,4S, 8R,11S)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecanenickel(II) (R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺), R,R,S,S-[Ni(Me₄[14]aneN₄)]²⁺, [Ni([14]aneN₄)]²⁺, and [Ni([14]aneS₄)]²⁺. Coordination of pyridine (Py), N,N,N′,N′-tetramethylurea (TMU), and N,N-dimethylacetamide (DMA) to [Ni(Me₄[12]aneN₄)]²⁺ was observed, although these donor solvent molecules did not coordinate to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺. The K _NiS values for Py, TMU, and DMA are 7.9, 2.8, and 9.0 dm³⋅mol⁻¹, respectively. Some hydrogen-bonding waters were coordinated to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺, but such waters did not coordinate to [Ni(Me₄[12] aneN₄)]²⁺. Also, the K _NiS2 values were larger than the corresponding K _NiS1 values for [Ni([14]aneS₄)]²⁺. Furthermore, the K _NiS1 values for [Ni([12]aneN₄)]²⁺ were the largest among these nickel(II) complex cations. The K _NiS, K _NiS1, and K _NiS2 values are discussed in terms of properties of the donor solvents and steric strains of these nickel(II) complex cations.     

Partial Molar Volumes of Amino Acids and Peptides in Aqueous Salt Solutions at 25°C and a Correlation with Stability of Proteins in the Presence of Salts

Partial molar volumes for a homologous series of amino acids and peptides have been measured in aqueous 1M sodium acetate, sodium thiocyanate, and sodium sulfate at 25^°C. These data have been utilized in conjunction with the data in water to deduce partial molar volumes of transfer V _2,m ⁰(tr) from water to these aqueous salt solutions. The volumes of transfer for the amino acids and peptides are found to be positive. The interpretation is that this result arises from the dominant interaction of the sodium salts with the charged centers of amino acids and peptides. Thermal denaturation of the structurally homologous proteins lysozyme and -lactalbumin has been studied in the presence of these salts. Significant thermal stabilization of hen egg-white lysozyme has been observed in the presence of sodium acetate and sodium sulfate. However, the thermal stabilization observed for -lactalbumin is very small in the presence of these salts and sodium thiocyanate leads to a lowering of its thermal denaturation temperature. The rise in the surface tension of aqueous salt solutions with salt concentration has been correlated with the calorimetric and volumetric measurements. The results show that V _2,m ⁰(tr) depends less on the type of electrolyte than on the ionic strength of the solution. The V _2,m ⁰(tr) values correlate very well with the increase in the surface tension of aqueous salt solutions, indicating significant role of surface tension in interactions of amino acids, peptides, or protein with the salts.     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Spectrophotometric Determination of Acidity Constants of 4‐(2‐Pyridylazo) Resorcinol in Various Micellar Media Solutions

Dissociation equilibria of 4‐(2‐pyridylazo) resorcinol (PAR) in aqueous micellar solutions were determined spectrophotometrically at 25 °C and at the constant ionic strength I = 0.1 M KNO₃. For this purpose, the effect of nonionic (Brij‐35, Triton X‐100, Triton X‐114, Triton X‐405), and anionic (SDS) surfactants on the absorption spectra of PAR at different pH values was studied. Results show that the pK_a values and pure spectra of each species of PAR are influenced by percentages of a neutral and an anionic surfactant such as Brij‐35, Triton X‐100, Triton X‐114, Triton X‐405 and SDS, respectively, added to the solution of this reagent.     

Determination of the complex formation constants for some water-soluble polymers with trivalent metal ions by differential pulse polarography

The formation of metal complexes between water-soluble polymers, poly(vinyl alcohol) [PVA], poly(N-vinylpyrrolidone) [PVP], poly(acrylamide) [PAAm] and poly(ethylene oxide) [PEO] with trivalent metal ions, Fe³⁺, Cr³⁺, and V³⁺ were studied by using differential pulse polarography (DPP). The general experimental observation is the shift of totally reversible reduction peaks (M³⁺+Hg+e^–M²⁺+Hg) towards more negative potentials when the complexing water-soluble polymers are added to the solution of trivalent metal ions. The negative shift in potential permitted the determination of complex formation constants (K_f) between trivalent metal ions and water soluble polymers. The complex formation constants for Fe³⁺, Cr³⁺, and V³⁺ ions with these polymers increased in the order of V³⁺>Cr³⁺>Fe³⁺.     

Enantioseparation of chiral N-imidazole derivatives by electrokinetic chromatography using highly sulfated cyclodextrins: mechanism of enantioselective recognition

Baseline separation of ten new substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives, with one chiral center, was achieved by CD-EKC using highly sulfated CDs (alpha, beta, gamma highly S-CDs) as chiral selectors. The influence of the type and concentration of the chiral selectors on the enantioseparations was investigated. The highly S-CDs exhibit a very high enantioselectivity power since they allow excellent enantiomeric resolutions compared to those obtained with the neutral CDs. The enantiomers were resolved with analysis times inferior to 2.5 min and resolution factors R(s) of 3.73, 3.90, 1.40, and 4.35 for compounds 1, 2, 3, and 5, respectively, using 25 mM phosphate buffer at pH 2.5 containing either highly S-alpha-CD, highly S-beta-CD, and highly S-gamma-CD (3 or 4% w/v) at 298 K, with an applied field of 0.30 kV/cm. The determination of the enantiomer migration order for the various analytes and the study of the analyte structure-enantioseparation relationships display the high contribution of the interactions between the analytes phenyl ring and the CDs to the enantiorecognition process. The thermodynamic study of the analyte-CD affinities permits us to improve our knowledge about the enantioseparation mechanism.     

Use of the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate in countercurrent chromatography

Room temperature ionic liquids (RTIL) are molten salts that are liquids at room temperature. Their liquid state makes them possible candidates as solvents in countercurrent chromatography (CCC), which uses solvents as both the mobile and stationary phases. The study focuses on 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), an easy to synthesize and purify RTIL whose melting point is –8°C. It is shown that BMIM PF₆ behaves like a solvent of significant polarity (comparable with that of ethanol). The ternary phase diagram water–acetonitrile–BMIM PF₆ is given, because it was necessary to add acetonitrile to reduce the ionic liquid viscosity. The 40:20:40% w/w water–acetonitrile–BMIM PF₆ biphasic liquid system was found to be appropriate as a biphasic liquid system for CCC. Different aromatic solutes, including bases, acids, and neutral compounds, were injected into the CCC column to estimate their distribution constants between the ionic liquid-rich phase and the aqueous phase. The resulting K_il/w constants were compared with the corresponding literature octanol–water partition coefficients, K_o/w. The important drawbacks in the use of RTIL in CCC are clearly pointed out: high viscosity producing pressure build-up, UV absorbance limiting the use of the convenient UV detector, and non-volatility precluding the use of the evaporative light-scattering detector for continuous detection.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.     

Molecular complexes of crown ethers. Part 3. Effect of cations on charge transfer complexes with TCNE

The intermolecular charge transfer complexes (CT) of two crown ethers (CE), viz, B15C5 and DB18C6 (as donors), and tetracyanoethylene (TCNE), as acceptor, were studied in the UV-visible region in dichloroethane (DCE), at 298.2 K. The sequence of addition of the cation was varied in the case of B15C5 such that in one system the sequence was (CE+Cation)+TCNE and in the other (CE+TCNE)+cation. These two systems were found to be non-interchangeable, even under reflux conditions, giving differentK _c values which were explained as being due to the different geometries of the CE. For the first sequence, the values most affected depended on the fit of the metal cation with the ether cavity, thus in B15C5, Na⁺ showed the greatest effect, while for DB18C6 it was K⁺.     

Analysis of critical points on the potential energy surface

A simple classification scheme is proposed for critical points, based only on rankr and signatures of the (n,n)-matrixG of harmonic force constants. The determination ofr ands, e.g. by the well-known factorizationG=L ^T gL (L: triangular matrix,g: diagonal matrix), has several theoretical as well as practical (computational) advantages over the inspection of eigenvalues ofG, so far used in quantum chemistry. The eigenvalues are sufficient butnot necessary for a classification whereas rank and signature are the only necessary and sufficient prerequisites for solving the task. For the purpose of presenting a working example, by calculating only a 2×2 torque constant matrix, it is shown that the coplanar ethylbenzene is unstable in the CNDO/2 picture.