Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

钛酸钾晶须界面性质研究

通过乳液聚合的方法对钛酸钾晶须进行表面改性,获得了表面包裹聚甲基丙烯酸甲酯的钛酸钾晶须. FT-IR、SEM、EDS的表征表明,钛酸钾晶须的表面包裹了聚甲基丙烯酸甲酯膜,形成了以钛酸钾晶须为核,聚甲基丙烯酸甲酯为壳的复合粒子.研究表明,改性后的晶须表面能降低,在有机溶液中的界面张力大大降低,与聚甲基丙烯酸甲酯的界面性质相似,说明改性后的晶须基本被聚甲基丙烯酸甲酯完全包裹,因此晶须由亲水性变为疏水性,在有机溶液中的分散性显著提高.     

邻位吡啶自由基多通道分解反应的动力学和反应机理研究

Utilizing Gaussian94 program package, all species involved in decomposition reactions of o-pyridyl radical were optimized fully at B3LYP/6-311＋＋G^＊＊ level. Intrinsic reaction coordinate calculations were employed to confirm the connections of the transition states and products, and transition states were ascertained by the number of imaginary frequency （0 or 1）. The reaction mechanism was elucidated by the vibrational mode analysis and electronic population analysis, and the reaction rate constants were calculated with transition state theory.     

Ab initio quantum chemical studies of the reactions of CF3CFHO2 with HO2

The potential energy surface (PES) for the CF₃CFHO₂+HO₂ reaction has been theoretically investigated using the DFT [B3LYP/6‐311G(d,p)] and B3LYP/6‐311++G(3df,3pd)//B3LYP/6‐311G(d,p) levels of theory. Both singlet and triplet PESs are investigated. The reaction mechanism on the triplet surface is simple. It is revealed that the formation of CF₃CFHOOH+³O₂ is the dominant channel on the triplet surface. On the basis of the ab initio data, the total rate constants for the reaction CF₃CFHO₂+HO₂ in the T = 210–500 K range have been computed using conventional transition state theory with Wigner's tunneling correction and have been fitted by a rate constant expression as k = 1.04 ×10^?12(cm³ molecule^?1 s^?1) exp (700.33/T). Calculated transition state rate constants with Wigner's tunneling correction for the reaction CF₃CFHO₂+HO₂ are in good agreement with the available experimental values. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Apparent Molar Volume, Heat Capacity, and Conductance of Lithium Bis(trifluoromethylsulfone)imide in Glymes and Other Aprotic Solvents

Lithium bis(trifluoromethylsulfone)imide (LiTFSI) is a promising electrolyte for high-energy lithium batteries due to its high solubility in most solvents and electrochemical stability. To characterize this electrolyte in solution, its conductance and apparent molar volume and heat capacity were measured over a wide range of concentration in glymes, tetraethylsulfamide (TESA), acetonitrile, -butyrolactone, and propylene carbonate at 25°C and were compared with those of LiClO₄ in the same solvents. The glymes or n(ethylene glycol) dimethyl ethers (nEGDME), which have the chemical structure CH₃–O–(CH₂–CH₂–O) _n –CH₃ for n = 1 to 4, are particularly interesting since they are electrochemically stable, have a good redox window, and are analogs of the polyethylene oxides used in polymer-electrolyte batteries. TESA is a good plasticizer for polymer-electrolyte batteries. Whenever required, the following properties of the pure solvents were measured: compressibilities, expansibilities, temperature and pressure dependences of the dielectric constant, acceptor number, and donor number. These data were used in particular to calculate the limiting Debye-Hückel parameters for volumes and heat capacities. The infinite dilution properties of LiTFSI are quite similar to those of other lithium salts. At low concentrations, LiTFSI is strongly associated in the glymes and moderately associated in TESA. At intermediate concentrations, the thermodynamic data suggests that a stable solvate of LiTFSI in EGDME exists in the solution state. At high concentrations, the thermodynamic properties of the two lithium salts approach those of the molten salts. These salts have a reasonably high specific conductivity in most of the solvents. This suggests that the conductance of ions at high concentration in solvents of low dielectric constant is due to a charge transfer process rather than to the migration of free ions.     

气相渗透法中的溶质吸附效应

在气相渗透仪上，用四个低分子量有机化合物和五个已知平均分子量的窄分布聚苯乙烯低聚体，对ＶＰＯ方法中的溶质吸附效应作了研究，提出了一种对吸附效应作改正的方法．所得结果表明，在扣除溶质吸附效应后，仪器常数Ｋ无分子量依赖性，提高了测定低分子量聚合物数均分子量的准确性．     

Association of hydrofluoric acid in NaCl aqueous media under hydrothermal conditions

The apparent association constant of hydrofluoric acid Q _HF ^' in 1m NaCl aqueous media has been determined potentiometrically at pressures up to 1 kbar and temperatures up to 250°C. A concentration cell employing hydrogen electrodes was used. The association of HF increases with increasing temperature but decreases with increasing pressure.     

On the determination of dynamic surface tensions by means of a modified bubble pressure method

A method for the determination of the dynamic surface tension of surfactant solutions is presented which allows to cover adsorption times down to 10 seconds. This method is based on the determination of the pressure inside two communicating bubbles. There is no deformation of the solution/air interface during the experimental procedure. Hence, in evaluating the kinetic data no surface area enlargement has to be taken into account. An automatically operating procedure should allow to cover adsorption times down to approximately one second and should improve the measuring accuracy substantially. Experimental investigations with aqueous n-decanoic acid solutions using the method proposed provided evidence that decanoic acid is adsorbed by a diffusioncontrolled mechanism.     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.     

γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.