40J激光装置研制

 报道了一台输出能量在40J量级的激光装置。该装置从星光Ⅱ激光装置分光作为光源,由放大器链、能源系统和支撑桁架等三大部分构成。对整个激光装置的模拟计算结果表明：装置的增益能力足够输出40J,B积分满足ΔB小于1.8的要求。研制了一种全腔水冷新型放大器,对其小信号增益系数和增益均匀性进行了测量,实验得出增益系数β为0.034cm ^-1,增益均匀性为91.84%。结果表明这种放大器完全能满足此激光装置的设计要求。     

Finite-difference approach for the high-precision analysis of rotating-frame diffusion images

A finite-difference approach has been developed for precisely determining diffusion coefficient and T₁ relaxation time in fluid samples analyzed by magnetization-grating rotating-frame imaging (MAGROFI) with either a surface coil or a toroid cavity detector (TCD). This approach avoids shortcomings of phenomenologically based approximations, such as neglect of sample geometries with singularities at the confines of the sample volume, and accounts for the diffusive edge enhancement observed in fluid imaging. Error limits are discussed. The new method has been applied to the determination of the self-diffusion coefficient for MAGROFI experiments using TCDs filled with acetone.     

改善高功率激光二极管阵列光束质量的一种新方法

根据波导模理论，推导了高功率激光二极管阵列的远场分布，根据其分布特点，设计了一种离轴外腔.运用这种外腔，在工作电流为17A时，光束的束宽积从自由运转时的1100mm·mrad减小到128mm·mrad，二极管阵列的光束质量提高了8.5倍左右，输出功率约为自由运转时的75%.     

聚心火焰在共振腔作用下引发爆轰的数值研究

 基于带化学反应的二维轴对称Euler方程，利用带有Superbee限制函数的波传播算法，对共振腔中的氢气-空气预混气的聚心燃烧进行了数值模拟，讨论了共振腔不同抛物面对起爆的影响。数值结果表明，在开始阶段，燃烧诱导的激波在轴心、火焰和固壁的反射，使火焰失稳，随后共振腔中的抛物壁面上产生一定频率和强度的反射激波，不断穿越火焰，使火焰进一步失稳，加剧了燃烧速度，最终导致爆轰的形成。同时，火焰在与激波的作用过程中，形状扭曲变形，呈封闭端小敞口端大的扁平头部蘑菇云。共振腔抛物面的不同形状引起激波聚焦位置的变化，会影响激波和火焰的相互作用，使起爆提前或推迟，甚至不起爆。     

Kerr介质中双原子-压缩真空场系统的腔场谱

研究了含Kerr介质腔中耦合双原子间与双模均处于压缩真空态的光场拉曼相互作用过程的腔场谱.通过求解本征方程导出了双模光场处于任意强度时腔场谱的计算公式,给出了数值计算结果.发现在两模初始场均为弱场时,Kerr介质和原子间的耦合作用对谱结构的影响较小;当双模初始场均为强场时,两模主峰的右侧出现了半梳状边峰,随Kerr效应的增强,峰间距逐渐加宽,并向高频方向扩展,在Kerr效应较强时,两模边峰的峰高出现高低相间的现象.     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

Boltzmann distribution of free energies in a finite-connectivity spin-glass system and the cavity approach

At sufficiently low temperatures, the configurational phase space of a large spin-glass system breaks into many separated domains, each of which is referred to as a macroscopic state. The system is able to visit all spin configurations of the same macroscopic state, while it can not spontaneously jump between two different macroscopic states. Ergodicity of the whole configurational phase space of the system, however, can be recovered if a temperature-annealing process is repeated an infinite number of times. In a heating-annealing cycle, the environmental temperature is first elevated to a high level and then decreased extremely slowly until a final low temperature T is reached. Different macroscopic states may be reached in different rounds of the annealing experiment; while the probability of finding the system in macroscopic state α decreases exponentially with the free energy F _α (T) of this state. For finite-connectivity spin glass systems, we use this free energy Boltzmann distribution to formulate the cavity approach of Mézard and Parisi [Eur. Phys. J. B, 2001, 20: 217] in a slightly different form. For the ±J spin-glass model on a random regular graph of degree K = 6, the predictions of the present work agree with earlier simulational and theoretical results.      

端面抽运四镜折叠腔Nd∶YVO4激光器的研究

基于传输矩阵理论,针对端面抽运的z型折叠腔Nd∶YVO4固体激光器的谐振腔设计进行了数值模拟,详细分析了腔内各参量对谐振腔稳定性的影响.由模拟结果推断,z型腔激光器具有两个稳区,并且稳区的范围可通过谐振腔各分臂的臂长来调节.利用相同的光学元件在不同的稳区范围设计了两种热稳腔,指出了长短腔型各自的利弊.实验考察了输出功率随腔长改变的变化情况,在不同腔长下的不同稳区分别获得了稳定的1 342 nm激光输出,谐振腔稳区范围的变化规律与理论计算基本符合.     

恒热流加热开口腔自然对流的可视化实验和数值模拟

本文采用激光全息干涉和激光片光照射烟可视化方法获得了恒热流加热的二维开口腔自然对流问题的温度场和流场,并进行了数值分析.实验结果与数值模拟结果吻合.数值计算表明方腔内流体的流通量与Ra*和深高比B有关,当Ra*＞104时随深高比B增加流通量增加;B×Nu与深高比B呈线性关系.利用B×Nu与深高比B的线性关系,通过引入当量导热系数λc,本文还给出了加热壁面的平均温度的简单计算方法.     

STF数字微波低电平系统研究

STF是KEK为国际直线对撞机(ILC)建立的试验装置. 在STF中, 数字微波低电平系统用于控制超导腔的RF相位和幅度. 在没有实际腔运行的情况下, 设计了一个基于FPGA技术的实时超导腔模拟器, 用于测试微波低电平系统的硬件和算法. 超导腔的数字控制器用FPGA实现, 其中采用了PI反馈控制和前馈控制算法. 测试表明, 超导腔模拟器和控制器都工作良好, 可用于STF微波低电平系统的进一步开发.