Thermotropic gelation of ovalbumin 1. Viscoelastic properties of gels as a function of heating conditions and protein concentration at various pH values

A study has been undertaken of stress relaxation in ovalbumin thermotropic gels with a concentration of 8–20%, depending on time and temperature of heating (respectively, 20–60 min, 70°–110°C), at pH 2.5–10.0. In all instances, the dependence of the initial gel elasticity modulus on heating has a single maximum. Gelation conditions corresponding to this maximum are considered optimal. Optimal gelation time is 30 min, regardless of pH. On the other hand, the optimal heating temperature depends on pH. To the right and left of the isoelectric point of protein (2.5pH<4.0 and 5.5G) of gels on heating conditions, pH and protein concentration (X ₁,X ₂,X ₃,X ₄), as well as on time of relaxation (t) may be generally described asG(X ₁,X ₁,X ₁,X ₁,t)=G _e(X ₁,X ₂,X ₃,X ₄)f(t), whereG _e is the equilibrium value of the elasticity modulus, and f(t) the relaxation function. Thus, a change in the parameters only affects the value of the equilibrium elasticity modulus, and exerts no effect on the relaxation time spectrum. For this reason, all the relaxation curves obtained may be transformed into two normalized relaxation functions:f(t)=f(t)/f(1)=G(X ₁,X ₂,X ₃,X ₄,t)/G(X ₁,X ₂,X ₃,X ₄, 1)Each of these normalized functions corresponds to one of the homologous groups. Rheological similarity of gels in each homologous group evidently points to their structural similarity. Invariance of the gel relaxationproperties with regard to protein concentration, leads to a concentration dependence of the equilibrium modulus at various pH values. These dependences are curvilinear on a double logarithmic scale. The slope of the curve exceeds 2 in the entire concentration interval studied. In other words, the dependences obtained cannot be described by the usual law of squares. On the other hand, they adequately match Hermans theoretical relation for a network formed by random association of identical polyfunctional particles without cyclization. This simple model evidently gives a true picture of the major regularities of thermotropic gelation for ovalbumin. An agreement between this theory and experiment was achieved for a protein concentration ofC ^*=6.0±1.0% at the gel point regardless of pH. Invariance of gelpoint position with regards to pH demands further confirmation.List of symbols T _h,t _h heating temperature and time - T _h ^* ,t _h ^* optimal heating temperature and time - C protein concentration - C ^* protein concentration in gel-point - G relaxation modulus - G _e equilibrium modulus - f(t) relaxation function - t time of relaxation - f(t) normalized relaxation function - fT _A (t), f _B (t) normalized relaxation functions of groups A and B - G ₁ T _h,t _h-reduced modulus - G ₂ T _h,t _h, pH-reduced modulus - G ₃ C-reduced modulus - b ₁ T _h, t_h reduction parameter of modulus - b ₂ pH reduction parameter of modulus - b ₃ C reduction parameter of modulus - W_g gel-fraction     

聚合物体系散射函数的热力学基础

利用链段浓度和链头浓度的概念，根据热力学涨落理论，给出了聚合物二元共混体系ｄｅＧｅｎｎｅｓ散射函数的一个普遍的热力学证明，指出了这个函数和Ｆｌｏｒｙ－Ｈｕｇｇｉｎｓ共混自由能公式一样，也依赖于忽略构象涨落的假设．     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Use of intermittent jets to enhance flux in crossflow filtration

This paper deals with the influence of a new flow unsteadiness on the permeate fluxes in crossflow filtration. A pneumatically controlled valve generates intermittent jets from the main flow, causing the formation of large vortices moving downstream along the tubular membrane. The main results of the numerical calculation of such flows are given. The experimental study was carried out by filtering a bentonite suspension through an ultrafiltration mineral membrane. Time evolutions of flux were achieved in steady and unsteady operating conditions. Results concerning the influence and limits of the nozzle to tube diameter ratio and the jet velocities are discussed. The applicability of such an unsteady flow is examined with a view to effects on energy consumption and possible viscosity effects.     

Correction for the Concentration Polarization for Simultaneous Reduction of Several Reactants: Platinum(II) Aquachloride Complexes

The reaction of electroreduction of platinum(II) aquachloride complexes on a negatively charged dropping mercury electrode is used to determine specific features of interpretation of experimental data in the case of parallel conversion of several forms of a reactant, connected with the manner of introducing a correction for the concentration polarization. The difference in the charges of species undergoing simultaneous reduction gives rise to ambiguity when analyzing kinetic data on the dependence of current on the supporting-electrolyte concentration at constant electrode charge. A new self-consistent technique for deducing model parameters (ratio between reactant discharge rate constants) is proposed.     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

Thermoreversible gelation of polyacrylonitrile/dimethylformamide-solution

The thermoreversible gelation of semi-diluted atactic polyacrylnitrile (PAN)/dimethylformamide (DMF)-solutions has been studied. The structural features of PAN/DMF-gels, formed by supercooling have been investigated by DSC-, x-ray- and swelling measurements. A new structural model has been introduced to describe the morphology of the junction zones of PAN/DMF-gels and to also explain the gelation behavior of PAN/DMF-solutions as the structural features of PAN/DMF-gels. The junction zones of a PAN/DMF-gel have been defined as ordered junction zones.A gelation enthalpy of about H=–6 kJ/mol supports the idea that an ordered junction zone is formed by intermolecularly neighboring stereoregular parts of atactic PAN chains due to a nucleation process in the solution. It can be defined as a strongly distributed fringed micelle.     

Theoretical approach and the practice to the evaluation of structural parameters characterizing concentration polarization alongside ion-exchange membranes by means of dielectric measurement

As the application of a dielectric theory proposed previously (J Membrane Sci 64:153–161 (1991)), theoretical formulation and the practical procedure of dielectric analysis are developed to calculate the structural parameters such as the conductivity gradient and the thickness of the concentration polarization layer, the capacitances and the conductances of the two adjoining aqueous phases from the observed dielectric parameters. The procedure of calculation consequent upon the theoretical formulation was applied to double relaxation data observed for cation-exchange membrane systems under application of d.c. bias voltage. As a consequence, the structural parameters of concentration polarization were readily obtained with accuracy.     

在"高聚物的结构与性能"课程中应该引入的几个新概念

在“高聚物的结构与性能”课程教学中，很有必要向学生介绍高分子科学近十几年来的发展，尤其是在高分子凝聚态基本物理问题上的研究成果以及相关的新概念、新知识，特别是我国学者的贡献。本文较为详细地讨论了近年来作者在教学中介绍的几个新概念，如：动态接触浓度、单链凝聚态、凝聚缠结等。