0.73 J脉冲能量KrF准分子激光器的特性

研制了一台KrF大能量准分子激光器,激光器采用紧凑型Chang电极与紫外火花预电离的结合, 实现了激活区大面积的均匀辉光放电,利用LC反转倍压以及一级磁脉冲压缩技术在放电电容上实现了峰值电压40 kV、脉冲上升时间约为100 ns的高压快脉冲激励。研究了工作气体含量对激光器能量输出的影响,在总气压3.3105 Pa,F2/He, Kr, Ne体积分数比值为1.97∶3.18∶94.85,充电电压27 kV时,得到了738 mJ的单脉冲能量输出,激光近场光斑30 mm14 mm,在充电电压23 kV时,全电效率最高,达到2.0%。     

Prediction of the critical buckling load of multi-walled carbon nanotubes under axial compression

In this paper, we propose a new explicit analytical formula of the critical buckling load of double-walled carbon nanotubes (DWCNT) under axial compression. This formula takes into account van der Waals interactions between adjacent tubes and the effect of terms involving tube radii differences generally neglected in the derived expressions of the critical buckling load published in the literature. The elastic multiple Donnell shells continuum approach is employed for modelling the multi-walled carbon nanotubes. The validation of the proposed formula is made by comparison with a numerical solution. The influence of the neglected terms is also studied.     

Production of Mesoglycan/PCL Based Composites through Supercritical Impregnation

The development of targeted therapies for wound repair is knowing a growing interest due to the increasing aging of the population and the incidence of chronic pathologies, mainly pressure ulcers. Among molecules recruiting cell populations and promoting the formation of new vital tissue, sodium mesoglycan (MSG) has been proven to be effective in wound healing. In this work, MSG impregnation of polymer matrices has been attempted by a supercritical carbon dioxide-based process. Polymeric matrices are composed of polycaprolactone blends, where water-soluble polymers, polyethylene glycol, polyvinyl pyrrolidone, gelatin, and thermoplastic starch, have been employed to modulate the MSG release, making the devices potentially suitable for topical administrations. Two different techniques have been used to obtain the films: the first one is compression molding, producing compact and continuous structures, and the second one is electrospinning, producing membrane-like designs. A higher amount of MSG can be loaded into the polymeric matrix in the membrane-like structures since, in these films, the impregnation process is faster than in the case of compression molded films, where the carbon dioxide has firstly diffused and then released the active molecule. The type of water-soluble polymer influences the drug release rate: the blend polycaprolactone-gelatin gives a prolonged release potentially suitable for topical administration.     

Dynamic compressive responses of intact and damaged ceramics from a single split Hopkinson pressure bar experiment

A novel dynamic compressive experimental technique has been developed based on a split Hopkinson pressure bar. This new method dynamically loads the ceramic specimen by two consecutive stress pulses. The first pulse determines the dynamic response of the intact ceramic materiaal and then crushes the specimen, and the second pulse determines the dynamic compressive constitutive behavior of the ceramic rubble. Precise pulse shaping ensures that the specimen deforms at nearly constant strain rates under dynamic stress equilibrium during the loading by both stress pulses. Pulse shaping also controls the amplitudes of loading pulses, the values of strain rates, the maximum strains in the rubble specimens, and the proper separation time between the two loading pulses. The feasibility of the new technique is demonstrated by the experimental results obtained on an AD995 alumina.     

OBSERVATIONS ON DEFORMATION BEHAVIOR OF HIGH PERFORMANCE FIBERS BY POLARIZING OPTICAL MICROSCOPY

By means of polarizing optical microscopy (POM), deformation behavior of four kinds of fibers, i.e. ultra highmolecular weight polyethylene (UHMW-PE) fiber, polyvinyl alcohol (PVA) fiber, polyethylene terephthalate (PET) fiber,and wholly aromatic (p-hydroxybenzoic acid/2-hydroxy-6-naphthoic acid) copolyester [P(HBA/HNA)]/PET (ACPET blend)fiber, in axial compression, axial impacting, and bending was observed. In compression, kink bands formed at an angle of55～60° to the fiber axis in 10-times-drawn UHMW-PE fiber, 75～80° in 40-times-drawn sample, 80° in PVA fiber, and 90°in the ACPET blend fiber. In impacting and bending, band angles of UHMW-PE, PVA and PET fibers are nearly the same asthose formed in compression, indicating that slip systems do not change. For any of the four kinds of fiber, band spacingexhibits great differences in compression, in impacting, and in bending, which may be attributed to the differences in thedegrees of strain or stress concentration.     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

傅立叶变换-主成份分析方法用于二维色谱数据的压缩和重构

结合傅立叶变换（ＦＴ）和主成份分析（ＰＣＡ）技术,实现了二维高效液相色谱数据的压缩和重构,并对不同信噪比的二维色谱测量数据进行了处理,即使对原始数据的压缩比高达２００倍,仍能很好地重构原始数据,当原始数据的信噪比较低时,阈值的选择受大振幅噪音的影响,使压缩比略有下降,但仍然能够保持信号基本不失真。     

Wrinkle morphologies with two distinct wavelengths

Wrinkles with two distinct wavelengths formed sequentially on the same surface are investigated. A series of aligned wrinkles are formed through local strain application on a partially crosslinked elastomer. After the formation of these primary wrinkles, the elastomer is fully crosslinked, and a mechanical compressive strain is applied to the sample orthogonal to the primary wrinkles. This mechanical strain results in smaller secondary wrinkles superimposed on the larger primary aligned wrinkles. Resulting biaxial morphologies suggest that the primary pattern directs the formation of the smaller wrinkles. The modulus mismatch of the substrate on primary and secondary wrinkle formation dictates the ratio between the two resulting wavelengths, as well as the specific biaxial morphologies, ranging from zigzag ridges to ellipsoidal bumps or corn‐on‐the‐cob structures to the classic herringbone. The sequential strain wrinkling process has the potential to be used on an industrial scale for the facile formation of surface topography with two discrete, tunable lateral dimensions over large surface areas. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A Pressure-Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure-induced disordering could require recognition of an order–disorder transition in solid-state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B-site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long-range ferrimagnetic ordering in the B-site ordered samples are gradually overwhelmed by B-site disorder. Theoretical calculations suggest that unusual unit-cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.     

Multivariate calibration of near infrared spectra by orthogonal WAVElet correction using a genetic algorithm

Orthogonal WAVElet correction (OWAVEC) is a pre-processing method aimed at simultaneously accomplishing two essential needs in multivariate calibration, signal correction and data compression, by combining the application of an orthogonal signal correction algorithm to remove information unrelated to a certain response with the great potential that wavelet analysis has shown for signal processing. In the previous version of the OWAVEC method, once the wavelet coefficients matrix had been computed from NIR spectra and deflated from irrelevant information in the orthogonalization step, effective data compression was achieved by selecting those largest correlation/variance wavelet coefficients serving as the basis for the development of a reliable regression model. This paper presents an evolution of the OWAVEC method, maintaining the first two stages in its application procedure (wavelet signal decomposition and direct orthogonalization) intact but incorporating genetic algorithms as a wavelet coefficients selection method to perform data compression and to improve the quality of the regression models developed later. Several specific applications dealing with diverse NIR regression problems are analyzed to evaluate the actual performance of the new OWAVEC method. Results provided by OWAVEC are also compared with those obtained with original data and with other orthogonal signal correction methods.