重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.     

Biofuels–Renewable Energy Sources: A Review

Biodiesel is biodegradable and nontoxic, and it significantly reduces toxic and other emissions when burned as a fuel. The advantages of biodiesel as diesel fuel are its portability, ready availability, renewability, higher combustion efficiency, non-toxicity, higher flash point, and lower sulfur and aromatic content, higher cetane number, and higher biodegradability. The major disadvantages of biodiesel are its higher viscosity, lower energy content, higher cloud point and pour point, higher nitrogen oxide (NO_x) emissions, lower engine speed and power, injector coking, engine compatibility, high price, and greater engine wear. The technical disadvantages of biodiesel/fossil diesel blends include problems with fuel freezing in cold weather, reduced energy density, and degradation of fuel under storage for prolonged periods. The sources of biodiesel are vegetable oils and fats. The direct use of vegetable oils and/or oil blends is generally considered to be unsatisfactory and impractical for both direct injection and indirect type diesel engines because of their high viscosities and low volatilities injector coking and trumpet formation on the injectors, higher level of carbon deposits, oil ring sticking, and thickening and gelling of the engine lubricant oil, acid composition. Biodiesel is obtained by transesterifying triglycerides with methanol. A popular variation of the batch transesterification process which needs high alcohol/acid ratio (several separation problems and high corrosivity and toxicity) is the use of continuous stirred tank reactors in series. This continuous process is heterogeneous and is based on reactive distillation. The key factor is the selection of the right and effective solid catalyst which leads to reduction of energy consumption and investments at all.     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

Strong Morphological Effect of Mn3O4 Nanocrystallites on the Catalytic Activity of Mn3O4 and Au/Mn3O4 in Benzene Combustion

Gold nanoparticles (3–4 nm) were deposited on Mn₃O₄ nanocrystallites with three distinct morphologies (cubic, hexagonal, and octahedral). The resulting structures were characterized, and their activities for benzene combustion were evaluated. The dominant exposed facets for the three kinds of Mn₃O₄ polyhedrons show the activity order: (103)≈(200)>(101). A similar activity order was derived for the interfaces between the Au and the Mn₃O₄ facet: Au/(200)≈Au/(103)>Au/(101). The metal–support interactions between the Au nanoclusters and specific facets of the Mn₃O₄ polyhedrons lead to a unique interfacial synergism in which the electronic modification of the Au nanoparticles and the morphology of the Mn₃O₄ substrate have a joint effect that is responsible for a significant enhancement in the catalytic activity of the Au/Mn₃O₄ system.     

固态研磨-燃烧法制CuO-ZnO-ZrO2/HZSM-5二甲醚合成催化剂

以柠檬酸为燃烧剂,采用固态研磨-燃烧法和机械混合法制备了CuO-ZnO-ZrO2/HZSM-5CO2加氢一步合成二甲醚双功能催化剂.采用固定床反应器,在反应温度270℃、压力为3.0 MPa、空速4 200 h-1条件下,考察了催化剂对CO2加氢一步合成二甲醚的反应性能,并采用XRD、BET、H2-TPR、NH3-TPD及XPS对催化剂的结构进行了表征.评价结果表明:随柠檬酸量的增加,二甲醚选择性和收率呈峰形变化趋势;当柠檬酸的量等于化学计量比的100%时,制备的催化剂具有较好的催化性能:CO2单程转化率为24.8%、二甲醚(DME)的选择性和收率分别为35.3%和8.7%.表征结果表明:柠檬酸的量影响催化剂的比表面积、还原性能以及CuO和ZnO的晶粒尺寸等,进而影响催化剂反应性能.     

The READY program: Building a global potential energy surface and reactive dynamic simulations for the hydrogen combustion

READY (REActive DYnamics) is a program for studying reactive dynamic systems using a global potential energy surface (PES) built from previously existing PESs corresponding to each of the most important elementary reactions present in the system. We present an application to the combustion dynamics of a mixture of hydrogen and oxygen using accurate PESs for all the systems involving up to four oxygen and hydrogen atoms. Results at the temperature of 4000 K and pressure of 2 atm are presented and compared with model based on rate constants. Drawbacks and advantages of this approach are discussed and future directions of research are pointed out. © 2014 Wiley Periodicals, Inc.     

大同烟煤增压富氧燃烧过程中硫、氯和氟的析出特性

利用高压热重结合傅里叶红外研究了大同烟煤在增压富氧燃烧过程中硫、氯和氟的释放行为,主要考察压力对其析出特性的影响。实验结果表明,压力的改变对煤中硫、氯和氟的迁移转化均有显著影响。随着压力的升高,黄铁矿硫向COS等中间产物的转化率逐渐增加,导致SO2的收率逐步上升,但在3 MPa时,燃煤SO2收率却有所降低。此外,压力升高后反应气氛中CO分压的增加促进了COS的生成,导致其收率逐渐上升。因为煤中有机氯析出和转化与挥发分的释放密切相关,所以高压下挥发分释放量的增加使得煤中有更多的有机氯析出并转化为HCl,而且压力升高后,挥发分燃烧速率和温度的升高促进了无机氟化物分解,HF生成量相应增加。此外,高压下水解反应的强化也提高了HF的收率。     

Magnetic and dielectric response of M-type barium hexaferrite

Barium hexaferrite (BaFe₁₂O₁₉) is a promising candidate for ceramics, microwave devices and numerous applications. Barium hexaferrite was synthesised via the sol-gel auto-combustion technique using glycine fuel. The X-ray diffraction technique confirmed the hexagonal structure of the particles with space group P63/mmc. The morphological analysis was performed using the field-emission scanning microscope, and the images displayed the plate-like particle formation. Transmission electron microscopy was employed to determine the average particle size of the sample, which was estimated to be 155.93 nm. The magnetic studies were taken through the vibrating sample magnetometer (VSM) at 300 K, with which the saturation magnetization (M_s), coercivity (H_c), squareness ratio (M_r/M_s), and energy product (BH_max) was calculated, and the particles were validated to be in single domain arrangement. The dielectric properties were investigated through the LCR meter. Koop and Maxwell-Wagner's model was used to interpret charge conduction and the occurrence of relaxations in the system.     

The slowly reacting mode of combustion of gaseous mixtures in spherical vessels. Part 1: Transient analysis and explosion limits

Frank-Kamenetskii's analysis of thermal explosions is revisited, using also a single-reaction model with an Arrhenius rate having a large activation energy, to describe the transient combustion of initially cold gaseous mixtures enclosed in a spherical vessel with a constant wall temperature. The analysis shows two modes of combustion. There is a flameless slowly reacting mode for low wall temperatures or small vessel sizes, when the temperature rise resulting from the heat released by the reaction is kept small by the heat-conduction losses to the wall, so as not to change significantly the order of magnitude of the reaction rate. In the other mode, the slow reaction rates occur only in an initial ignition stage, which ends abruptly when very large reaction rates cause a temperature runaway, or thermal explosion, at a well-defined ignition time and location, thereby triggering a flame that propagates across the vessel to consume the reactant rapidly. Explosion limits are defined, in agreement with Frank-Kamenetskii's analysis, by the limiting conditions for existence of the slowly reacting mode of combustion. In this mode, a quasi-steady temperature distribution is established after a transient reaction stage with small reactant consumption. Most of the reactant is burnt, with nearly uniform mass fraction, in a subsequent long stage during which the temperature follows a quasi-steady balance between the rates of heat conduction to the wall and of chemical heat release. The changes in the explosion limits caused by the enhanced heat-transfer rates associated with buoyant motion are described in an accompanying paper.