Flux and fluence dependence of disorder produced during implantation of 11B in silicon

The flux and fluence dependence of disorder produced in silicon during the implantation of ¹¹B has been investigated at room temperature, -50°C. and -120°C. Implantations were carried out with 200 keV ¹¹B ions using current densities in the range from 0.06μA/cm² to 15μA/cm², and the disorder monitored by measuring the energy spectra of backscattered protons which were incident on the sample at 450 keV parallel to a (110) axis. Significant differences in the dependence of the disorder on ¹¹B flux and fluence were observed between the implantations performed at room temperature and those carried out at the two lower temperatures.     

Fingerprint image enhancement using data driven Directional Filter Bank

A new method based upon data driven tool, principal component analysis (PCA), for fingerprint enhancement is proposed in this paper. PCA is a very useful statistical technique that has found application in many different fields like image compression, face recognition and is commonly used for finding patterns in data of high dimension. In the proposed method, the input image is first decomposed into directional images using decimation free Directional Filter Bank (DDFB). Then these directional images are normalized. A data driven technique PCA is applied to these normalized directional fingerprint images, which gives the PCA filtered images. These are basically directional images. Then these directional images are reconstructed into one image which is the enhanced one. Simulation results are included illustrating the capability of the proposed method.     

Color centers in irradiated MgF2

Abstract

Color centers in rutile-structured MgF₂ single crystals irradiated at 20K/360K by reactor neutrons are investigated spectroscopically at LNT. Four different types of the F-F vacancy bond in MgF₂ are possibly identified to the observed absorption bands as due to the F₂ centers; instead of previous assignments, the 300nm band to the F₂(D_2h), the 325nm band to the F₂(C₁), the 355nm band to the F₂(C_2v), and the 400nm band to the F₂(C_2h) centers.     

Experimental investigation of the effect of temperature on the strength of polyimide contact structures

A new photogrammetry based measurement technique for contact areas in line contact structures is developed. From the data collected by this technique, a method for measuring the contact strength of contact structures in high temperature applications is proposed. The contact strength of a line contact structure of polyimide at different temperatures is measured; the results show that the increase in temperature decreases the contact strength of the structure. The effect of temperature on the contact strength is studied by investigating the occurrence and evolution of yielding core within the structure at different temperatures. The decrease in the yield strength and elastic modulus of the polyimide material at high temperature induces core yielding at lower loads and eases the propagation of core yielding to the surface.     

Good match exploration for thermal infrared face recognition based on YWF-SIFT with multi-scale fusion

Stable local feature detection is a critical prerequisite in the problem of infrared (IR) face recognition. Recently, Scale Invariant Feature Transform (SIFT) is introduced for feature detection in an infrared face frame, which is achieved by applying a simple and effective averaging window with SIFT termed as Y-styled Window Filter (YWF). However, the thermal IR face frame has an intrinsic characteristic such as lack of feature points (keypoints); therefore, the performance of the YWF-SIFT method will be inevitably influenced when it was used for IR face recognition. In this paper, we propose a novel method combining multi-scale fusion with YWF-SIFT to explore more good feature matches. The multi-scale fusion is performed on a thermal IR frame and a corresponding auxiliary visual frame generated from an off-the-shelf low-cost visual camera. The fused image is more informative, and typically contains much more stable features. Besides, the use of YWF-SIFT method enables us to establish feature correspondences more accurately. Quantitative experimental results demonstrate that our algorithm is able to significantly improve the quantity of feature points by approximately 38%. As a result, the performance of YWF-SIFT with multi-scale fusion is enhanced about 12% in infrared human face recognition.     

A new color image cryptosystem via hyperchaos synchronization

This paper proposes a novel color image cryptosystem based on synchronization of two different six-dimensional hyperchaotic systems. In the transmitter end, we apply the drive system to generate the diffusion matrices and scrambling ones, which are used to change the image pixel value and position, respectively. Thus the ciphered image is obtained. In the receiver, synchronization of two nonidentical hyperchaotic systems can be achieved by designing the appropriate controllers. The response system is employed to yield the corresponding diffusion matrices and scrambling ones using the same generation method in the encryption algorithm. Then the cipher-image can be decrypted by the decryption algorithm, which is similar to that of the encryption process but in the reversed order. The experimental results show that the presented image cryptosystem has high security and can resist noise and crop attacks.     

基于COSM的三维显微图像复原算法研究

光学分层显微成像技术(COSM)不仅可用于去除非聚焦层杂散光的影响以及噪声的干扰,而且能复原样本的清晰三维像,将成为提取微流体的三维温度和速度场分布信息的有效工具.本文研究了基于已知点扩展函数的6种COSM成像算法,详细讨论了6种COSM成像算法的原理和实现,构造了三维样本图像和点扩展函数模型,并对复原结果进行了分析....     

局部方差在图像质量评价中的应用

将灰度图像的局部方差分布（QLS）作为表征图像结构信息的一个重要特征,对局部方差分布矩阵进行奇异值分解,计算得到相应的奇异值特征向量;通过计算降质图像与原参考图像局部方差矩阵奇异值特征向量的夹角大小度量两图像的结构相似度,实现了对降质图像的质量评价。实验结果表明：局部方差分布更能突出图像的结构特征,评价结果优于传统的均方误差（MSE）、峰值信噪比（PSNR）、结构相似度（SSIM）以及直接评价图像像素分布的奇异值分析（SVD）等方法,与人眼视觉感知效果的一致性较好。     

Optical extensometer and elimination of the effect of out-of-plane motions

A novel optical extensometer is developed to estimate the local uniform strain on planar surface accurately. The proposed system consists of a shared large format lens and two image sensors, which acquire pairs of images of two isolated small regions on the object surface simultaneously. Digital image correlation (DIC) algorithm is applied to determine the relative displacement between gauge points designated on recorded pairs of images. Then local strain can be extracted after dividing the relative displacement by the scale distance. Moreover, a special experimental setup called “correction sheet” is used to eliminate the virtual strain induced by out-of-plane motions. Uni-axial tensile experiments are performed to validate the reliability and resolution of the optical extensometer, and the measurement results demonstrate that the resolution of the optical extensometer achieves 2–3 με.     

Gaussian pre-filtering for uncertainty minimization in digital image correlation using numerically-designed speckle patterns

This paper discusses the effect of pre-processing image blurring on the uncertainty of two-dimensional digital image correlation (DIC) measurements for the specific case of numerically-designed speckle patterns having particles with well-defined and consistent shape, size and spacing. Such patterns are more suitable for large measurement surfaces on large-scale specimens than traditional spray-painted random patterns without well-defined particles. The methodology consists of numerical simulations where Gaussian digital filters with varying standard deviation are applied to a reference speckle pattern. To simplify the pattern application process for large areas and increase contrast to reduce measurement uncertainty, the speckle shape, mean size and on-center spacing were selected to be representative of numerically-designed patterns that can be applied on large surfaces through different techniques (e.g., spray-painting through stencils). Such “designer patterns” are characterized by well-defined regions of non-zero frequency content and non-zero peaks, and are fundamentally different from typical spray-painted patterns whose frequency content exhibits near-zero peaks. The effect of blurring filters is examined for constant, linear, quadratic and cubic displacement fields. Maximum strains between ±250 and ±20,000 µε are simulated, thus covering a relevant range for structural materials subjected to service and ultimate stresses. The robustness of the simulation procedure is verified experimentally using a physical speckle pattern subjected to constant displacements. The stability of the relation between standard deviation of the Gaussian filter and measurement uncertainty is assessed for linear displacement fields at varying image noise levels, subset size, and frequency content of the speckle pattern. It is shown that bias error as well as measurement uncertainty are minimized through Gaussian pre-filtering. This finding does not apply to typical spray-painted patterns without well-defined particles, for which image blurring is only beneficial in reducing bias errors.