不同调光方式LED照射下的人体非视觉效应

分别采用模拟调光和PWM调光方式实现LED光调节。采用生理参数法,以在校大学生为研究对象,选择3种色温(3 000,5 600,6 500 K)LED光源,在3种照度(300,500,800 lx)水平下,对8名(5男,3女)受测者在实验前后的脉搏和瞳孔进行测量。选择同样3种色温LED光源,分别采用两种调光方式添加蓝光(464nm,20 lx)实现300 lx的照明环境,对12名(8男,4女)受测者在实验前后的脉搏和瞳孔进行测量。结果表明:两种调光方式实现的LED光环境对人体脉搏变化率和瞳孔收缩率的影响均没有显著性差异;在测试照明环境中添加蓝光,可引起人体脉搏变化率和瞳孔收缩率增大,峰值处分别增加约6%和9%。     

Flux and fluence dependence of disorder produced during implantation of 11B in silicon

The flux and fluence dependence of disorder produced in silicon during the implantation of ¹¹B has been investigated at room temperature, -50°C. and -120°C. Implantations were carried out with 200 keV ¹¹B ions using current densities in the range from 0.06μA/cm² to 15μA/cm², and the disorder monitored by measuring the energy spectra of backscattered protons which were incident on the sample at 450 keV parallel to a (110) axis. Significant differences in the dependence of the disorder on ¹¹B flux and fluence were observed between the implantations performed at room temperature and those carried out at the two lower temperatures.     

Color centers in irradiated MgF2

Abstract

Color centers in rutile-structured MgF₂ single crystals irradiated at 20K/360K by reactor neutrons are investigated spectroscopically at LNT. Four different types of the F-F vacancy bond in MgF₂ are possibly identified to the observed absorption bands as due to the F₂ centers; instead of previous assignments, the 300nm band to the F₂(D_2h), the 325nm band to the F₂(C₁), the 355nm band to the F₂(C_2v), and the 400nm band to the F₂(C_2h) centers.     

基于残差加权经验过程方法的自回归模型分布变点监测

Change monitoring of distribution in time series models is an important issue.This paper proposes a procedure for monitoring changes in the error distribution of autoregressive time series,which is based on a weighed empirical process of residuals with weights equal to the regressors.The asymptotic properties of our monitoring statistic are derived under the null hypothesis of no change in distribution.The finite sample properties are investigated by a simulation.As it turns out,the procedure is not only able to detect distributional changes but also changes in the regression coefficient and mean.Finally,we apply the statistic to a groups of financial data.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

Transiting the molecular potential energy surface along low energy pathways: The TRREAT algorithm

The Transition Rapidly exploring Random Eigenvector Assisted Tree (TRREAT) algorithm is introduced to perform searches along low curvature pathways on a potential energy surface (PES). The method combines local curvature information about the PES with an iterative Rapidly exploring Random Tree algorithm (LaValle, Computer Science Department, Iowa State University, 1998, TR98–11) that quickly searches high‐dimensional spaces for feasible pathways between local minima. Herein, the method is applied to identifying conformational changes of molecular systems using Cartesian coordinates while avoiding a priori definition of collective variables. We analyze the pathway identification problem for alanine dipeptide, cyclohexane and glycine using nonreactive and reactive forcefields. We show how TRREAT‐identified pathways can be used as valuable input guesses for double‐ended methods such as the Nudged Elastic Band when ascertaining transition state energies. This method can be utilized to improve/extend the reaction databases that lie at the core of automatic chemical reaction mechanism generator software currently developed to build kinetic models of chemical reactions. © 2013 Wiley Periodicals, Inc.     

Structure of tecophilin,a tri-caffeoylanthocyanin from the blue petals of Tecophilaea cyanocrocus, and the mechanism of blue color development

The pigment, tecophilin, in blue flowers of Tecophilaea cyanocrocus was isolated and the structure was determined to be 3-O-(6-O-α-l-rhamnopyranosyl-β-d-glucopyranosyl)-7-O-(6-O-(4-O-(2-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-6-O-(4-O-β-d-glucopyranosyl-(E)-caffeoyl)-β-d-glucopyranosyl)-(E)-caffeoyl)-β-d-glucopyranosyl)delphinidin. The reproduction experiment of the same color as petals according to the results of chemical analysis and measurement of vacuolar pH of blue cells clarified that the blue color solely develops by tecophilin without interaction of metal ions nor co-pigments. ¹H NMR analysis and CD spectrum indicate the co-existence of clockwise intermolecular self-association of the delphinidin nuclei and intramolecular π–π stacking between the chromophore and caffeoyl residues to derive bathochromic shift of the absorption spectrum and stabilize the color by preventing hydration reaction.     

You cannot fight the pressure: Structural rearrangements of active pharmaceutical ingredients under magic angle spinning

Although solid-state nuclear magnetic resonance (NMR) is a versatile analytical tool to study polymorphs and phase transitions of pharmaceutical molecules and products, this work summarizes examples of spontaneous and unexpected (and unwanted) structural rearrangements and phase transitions (amorphous-to-crystalline and crystalline-to-crystalline) under magic angle spinning (MAS) conditions, some of them clearly being due to the pressure experienced by the samples. It is widely known that such changes can often be detected by X-ray powder diffraction (XRPD); here, the capability of solid-state NMR experiments with a special focus on ¹H-¹³C frequency-switched Lee–Goldburg heteronuclear correlation (FSLG HETCOR)/MAS NMR experiments to detect even subtle changes on a molecular level not observable by conventional 1D NMR experiments or XRPD is presented. Furthermore, it is shown that a polymorphic impurity combined with MAS can induce a crystalline-to-crystalline phase transition. This showcases that solid-state NMR is not always noninvasive and such changes upon MAS should be considered in particular when compounds are studied over longer time spans.     

The Influence of Different Pretreatment Methods on Color and Pigment Change in Beetroot Products

Vegetable processing pomace contains valuable substances such as natural colors that can be reused as functional ingredients. Due to a large amount of water, they are an unstable material. The aim of our research was to assess how the pretreatment method (thermal or nonthermal) affects the properties of powders obtained from beet juice and pomace after the freeze-drying process. The raw material was steamed or sonicated for 10 or 15 min, and then squeezed into juice and pomace. Both squeezed products were freeze-dried. The content of dry substance; L*, a*, and b* color parameters; and the content of betalain pigments were analyzed. Pretreatments increased the proportion of red and yellow in the juices. Steam and ultrasound caused a significant reduction in parameter b* in the dried pomace. A significant increase in betanin in lyophilizates was observed after pretreatment with ultrasound and steam for 15 min. As a result of all experiments, dried juices and pomaces can also be used as a colorant source. However, there is higher potential with pomaces due to their additional internal substances as well as better storage properties. After a few hours, juice was sticky and not ready to use.     

Heavy Metals in Acrylic Color Paints Intended for the School Children Use: A Potential Threat to the Children of Early Age

Heavy metals are the harmful elements, regarded as carcinogens. Nevertheless, owing to their physical and chemical properties, they are still used in the production of several commercial products. Utilization of such products increases the chance for the exposure of heavy metals, some of them are categorized as probable human carcinogens (Group 1) by the International Agency for Research on Cancer. Exposure of heavy metals to school children at early age can result severe life time health issues and high chance of emerging cancer. Thus, we have performed study relating to the presence of heavy metals in acrylic color paints commonly used by the school children. Acrylic paints of different colors were assayed for seven potential heavy metals manganese (Mn), cobalt (Co), nickel (Ni), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) using microwave digestion and iCAPQ inductively coupled plasma mass spectrometry (ICP-MS) system. The optimized method including paints digestion reagents nitric acid (HNO₃, 65%, 5 mL) and hydrofluoric acid (HF, 40%, 2 mL) have offered excellent method performance with recovery values ranged between 99.33% and 105.67%. The elements were identified in all of the analyzed samples with concentrations ranged from 0.05 to 372.59 µg/g. Cd constitutes the lower percentage (0.05%), whereas Zn constitutes high ratio contribution which was tremendously high (68.33%). Besides, the paints contamination was also color specific, with considerably total heavy metal concentrations found in brunt umber (526.57 µg/g) while scarlet color (12.62 µg/g) contained lower amounts. The outcomes of our investigation highlight the necessity for guidelines addressing the heavy metals in acrylic color paints intended for the school children usage.