In‐Situ Polymerization at the Interface of Micelles: A Novel Method to Control Functionality and Morphology

A new method to control the morphology and functionality of micelles is reported. Triblock copolymer micelles with atom transfer radical polymerization initiators at the interface are prepared in aqueous solution. After in‐situ polymerization at the interface, the structures of the interface and corona change, and micelles with PDMAEMA‐PEG comb–coil coronal chains are obtained. In aqueous solution, the pH exerts an influence on the morphology of the micelles. The coronal chains adopt different conformations at different pH values. Upon drying, the two coronal chains phase separate and form nanometer‐sized domains.

     

23 Na磁共振成像的初步实验研究

介绍了用于²³Na磁共振成像实验的收发一体表面线圈的设计、制作原理与实际制作. 用制作的²³Na表面线圈在Bruker Biospec 47/30磁共振成像仪上采集了不同浓度NaCl溶液,盐腌制鹌鹑蛋和大鼠头部的²³Na密度像,为深入开展23Na磁共振成像的生物医学应用研究奠定基础.     

基于柔性铰链支撑的动镜扫描系统

为了改进傅里叶变换红外光谱仪的动镜驱动装置,设计了一种基于柔性铰链支撑的动镜扫描系统。采用柔性铰链的支撑方式和音圈电机的驱动方式,利用具有高精度高稳定性的直角型柔性铰链支撑机构支撑动镜,利用音圈电机驱动动镜前后往复运动,采用DSP控制系统对动镜的匀速进行控制。实验结果表明所设计的动镜扫描系统具有方向稳定性、速度稳定性、抗震性能优越等优点。     

旋转测磁仪性能的分析

分析了旋转测磁仪性能和它的参数及加工精度的关系.     

Noise-resilient multi-frequency surface sensor for nuclear quadrupole resonance

A planar nuclear quadrupole resonance (NQR) sensor has been developed. The sensor is resilient to environmental noise and is capable of simultaneous independent multi-frequency operation. The device was constructed as an open multimodal birdcage structure, in which the higher modes, generally not used in magnetic resonance, are utilized for NQR detection. These modes have smooth distributions of the amplitudes of the corresponding radiofrequency magnetic fields everywhere along the sensor’s surface. The phases of the fields, on the other hand, are cyclically shifted across the sensor’s surface. Noise signals coming from distant sources, therefore, induce equal-magnitude cyclically phase-shifted currents in different parts of the sensor. When such cyclically phase-shifted currents arrive at the mode connection point, they destructively interfere with each other and are cancelled out. NQR signals of polycrystalline or disordered substances, however, are efficiently detected by these modes because they are insensitive to the phases of the excitation/detection. No blind spots exist along the sensor’s surface. The sensor can be used for simultaneous detection of one or more substances in locations with environmental noise.     

风机盘管设计与仿真软件开发及实验验证

介绍了风机盘管设计与仿真软件,通过合理的计算逻辑,实现风机盘管的设计和性能分析。在设计模块中不仅可以按照最常见的设计条件进行产品开发,而且提出了另外两种设计形式。仿真模块中,可以进行单点和多点的变工况变结构性能分析,自动绘制曲线。并通过实验数据与仿真结果数据的比较,结果吻合较好,且变化趋势一致。软件大大提高了设计效率,并为盘管的性能优化提供预测。     

一种用于开放式MRI的射频发射线圈设计

介绍了一种用于开放式MRI系统的射频发射线圈. 此发射线圈为上下2个相同的线圈,分别安装在磁体的2极,两线圈采用非对称的正交方式放置. 线圈为矩形螺线管结构,通过电磁场数值计算的方法对线圈的匝间距进行了优化,使线圈在300 mm的球形区域内达到偏差不超过3 dB的均匀性要求. 根据优化结果制作了一套用于0.23 T开放式MRI系统的发射线圈,并对线圈的均匀性及射频发射的效率进行了测试. 测试结果表明,线圈具有较高的发射效率和较好的均匀性,由此验证了设计方案的可行性.     

Investigation of Bi-2223 high temperature superconducting tape as the material for gradient coil in MRI

The use of Bi-2223 high temperature superconducting (HTS) tape as a material for gradient coils in MRI is evaluated in this paper. Bi-2223 tapes have a very high critical current and a very low power loss. A HTS tape gradient coil is expected to provide much higher gradient strength and generate much lower heating than a copper coil. Measurements of the AC power loss of Bi-2223 tapes at typical operating frequencies for gradient coils are presented. The degradation of the critical current and its effect on the increase of AC power loss is analyzed. Practical technical issues such as resistance, gradient strength and mechanical performance are also discussed. A prototype Bi-2223 HTS tape gradient coil is evaluated to verify the concept.     

Study of multipacting effect in sub-harmonic buncher of SSRF linac

During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. However, unexpected multipacting effect prevents the increase of the input power when the magnetic field of focusing coils is added after adequate conditioning and a novel method is adopted to suppress it by introducing extra coils to counteract the field. This paper focuses on the simulation of multipacting effect in different magnetic field configurations. The experimental observations and simulation results of multipacting effect are presented and details of the multipacting process are also analyzed.