Efficiency Enhancement of Coaxial-Cavity Electron Cyclotron Resonance Maser by Tapering Guide Magnetic Field

A coaxial-cavity cyclotron resonance maser (CRM) oscillator with tapered guide magnetic field is proposed. It is shown that the transmission quality can be improved by tapering the guide magnetic field. Simulation indicates that the efficiency of a millimeter-wave gyrotron oscillator may be reached up to 38.7% by optimizing the tapered magnetic field.     

激光标线的原理和实验

根据几何光学知识分析了激光标线原理.理论和实验表明:激光标线长度与激光光束形状、光学元件形状及材料折射率有关.并讨论了激光标线向两侧扩展的原因.     

DIELECTRIC EFFECT ON THE RADIO-FREQUENCY CHARACTERISTICS OF A RECTANGULAR WAVEGUIDE GRATING TRAVELING WAVE TUBE

A new type of partial-dielectric-loaded rectangular waveguide grating slow-wave structure (SWS) for millimeter wave traveling wave tube (TWT) is presented in this paper. The radio-frequency characteristics including the dispersion properties, the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analyzed. The results show that the dispersion of the rectangular waveguide grating circuit is weakened, the phase velocity is reduced and the position of the maximum E _z is basically invariant after partially filling the dielectric materials in the rectangular waveguide grating SWS. Although the coupling impedance decreases a little, it still keeps above 40 Ω.     

Tight-binding method modelling of photonic crystal waveguides

We present here a tight-binding-like modelling of two-dimensional (2D) photonic crystals (PCs). Adopted from solid-state physics, the concept of generalized Wannier functions is used to construct a localized state basis that allows a parameter-free ab initio study of defects in PCs. We demonstrate here for a 2D triangular lattice of dielectric rods in air, the existence of this localized basis and the possibility to study large scale complex dielectric structures deviating from periodicity. Specific numerical simulations on a split waveguide embedded in this triangular lattice are performed, and they demonstrate the superiority of this method over plane wave based techniques.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

分辨率为1pm的波长监测新方法

在亚毫米尺度金属包覆波导研究基础上，提出了一种波长监测的新方法.实验采用自由空间耦合技术，激发了波导中对波长变化十分灵敏的超高阶导模，并以此为探针，实现了1pm波长漂移的监测. 关键词： 波长监测 金属包覆波导 超高阶导模     

输入输出共轴的三弯曲型TM01-TE11模式转换器

 通过采用相位重匹配技术，设计了一种输入输出共轴的三弯曲型TM₀₁-TE₁₁模式转换器，该转换器由三段常曲率弯曲波导和两段直波导组成。用模式耦合理论建立了该类模式转换器的数值计算和优化设计方法，并设计了一个中心频率为7.0 GHz的模式转换器。该转换器的TM₀₁-TE₁₁转换效率在中心频率上大于99％，在6.5~7.5 GHz的频率范围内大于90％。应用时域有限差分法和有限元方法对所设计的模式转换器进行了仿真，仿真结果验证了设计理论和设计结果。     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

沿非线性界面传输的TM波传播常数的解析解

本文得到了沿一线性介质与非线性介质界面传输的ＴＭ波精确的色散关系和传播常数的解析计算公式，导出了计算非线性介质中传输功率流的积分公式。本文方法计算传播常数及功率流的优点是可不必先知道电场分布。