石墨炉原子吸收法中热解涂层石墨管在无标准分析法测定环境样品中铬的应用

本文探讨了热解涂层石墨管测定铬的最佳实验条件,研究了各种酸和干扰物质的基体效应,提出用浓氨水为基体改进剂克服高氯酸的干扰。比较了各原子化温度时的理论和实验特征量。使热解涂层石墨管有可能用于无标准分析法测定各种环境样品中的铬。     

IDENTIFICATION OF LANOSTANES AND THEIR POSSIBLY GEOCHEMICAL SIGNIFICANCE IN BIYANG DEPRESSION

In the study, a series of C_(30)-C_(32) lanostane homologs have been identified from Eogene source rocks and crude oils of Biyang depression in Henan Province, China. Based upon the geochemical investigations and simulating experiments, the idea that the generation of lanostane may mainly be related to the specific original organic inputs and low maturity has been proposed.     

锂辉石—石灰石烧结中煤粉代替重油作燃料的研究和实践

目前世界锂工业原料以锂辉石为主。我国锂辉石储量居世界首位，主要分布于新疆、四川、湖南等地，其中又以四川的储量占全国第一。锂的主要基础化合物ＬｉＯＨＨ２Ｏ系用锂辉石－石灰石烧结法而得，烧结燃料是影响ＬｉＯＨＨ２Ｏ产品价格的重要因素之一。过去国内外均采用...     

电感耦合等离子发射光谱法测定渣油中铁、镍、钙、镁、钠、钒金属元素

用电感耦合等离子发射光谱法（ICP-AES）测定渣油中金属元素铁、镍、钙、镁、钠、钒，考察了不同的酸浓度对分析结果的影响和共存元素间的相互干扰，进行了加标回收率和精密度试验。     

不同类型聚合物溶液对采油残余油的作用机理研究

通过实验测定了HPAM溶液和黄原胶溶液的流变性、在多孔介质中的流变性和残余阻力系数 ,计算了衰竭层效应 .用不同的浓度和注入速度进行了驱油实验 .提出聚合物分子缠结作用的增强不仅引起表观粘度增加或衰竭层厚度降低 ,而且使平行于油水界面的拉动残余油的力增加 ,从而使残余油饱和度降低 ,采收率提高 .随浓度增加 ,HPAM溶液的表观粘度和残余阻力系数增加 ,衰竭层厚度减小 ;黄原胶溶液的浓度高于缠结浓度时 ,衰竭层厚度和表观粘度变化不大 .注入速度增加时 ,两种聚合物溶液的衰竭层厚度均降低 ,HPAM溶液的残余阻力系数不变 ,粘弹性增加 ;而黄原胶溶液的残余阻力系数下降 .不同浓度和注入速度情况下两种聚合物溶液的驱油结果证实了文中提出的聚合物分子缠结作用和衰竭层效应对残余油的作用机理 .分子结构的不同是造成两种聚合物溶液在多孔介质中渗流规律和对残余油作用机理的差别的根本原因 .     

原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。     

Plasmid DNA isolation using amino-silica coated magnetic nanoparticles (ASMNPs)

A simple and efficient approach for the rapid isolation of plasmid DNA from crude cell lysates has been described. The approach took advantage of the amino-modified silica coated magnetic nanoparticles (ASMNPs) with positive zeta potential at neutral pH and superparamagnetism under the external magnetic fields. As a demonstration, the pEGFP-N3 plasmid has been concentrated and isolated from the E. coli DH5α transformed with pEGFP-N3 plasmid through electrostatic binding between the positive charge of the amino group of ASMNPs and the negative charge of the phosphate groups of the plasmid DNA. Then the pEGFP-N3 plasmid has been released easily and quickly from the pEGFP-N3 plasmid-ASMNPs complexes with 3 M NaCl. The entire procedure could be carried out by the aid of external magnetic fields in 15 min and eliminate the need of phenol, cesium chloride gradients or other noxious reagents and complexes operation. Moreover, the pEGFP-N3 plasmid obtained by this approach retains biological activity that can be suitable for restriction enzyme digestion and cells transfection with expression of green fluorescence protein.     

Fluorescence spectroscopy for monitoring deterioration of extra virgin olive oil during heating

The potential of fluorescence spectroscopy for characterizing the deterioration of extra virgin olive oil (EVOO) during heating was investigated. Two commercial EVOO were analysed by HPLC to determine changes in EVOO vitamin E and polyphenols as a result of heating at 170°C for 3 h. This thermal oxidation of EVOO caused an exponential decrease in hydroxytyrosol and vitamin E (R²=0.90 and 0.93, respectively) whereas the tyrosol content was relatively stable. At the same time, amounts of preformed hydroperoxides (ROOH), analysed by an indirect colorimetric method, decreased exponentially during the heating process (R²=0.94), as a result of their degradation into secondary peroxidation products. Fluorescence excitation spectra with emission at 330 and 450 nm were recorded to monitor polyphenols and vitamin E evolution and ROOH degradation, respectively. Partial least-squares calibration models were built to predict these indicators of EVOO quality from oil fluorescence spectra. A global approach was then proposed to monitor the heat charge from the overall fluorescence fingerprint. Different data pretreatment methods were tested. This study indicates that fluorescence spectroscopy is a promising, rapid, and cost-effective approach for evaluating the quality of heat-treated EVOO, and is an alternative to time-consuming conventional analyses. In future work, calibration models will be developed using a wide range of EVOO samples.     

Characterization of Lippia sidoides oil extract-b-cyclodextrin complexes using combined thermoanalytical techniques

Thermoanalytical techniques, being rapid and un-expensive have been used for the investigation of the cyclodextrin inclusion complexes for three decades. The conventional thermoanalytical techniques (TG and DTA/DSC) follow the thermal properties of the uncomplexed compounds. Consequently, the inclusion complex formation as well as the liberation of the entrapped guest cannot be followed. Monitoring the products of the thermal fragmentation of parent cyclodextrin and the included molecule(s), applying TG-MS combined technique provides evidence concerning the inclusion complex formation, and besides, gives selective signal to follow the decomposition of the cyclodextrin inclusion complexes. b-cyclodextrin inclusion complexes of Thymol and Lippia sidoides Cham essential oil extract have been prepared and investigated using conventional and combined (TG-MS) thermoanalytical techniques. The evolved gas analysis proved the inclusion complex formation between the host and guests. By the evaluation of the experimental results the elaboration of the entrapped guests from the cyclodextrin cavity could be followed. This revised version was published online in July 2006 with corrections to the Cover Date.     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.