Magnetomechanical training of single crystalline Ni-Mn-Ga alloy

A 5M Ni-Mn-Ga single crystal was investigated, supplied by Adaptamat Ltd, Finland. Especially low temperature magnetic actuation as well as cyclic tensile-compression tests revealed promising properties, which provide useful insights for training concepts in polycrystalline materials. Successive compressions lead to a significant reduction of the twinning stress by a factor of two.     

Actuation design for high‐performance shape memory polyurethanes

A series of shape memory polyurethanes were synthesized from poly(tetramethylene glycol), 4,4‐methylene diphenyl diisocyanate, and 1,3‐butanediol. The prepolymers with different molecular weights (M_c) were capped with 2‐hydroxyl ethylacrylate or 3‐aminopropyltriethoxysilane (APTES) and crosslinked by UV curing or a sol–gel reaction. Variations of the crosslinker functionality (f), subchain density (N), and hard segment content (HSC) produced systematic variations of the glass transition temperature (6–45 °C), accompanied by changes in the mechanical, dynamic mechanical and shape memory properties. More than 95% of shape fixity and 98% of shape recovery up to the fourth cycles were obtained with APTES crosslinked 3000M_c with 30% of HSC. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1473–1479     

Synthesis and Characterization of Novel Liquid Crystalline Epoxides with Lateral Substituent Showing Imposing Shape Memory Properties

In this work, a series of novel shape memory liquid crystalline (LC) epoxides with lateral substituent were prepared and characterized. Dynamic mechanical analysis (DMA) and shape memory testing were used to investigate on the thermo-mechanical properties and shape memory effects of prepared samples. The results showed that the modulus in the rubbery region (E_R ) decreased as the length of lateral alkyl group increases. And more than 95% of the deformation can be fixed as the sample was cooled down below the glass transition temperature (T_g), which was determined by differential scanning calorimetry (DSC) measurement, and can be recovered completely as heating. Effects of the curing agent and substituent on the shape memory behavior were also studied. We found that LC epoxides cured by aromatic diamine have a higher recovery speed. The recovering speeds of the shape memory decreased as the length of lateral alkyl group inscreased. The local ordered structures and the lateral substituent played an important role in shape memory effects.     

Development and assessment of an intrusive polynomial chaos expansion-based continuous adjoint method for shape optimization under uncertainties

This article contributes to the development of methods for shape optimization under uncertainties, associated with the flow conditions, based on intrusive Polynomial Chaos Expansion (iPCE) and continuous adjoint. The iPCE to the Navier–Stokes equations for laminar flows of incompressible fluids is developed to compute statistical moments of the Quantity of Interest which are, then, compared with those obtained through the Monte Carlo method. The optimization is carried out using a continuous adjoint-enabled, gradient-based loop. Two different formulations for the continuous adjoint to the iPCE PDEs are derived, programmed, and verified. Intrusive PCE methods for the computation of the statistical moments require mathematical development, derivation of a new system of governing equations and their numerical solution. The development is presented for a chaos order of two and two uncertain variables and can be used as a guide to those willing to extend this development to a different set of uncertain variables or chaos order. The developed method and software, programmed in OpenFOAM, is applied to two optimization problems pertaining to the flow around isolated airfoils with uncertain farfield conditions.     

Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318     

Maintenance of Cartilaginous Gene Expression of Serially Subcultured Chondrocytes on Poly(2‐Methoxyethyl Acrylate) Analogous Polymers

Chondrocytes are important for cartilage tissue engineering. However, dedifferentiation during chondrocyte subculture prevents the application of cartilage tissue engineering. Therefore, prevention of this dedifferentiation is required. Here, the possibility of poly(2‐methoxyethyl acrylate) (PMEA) and its analogous polymers, poly(tetrahydrofurfuryl acrylate) (PTHFA) and poly(2‐(2‐methoxyethoxy) ethyl acrylate‐co‐butyl acrylate) (PMe2A), for chondrocyte subculture without dedifferentiation is examined. Chondrocytes spread on PTHFA and polyethylene terephthalate (PET), whereas their spreading is delayed on PMEA and PMe2A. When primary chondrocytes are subcultured on these polymers, the expression levels of cartilaginous genes are higher on PMEA and PMe2A than on PET and PTHFA. Integrin contribution to the initial cell adhesion is lower on PMEA and PMe2A than on PTHFA and PET. This low level of integrin contribution to cell adhesion may cause a delay in cell spreading and the maintenance of cartilaginous gene expression. These results indicate that PMEA and PMe2A may be favorable substrates for chondrocyte subculture and cartilage tissue engineering.     

Polymer-Nanoparticle Composites Composed of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Coated Silver Nanoparticles

The effects of addition of synthesized organic-suspension silver nanoparticles on the crystallization and thermal stability of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), UV-Vis absorption spectroscopy, polarized optical microscopy (POM), and thermal gravimetric analysis (TGA). The TEM images showed the average primary size of the as-synthesized silver nanoparticles, coated with a monolayer of the surfactants consisting of oleic acid and an alkylamine, was about 5 nm with narrow distribution, and that they were uniformly dispersed in n-heptane. PHBV/silver nanocomposites were prepared by melt mixing in an internal mixer and then injection molded into rectangle-shaped specimens by a labscale injection molding device. The coated silver nanoparticles showed a homogenuous dispersion in the PHBV matrix when the content of coated silver nanoparticles was about 1%. Both the DSC and POM data showed the efficient heterogeneous nucleation by the coated silver nanoparticles for facilitating PHBV crystallization. The thermal stability of the PHBV/silver nanocomposites improved with the increase in the content of the coated silver nanoparticles.     

THE STUDY OF 2-CHLORO-5,5-DIMETHYL-2-OXO-1,3,2-DIOXAPHOSPHORINANE IN SOLUTIONS BY MOLECULAR DYNAMICS METHODS USING IR AND RAMAN SPECTROSCOPY

Abstract

2-Chloro-5,5-dimethyl-2-oxo-1,3,2-dioxaphosphorinane has been studied in CCl₄, CHCl₃ and CD₃CN solutions by IR and Raman line shape analysis. Equilibrium process of dimerization and ring conversion in CCl₄ solutions have been considered. On the contrary to the commonly expected dominance of the conformer with the equatorial oriented P[dbnd]O bond for 2-halo-2-oxo-1,3,2-dioxaphosphorinanes, it was found that for the 2-chloro derivative both conformers are nearly equally distributed. It has been shown that the interactions induced absorption is an important mechanism of relaxation in the studied compound and this mechanism gives significant contribution to the total IR band broadening, while the interaction induced light scattering is negligible. The obtained results show that the molecular dynamics method can be useful in studying cyclic compounds in solutions.     

Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.