Absolute rate calculations: atom and proton transfers in hydrogen-bonded systems.

We calculate energy barriers of atom- and proton-transfer reactions in hydrogen-bonded complexes in the gas phase. Our calculations do not involve adjustable parameters and are based on bond-dissociation energies, ionization potentials, electron affinities, bond lengths, and vibration frequencies of the reactive bonds. The calculated barriers are in agreement with experimental data and high-level ab initio calculations. We relate the height of the barrier with the molecular properties of the reactants and complexes. The structure of complexes with strong hydrogen bonds approaches that of the transition state, and substantially reduces the barrier height. We calculate the hydrogen-abstraction rates in H-bonded systems using the transition-state theory with the semiclassical correction for tunneling, and show that they are in excellent agreement with the experimental data. H-bonding leads to an increase in tunneling corrections at room temperature.     

Generalized criterion of solvent polarity as a tool for control of chromatographic process

The generalized (reductive) criterion of solvent polarity was obtained by the method of multiparametric optimization of the Snyder index P", Hildebrand parameter _T , permittivity _r , and solvatochromism parameter E _T (30). Possibilities of employing this criterion for estimation of the elution power of normal and reversed mobile phases used in high-performance liquid chromatography were considered.     

煤油共处理油品的族组成研究

采用高效液相色谱法对兖州烟煤与催化裂化油浆共处理制备的油品的族组成进行了研究。结果表明 ,在实验条件下油品主要由烷烃和芳烃组成 ,杂原子化合物含量一般仅为 0 5 %～ 2 0 %。原料煤与油浆比例、反应温度、催化剂对油品族组成具有重要影响 ;随初始氢压不同 ,对油品族组成的影响不同 ;在 4MPa初始压力条件下 ,反应气氛 (氢气、氮气 )对煤油共处理和纯油浆制备油品的族组成影响不大。     

Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres

Incineration methods are becoming increasingly important from the view point of the need to minimize the environmental impact of waste tyre disposal. Combustion of waste tyre, one high ash coal and tyre-coal blends with 10, 30 and 50% waste tyre were investigated by means of thermogravimetric analysis (TGA) carried out at 20 K min⁻¹ in the temperature range from ambient temperature to 1273 K. And effects of the mixed proportion between coal and waste tyre on the combustion process, ignition and burnout characteristics were also studied. The results indicate that the combustion of waste tyre is controlled by the emission of volatile matter, the regions are more complex for waste tyre (three or more peaks) than for coal (one peak). Also as compared with the case of burning only high ash coal, the incorporation of waste tyre can improve the combustion characteristics of high ash coal, especially the ignition performance and the peak weight loss compared with the separate burning of waste tyre and coal. Moreover, comparisons of the TG-DTG profiles between experimental and calculational results, it is indicate that there is a comparatively important difference, the co-combustion characteristics is the coupling effect between waste tyre and coal. The data resulting also showed that the co-combustion of waste tyre and low quanlitied coal as fuel is feasible.     

Interactions of D-Maltose and Sucrose with Some Amino Acids in Aqueous Solutions

Calorimetric titrations have been performed at 298.15 K in aqueous solutions to derive the stability constants and thermodynamic parameters of the interactions of D-maltose and sucrose with some amino acids (glycine, DL-alanine, DL-leucine, and L-serine). The apparent molal volumes of the disaccharides in dilute aqueous solutions of the amino acids have been determined from density measurements at 298.15 K. In contrast to D-maltose, sucrose was found to associate with the amino acids and these associated species are preferentially entropy stabilized. These results are interpreted in terms of the influence of the nature of the solutes, their specific conformations, and hydration, on the ability of the disaccharides to form associated complexes with the amino acids.     

Study of the Behavior of an EC Mechanism Using Cyclic and Derivative Chronopotentiometric Techniques with Spherical Electrodes

The theory for an EC mechanism in chronopotentiometric techniques – reversal chronopotentiometry, cyclic chronopotentiometry and reciprocal derivative chronopotentiometry – is developed. The equations of this article are valid for spherical electrodes of any size and present a compact and easy‐to‐manage form. Methods for determining kinetic parameters of the chemical reaction are proposed and the influence of the electrode radius is discussed. We conclude that large errors in the determination of these parameters are committed if electrode sphericity is neglected. Reciprocal derivative chronopotentiometry has been applied in its traditional form (dt/dE vs. E), and in a more recently proposed modality consisting of plotting dt^1/2/dE vs. E. These techniques are very convenient for studying an EC mechanism since the response is obtained in the form of peaks which are quantitatively related to the kinetic parameters of the chemical reaction. A comparison of the chronopotentiometric methods analyzed leads us to conclude that working curves based on the dt^1/2/dE vs. E curves are more suitable to obtain accurate values of the rate constants of the chemical reaction.     

Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

CFB煤燃烧/热解双反应器中热解室对立管内气固流动特性的影响

考察了循环流化床煤燃烧/热解双反应器系统中热解室的存在对立管内的压力分布及气固流动状况的影响。提升管的内径100 mm、高6 m，立管的内径44 mm、高3 m，热解室的截面积200 mm×200 mm、高770 mm。结果表明，随着提升管内表观气速Ur的增加，有无热解室立管内均为负压差流动，负压差梯度随着Ur的增加而减小。有热解室时，热解室内要保持一定的料位高度，整个立管内固体颗粒的流动为负压差移动床流动；没有热解室时，立管内为稀相流动和移动床流动同时存在，立管内平衡料柱高度随Ur的增加而升高。随着循环量Gs的增加，两种类型的立管内负压差梯度均随之增大，也存在着流动形态的差别。循环量Gs的增加会引起立管内平衡料柱高度的降低。立管内气固相对滑移速度也随着循环量Gs的增加而增大。     

Pyrolysis and TG Analysis of Shivee Ovoo Coal from Mongolia

The coal sample of the Shivee Ovoo deposits has been non-isothermally pyrolysed in a thermogravimetric analyser to determine the influence of temperature, heating rate and purge gas employed on the thermal degradation of the sample. The heating rates investigated in the TG were 10–50 K min^–1 to final temperature of 1000°C. N₂or CO₂ were employed as well as type of purge gas on the process of thermal degradation of the coal sample. The coal was also investigated in a fixed bed reactor to determine the influence of temperature and heating rate of the pyrolysis on the yield of products and composition of the gases evolved. The main gases produced were H₂, CH₄, C₂H₂, C₂H₄, C₂H₆, C₃H₆ and C₃H₈ and also minor concentrations of other gases. This revised version was published online in August 2006 with corrections to the Cover Date.     

Refining adsorption parameters of n-butyl alcohol at the interface of mercury electrode with aqueous NaF and Na2SO4 solutions by correcting the adsorbate concentration

As an adjunct to the regression analysis of differential capacitance curves, which allows refining the adsorption parameters, a program, which takes into account possible errors in volume concentrations of organic substances, is developed. Using this procedure, the earlier data on the differential capacitance of a mercury electrode in aqueous solutions of normal butanol (1-BuOH) containing either 0.1 M NaF or 0.05 and 0.5 M Na₂SO₄ as the supporting electrolyte are analyzed. This allows obtaining the most accurate values of adsorption parameters for the systems mentioned above within the framework of the model of two parallel capacitors and the Frumkin isotherm. It is shown that, when a linear dependence of the intermolecular interaction parameter on the electrode potential is taken into account, the standard deviation of experimental capacitance values from those calculated using the mentioned model is 6.8–8.8%, which points to very high accuracy of this phenomenological model.