Molecular parameters and retention characteristics of unsubstituted polyaromatic hydrocarbons in HPLC

Summary The present research studies the possibility of using the correlation dependence between molecular parameters of unsubstituted polyaromatic hydrocarbons (PAH) and their retention in reversed-phase liquid chromatography to optimize the conditions for the separation and identification of unknown peaks on the chromatograms of multicomponent mixtures. A linear correlation equation, that takes the number and environment of the carbon atom in the PAH molecule into account as well as the differences in the specific interactions of isomeric molecules with polar eluent, has been proposed. The adequacy of the proposed PAH retention model was verified by comparing the calculated retention values with the experimental data. The possibility of identifying unsubstituted PAH according to the number of carbon atoms of various types and according to the values of the molecules lengths (calculated on the basis of the retention of these substances under different eluent compositions) was exemplified by various chromatographic systems (reversed phase-eluent-PAH molecules).     

在Ar气流中热处理KOH-煤焦制大比表面积活性炭

本文将煤焦与ＫＯＨ混合，在Ａｒ气流中进行低温、高温二次热处理，制得了比表面积为２９１８ｍ２／ｇ的活性炭。考查了操作条件对产品性能的影响，同时用Ｘ射线衍射分析研究了煤焦制活性炭过程中的结构变化特征     

Linear free energy relationship of the energy of the CTTS transition of Halide ions with the solvatochromic parameter α

A linear free energy relationship was found betweenv _max, the energy of the absorption maximum of chloride, bromide, or iodide ion in various solvents, and the solvatochromic parameter which is a measure of the hydrogen bond donor ability of the solvent. The relationships are: for chloride,v _max=6.99+50.16 kK; for bromide,v _max=5.52+45.20 kK; for iodide,v _max=5.02+40.33 kK. The correlation ofv _max for iodide ion with gave a larger correlation coefficient and smaller standard deviation than a correlation with the E _T (30) parameter of Dimroth. From the values ofv _max for iodide ion and the solvated electron in liquid ammonia at 25°C, these correlations indicate a preliminary value of 0.00 for the parameter of liquid ammonia. This had not been reported before and is lower than expected from a general knowledge of the physical and chemical properties of liquid ammonia but is consistent with a more detailed consideration and recent gas phase measurements of hydrogen bond donor strength.     

Thermal Degradation of Polychloroprene Rubber Under Isothermal and Non-Isothermal Conditions

The results of a kinetic investigation of the non-isothermal degradation and the isothermal degradation of the residual deformation under constant deflection for polychloroprene rubber are presented. A relationship was derived between the degree of non-isothermal conversion and the value of the investigated mechanical property. This revised version was published online in July 2006 with corrections to the Cover Date.     

聚合温度对聚甲基丙烯酸三丁基锡酯等规度的影响(Ⅰ)

本文测定了0—130℃温度范围内,由~(60)Co-γ射线和两种活性不同的引发剂引发聚合的聚甲基丙烯酸三丁基锡酯的等规度。利用~(13)C-NMR测定聚合物分子链的等规度,如预料的那样,以间同立构为主,并随着聚合温度的升高间同立构等规度降低。作者认为影响聚合物等规度的因素主要是取代基的极性效应。计算出的控制等规度的活化能参数与聚甲基丙烯酸甲酯和聚甲基丙烯酸三甲基锡酯的属同一数量级,可相互比较。     

A study of the thermal decarboxylation of three perfluoropolyether salts

The thermal decarboxylation of three dicarboxylic perfluoropolyether potassium salts of relatively short chain length has been investigated and the products and kinetics of the main reactions have been defined. From the rate constants and Arrhenius parameters data, the second decarboxylation appears to be quantitatively rather close to the first.     

天祝煤MRF工艺热解焦油的组成分析

本文对天祝煤ＭＲＦ（ＭｕｔｉｓｔａｇｅＲｏｔａｒｙＦｕｒｎａｃｅ）热解焦油进行了常规及元素分析，了解其基本特性；用毛细管色谱分别对焦油各馏分进行了分析，共定性定量了１０３种化合物，酚类化合物以低级酚（苯酚、甲酚）为主，中性化合物为多烷基芳烃衍生物、脂肪族链状烷烃和烯烃。上述分析结果为从焦油中提取酚类化工原料或将其加工成各种燃料油的可行性提供了依据。     

Pressure and volume dependence of thelo-to phonons in InAs

The pressure dependence of thelo-to phonons in InAs has been investigated by Raman scattering using the diamond anvil cell. Indium arsenide transforms, presumably to the rock-salt structure at 70±1 kbar. The mode Grüneisen parameters for thelo-to phonons are γ _lo =0.99±0.03, γ _to =1.2±0.03 respectively. The effective charge,e* _T , for InAs decreases slightly with pressure and this trend is in accordance with the behaviour of other III–V zinc blende structured semiconductors: The structural phase transition is discussed in the light of theoretical calculations for phase stability of III–V compounds, as well as recent high pressure x-ray diffraction studies.     

石油焦与煤混合燃料热重分析研究

石油焦与煤混合燃烧是高效处理石油焦的有效方法，作者对选用的石油焦和煤不同配比的混合燃料进行了热重分析研究。使用常压高温热天平研究、分析了各配比混合燃料的热解特性和燃烧特性。并根据化学动力学方法计算了各过程的化学动力学参数，即活化能E和频率因子A0。结果表明，各混合燃料热解起始温度大致相同，随煤焦比减小，挥发分析出速率变缓，最大释放速度所对应的温度升高，最终失重率减小，挥发分释放特性指数减小；随煤焦比增大，混合燃料着火温度和燃尽温度逐渐降低，最大燃烧速率所对应的温度降低，燃烧特性指数增大；随煤焦比减小，活化能和频率因子增大。     

Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.