基于锌(Ⅱ)Schiff碱构筑模块和6-羧基吡啶-2-甲醇的3d-4f异金属四核簇合物的荧光和磁弛豫性质

用溶剂热方法合成了2个新的3d-4f异金属四核簇合物：[Zn₂Ln₂（salen）₂（CO₂PyCH₂O）₂（MeOH）2]（ClO₄）₂·2MeOH（Ln=Dy（1）,Tb（2）;H₂salen=N,N'-双（3-甲氧基水杨基）-1,3-二氨基丙烷;HCO₂PyCH₂OH=6-羧基吡啶-2-甲醇）。它们是由锌（Ⅱ）Schiff碱构筑模块和6-羧基吡啶-2-甲醇辅助配体组装而成的Zn-Ln₂-Zn型簇合物。磁性测量表明稀土离子间存在铁磁性相互作用。Zn₂Dy₂配合物1在2 000 Oe直流磁场下显示出磁弛豫行为;而Zn₂Tb₂配合物2不但有磁场导致的磁弛豫行为,而且还具有荧光性质。     

TiC/C core/shell nanowires arrays as advanced anode of sodium ion batteries

High-perfo rmance anodes of sodium ion batteries(SIBs)largely depends on rational architecture design and binder-free smart hybridization.Herein,we report TiC/C core/shell nanowires arrays prepared by a one-step chemical vapor deposition(CVD)method and apply it as the anode of SIBs for the first time.The conductive TiC core is intimately decorated with carbon shell.The as-obtained TiC/C nanowires are homogeneously grown on the substrate and show core/shell heterostructure and porous architecture with high electronic conductivity and reinforced stability.Owing to these merits,the TiC/C electrode displays good rate performance and outstanding cycling performance with a capacity of 135.3 mAh/g at 0.1 A/g and superior capacity retention of 90.14%after 1000 cycles at 2 A/g.The reported strategy would provide a promising way to construct binder-free arrays electrodes for sodium ion storage.     

全日制化学教育硕士的PCK水平调查研究*

以美国埃里克森学院PCK量化工具为研究基础设计调查问卷,选取离子反应第1课时的电离概念教学片断,以河北某高校学科教学(化学)专业37名教育硕士为研究对象,要求被试者在对视频片断进行观摩的基础上作答9个开放性问题。研究发现:全日制化学教育硕士PCK整体和各维度知识处于“基本的”水平,在教学内容知识维度表现最佳,在学生知识、教学策略知识维度稍差一些,在把握概念关系、调整教学策略等能力活动上的表现有待发展。针对研究发现,结合化学教育硕士的专业属性及培养过程中的问题,提出构建“教师专业学习共同体”,干预化学教育硕士PCK结构的改善;依托教学案例情境载体功能,帮助化学教育硕士进行PCK的深度建构;开展基于研究性反思的教学实践,促进化学教育硕士PCK螺旋式提升等3条建议。     

铝与碱溶液反应的实验研究

铝与氢氧化钠溶液反应一直以来都是教学的难点,从定量角度证明了该反应的氧化剂,并解释了氢氧根离子在反应中的作用。在此基础上,结合实验表现出的铝与不同碱溶液反应的差异,进一步探讨了几种阳离子对铝与碱溶液反应的影响。     

基于水分掺杂的高场非对称波形离子迁移谱检测硫化氢的研究

高场非对称波形离子迁移谱(FAIMS)是一种芯片级高灵敏度快速分析检测技术,其在大气压环境下工作的特点使之受环境影响明显,其中气体的湿度是显著影响因素,湿度的变化可引起迁移区离子反应机理以及迁移过程的变化。该文研究了干燥条件下痕量硫化氢的定量检测方法,确定了DF=33%时的检测线性范围与回归方程。利用PTFE管渗透作用,设定水浴温度为40～90℃,考察了不同含量水分对FAIMS检测硫化氢的影响。通过考察不同湿度下硫化氢的FAIMS特征谱图以及特征离子峰,研究了掺杂水分对于硫化氢谱峰峰值、补偿电压以及检测分辨率的影响。结果表明,FAIMS对于硫化氢的检测谱图清晰可见,能够准确定位其特征离子峰。随着气体中水分增多,不同分离电场下的产物离子峰峰值增大,说明湿度增大在一定程度上提高了灵敏度,DF=35%时的检出限为1.43×10~(-3) mg/m~3。     

一种蒽醌类荧光探针的合成及对氟离子的检测性能

以1,4-二羟基蒽醌为荧光团,叔丁基二甲基氯硅烷为识别基团,设计合成了新型氟离子探针分子1,4-二-(叔丁基-二甲基-硅氧基) 蒽醌(AQTB1),其结构经¹H NMR, ¹³C NMR和MS(ESI)表征。采用FL和UV-Vis详细研究了响应时间、溶液pH值、干扰离子、氟离子浓度对探针AQTB1检测性能的影响。结果表明：探针AQTB1在pH=3~12的缓冲溶液中,实现了对氟离子的高效检测,并不受干扰离子影响。通过FL, IR和MS(ESI)对探针AQTB1检测机理进行研究,结果表明：加入氟离子后,探针分子中的Si-O键断裂,荧光较弱的AQTB1转化为荧光较强的1,4-二羟基蒽醌,实现氟离子的精确定量。实际样品分析实验中,3种不同水样中氟离子的加标回收率为88.0%～109.5%,相对标准偏差(RSD)低于8.5%。     

Recent Advances in Atomic-scale Storage Mechanism Studies of Two-dimensional Nanomaterials for Rechargeable Batteries Beyond Li-ion

Developing new types of rechargeable batteries with high energy densities and low cost have received increasing attentions, aiming to reduce the dependence on high-priced lithium. Beyond Li-ion batteries, the potential alternatives including Na-ion batteries, Li-S batteries and Li-air batteries have been investigated recently, which are required to be viable for commercial applications. From this point of view, to understand the electrochemical reaction mechanisms and kinetics of these batteries has become the key challenge to make breakthroughs in the field of new energy storage. In this review, we present a critical overview of the two dimensional nanomaterials-based batteries (except Li-ion-based batteries) that could meet such demonds. To develop new energy storage devices with more promising performances, the microstructure evolution and atomic scale storage mechanism of these batteries are comprehensively summarized. In addition, the major challenges and opportunities of advanced characterization techniques are finally discussed. We do hope that this review will give the readers a clear and profound understanding of the electrochemical reaction mechanisms and kinetics of the as-discussed batteries, thus effectively contributing to the smart design of future-generation energy storage devices.     

锂离子电池多孔电极理论的回顾与新思考

本文总结了Newman多孔电极理论的基本内容,提出若干改进思路. 提出基于离子-空穴耦合传输机制描述浓电解质中的离子输运过程,在此基础上引入离子-电子耦合转移反应的思想处理电极材料中的离子传输问题,并通过计算嵌锂材料的离子扩散系数验证其合理性. 总结了描述多孔电极多尺度结构的相关理论和技术,表明均质化方法和基于结构重建的介观模拟方法均能给出比较合理的有效输运参数,从而提高多孔电极理论模拟结果的准确性.     

Ni3S2@碳纳米管复合材料的制备及其储钠性能

采用一步固相煅烧工艺制备了碳纳米管原位封装Ni₃S₂纳米颗粒（Ni₃S₂@CNT）,并研究了其作为钠离子电池（SIBs）负极材料的电化学性能. 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、循环伏安测试、恒流充放电以及交流阻抗等研究了Ni₃S₂@CNT的物相结构、形貌特征以及电化学性能. 电化学测试表明,材料在100 mA·g ^-1电流密度下,放电容量可以达到541.6 mAh·g ^-1,甚至在2000 mA·g ^-1的大电流密度下其放电比容量也可以维持在274.5 mAh·g ^-1. 另外,材料在100 mA·g ^-1电流密度下,经过120周充放电循环后其放电和充电比容量仍然可以保持在374.5 mAh·g ^-1和359.3 mAh·g ^-1,说明其具有良好倍率性能和循环稳定性能. 良好的电化学性能归因于这种独特的碳纳米管原位封装Ni₃S₂纳米颗粒结构. 碳纳米管不但可以提高复合材料的导电性,也可以缓冲Ni₃S₂纳米颗粒在反复充放电过程中产生的体积膨胀效应,明显改善了Ni₃S₂@CNT负极复合材料的电化学性能.     

Structure and reactivity of the polarised liquid–liquid interface: what we know and what we do not

Charge transfer phenomena at the interface between two immiscible electrolyte solutions (ITIES) are electrochemical reactions taking place in soft media. Owing to their liquid nature, the ITIES shows a large panel of electrochemical reactions including electron transfer reactions, ion transfer reactions, coupled electron–ion transfer reactions or biomimetic redox reactions. Nevertheless, the mechanisms by which these reactions proceed are yet to be fully understood. The goal of this short review is to summarise the work accomplished over the past decades towards the elucidation of the structure and reactivity at the ITIES, highlighting the main questions still to be answered.