Enthalpy of Adsorption and Isotherms for Adsorption of Naphthenic Acid onto Clays

The enthalpies of adsorption and the isotherms for adsorption of naphthenic acid onto Na-montmorillonite, Na-kaolinite, and Na-illite were studied by means of calorimetry and the static method at 298.15 K. The results show that the enthalpies of adsorption and saturated adsorption amounts of naphthenic acid on different clays change in the order Na-montmorillonite > Na-illite > Na-kaolinite. The interaction between naphthenic acid and clays is discussed.     

W／O／W乳液的渗透溶胀与夹带溶胀

研究了W/O/W乳液的溶胀,实验结果表明,渗透溶胀随内外相溶液间的渗透压差、表面活性剂及载体浓度的增大而增加,但随膜粘度的增加而降低,渗透压差较高时,水渗透的影响大于夹带的影响;膜相中含氧化合物对溶胀的影响大于含氮化合物,采用Span 80作乳化剂时,比采用E 644渗透溶胀约高6倍,夹带溶胀也较高;重复聚结再分散使夹带溶胀急剧增加,因而多级混合澄清槽对液膜操作似不适用。     

消除夹带溶胀的新液膜操作法

消除夹带溶胀的新液膜操作法曹汉瑾，褚莹，何彦涛，吴子生，严忠（东北师范大学化学系长春１３００２４）关键词液膜，油／水乳液，溶胀，夹带，包裹消除液膜操作中的夹带溶胀对液膜的工业化具有重要意义，夹带溶胀分为包裹溶胀和再液化溶胀。前者是乳状液滴上浮时将水相...     

The effect of the exchangeable metallic cation on the colloid properties of laponite treated with acridine orangea spectrophotometric study

The adsorption of the cationic dye acridine orange (AO) by different monoionic laponites leads to changes in the colloid properties of this synthetic mineral in aqueous solutions. The organic cation is adsorbed by the mechanism of cation exchange. Small amounts of adsorbed dye keep the clay in a peptized state with all metallic cations. Greater amounts of AO result in the neutralization of the electric charge of the clay, and its flocculation. In excess AO the charge of the clay platelets becomes positive and the clay is peptized. The colloid properties are studied by absorbance curves in which the absorbance is described as a function of the degree of saturation with constant clay concentrations or with constant dye concentrations. In the absorbance curves three regions can be identified. The transition between the first and second or the second and third regions depend on the exchangeable metallic cation initially present in the clay. The spectrophotometric method is useful in identifying the presence of tactoids and flocculation mechanism, whether it results in card-house or in book-house flocs.     

Degradation of polystyrene using montmorillonite clay catalysts

Summary The performance of acid-treated montmorillonite catalysts in the degradation of polystyrene (PS) was investigated in this study. The degradation was carried out in a semi-batch reactor with a mixture of PS and catalyst at 400-450^oC. The commercial Süd Chemie acid-treated montmorillonite clays (K-series) showed good catalytic activity for the degradation of PS. The styrene monomer and ethylbenzene were major liquid products. The increase of surface acidity enhanced further cracking of styrene dimer and trimer to produce styrene monomer. Higher production of ethylbenzene for K30 may be related to its bigger pore volume and surface area compared to those of K5. High degradation temperature favored styrene monomer production.     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

Synthesis, Characterization and Catalysis of New Pillared Anionic Clays by [GaW_(11)O_(39)M(H_2O)]~(7-)(M=Mn~(2 ),Co~(2 ) or Ni~(2 ))

ＩｎｔｒｏｄｕｃｔｉｏｎＡｎｉｏｎｉｃｃｌａｙｓ（ｌａｙｅｒｅｄｄｏｕｂｌｅｈｙｄｒｏｘｉｄｅｓ）ａｒｅｉｍｐｏｒｔａｎｔｌａｙｅｒｅｄｍａｔｅｒｉａｌｓ．Ｔｈｅｇｅｎｅｒａｌｆｏｒｍｕｌａｉｓ［Ｍ２＋（１－ｘ）Ｍｘ３＋（ＯＨ）２］ｘ＋Ａｎ－ｘ／ｎｍ...     

Thermal behavior of Al-, AlFe- and AlCu-pillared interlayered clays

The purified bentonite parent clay, fraction ≤; 2 mm of montmorillonite type, has been pillared by various polyhydroxy cations, Al, AlFe and AlCu, using conventional pillaring methods. The thermal behavior of PILCs was investigated by combination of X-ray diffraction (XRD), thermal analysis (DTA, TG) and low temperature N2 adsorption/desorption (LTNA). Thermal stability of Al-, AlFe- and AlCu-PILC samples was estimated after isothermal pretreatment in static air on the temperatures 300, 500, 600 and 900°C. Crucial structural changes were not registered up to 600°C, but the fine changes in interlayer surrounding and porous/microporous structure being obvious at lower temperatures, depending on the nature of the second pillaring ion. AlFe-PILC showed higher thermal stability of the texture, the AlCu-PILC having lower values and lower thermal stability concerning both overall texture and micropore surface and volume. Poorer thermal stability of AlCu-PILC sample at higher temperatures was confirmed, the presence of Cu in the system contributing to complete destruction of aluminum silicate structure, by 'extracting' aluminum in stabile spinel form. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal behaviour and slow molecular mobility in two isomers of biphenylmethanol

This research was aimed to investigate the role of clay on the combustion and kinetic behavior of crude oils in limestone matrix. For this purpose, simultaneous TG (thermogravimetry) and DTA (differential thermal analysis) experiments were performed at three different heating rates as 10–15 and 20°C min^–1, respectively. A uniform trend of decreasing activation energies was observed with the addition of clay. It was concluded that clays surface area affects the values of Arrhenius constant, while it is the catalytic properties of clay, which lower the activation energies of all the reactions, involved in the combustion process.