钙钛矿型CaSiO_3解压缩和重压缩过程的分子动力学模拟

用分子动力学模拟方法 (MD)研究了 3 0 0K时钙钛矿型CaSiO3 ,从高压到负压的解压缩过程 .MD模拟获得的P V关系与实验数据相近 ,与已报道的MD模拟数据基本一致 ,所得体积模量也在实验数据分布范围内 .减压缩和重压缩的MD模拟数据与实验结果相似 .钙钛矿型CaSiO3 解压缩成非晶态时 ,存在两个结构破坏阶段 :破坏硅氧八面体和破坏钙氧二十面体 .当钙氧二十面体被破坏后 ,重压缩不能得到钙钛矿型结构 .只要钙氧二十面体未被破坏 ,重压缩可恢复钙钛矿型结构 .本研究得到的结果尚未见相关报道 .由MD模拟数据计算了CaSiO3 系统的红外光谱 ,分析这些数据可知钙钛矿型CaSiO3 解压缩非晶化是一个二阶软模相变 .研究表明钙钛矿型CaSiO3 结构存在一个等容的亚稳极限 ,其解压缩非晶化是一个受动力学控制的亚稳状态 .     

Molecular conformation search by distance matrix perturbations

Three-dimensional molecular structure is fundamental in chemical function identification and computer-aided drug design. The enumeration of a small number of feasible conformations provides a rigorous way to determine the optimal or a few acceptable conformations. Our contribution concerns a heuristic enhancement of a method based on distance geometry, typically in relation with experiments of the NMR type. Distance geometry has been approached by different viewpoints; ours is expected to help in several subtasks arising in the process that determines 3D structure from distance information. More precisely, the input to our algorithm consists of a set of approximate distances of varying precision; some are specified by the covalent structure and others by Nuclear Magnetic Resonance (NMR) experiments (or X-ray crystallography which, however, requires crystallization). The output is a valid tertiary structure in a specified neighborhood of the input. Our approach should help in detecting outliers of the NMR experiments, and handles inputs with partial information. Moreover, our technique is able to bound the number of degrees of freedom of the conformation manifold. We have used numerical linear algebra algorithms for reasons of speed, and because they are well-implemented, fully documented and widely available. Our main tools include, besides distance matrices, structure-preserving matrix perturbations for minimizing singular values. Our MATLAB (or SCILAB) implementation is described and illustrated.AMS subject Classification: 92E10 Molecular structure, 92C40 Biochemistry, molecular biology, 65F15 Eigenvalues, eigenvectors, 15A18 Eigenvalues, singular values, and eigenvectors     

对MDTA中测样品热容量的准恒温法的评述

对用调制差热分析（ＭＤＴＡ）准恒温法测样品热容量的情形进行了讨论。通过结合最基本的热传导定律和ＭＤＴＡ模型，指出了目前国际上测量样品热容量的准恒温法只能得到在所测温度范围内的物质热容量平均值，调制温度的幅度越大或调制频率越高，所得到的热容量数据越平滑。在所测温度范围内样品热容量基本不变时，用ＭＤＴＡ准恒温法较好；但当样品热容量在所测温度范围内有明显变化时，用传统差热分析法（ＤＴＡ）更好一些。     

丙酮中除虫脲溶液标准物质研制

采用重量-容量法制备丙酮中除虫脲溶液标准物质。准确称量国家二级标准物质除虫脲溶解到色谱纯丙酮中,通过A级容量瓶定容至500 mL,摇匀后分装到2 mL安瓿瓶内共460瓶,每瓶为1 mL,保持低温迅速封口,配制过程中室温保持在(20±2)℃。采用液相色谱法进行均匀性、稳定性检验和定值结果验证。从样品中随机抽取16瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内该标准物质均匀性良好;采用t检验对标准物质稳定性进行检验,标准物质在12月内稳定性良好。对该标准物质的不确定度进行了评定,研制的丙酮中除虫脲溶液标准物质定值结果为100μg/mL,相对扩展不确定度为2%(k=2)。结果表明,该标准物质均匀性与稳定性良好,量值准确,可用于日常分析检测中的方法评价和仪器校准。     

Exponential distributions on semigroups

Three fundamental characterizations of the standard exponential distribution on [0, ) are the remaining life, memoryless and constant failure properties. Analogs of these properties are studied for distributions on a class of semigroups in which the semigroup operation replaces addition, a compatible partial order replaces the ordinary order, and a left-invariant measure replaces Lebesgue measure. Partial characterizations of exponential distributions on such semigroups are obtained and the semigroup formulation provides new characterizations of certain aging properties studied in reliability-increasing failure rate, new better than used, and increasing failure rate average.     

Balancing domain decomposition for problems with large jumps in coefficients

The Balancing Domain Decomposition algorithm uses in each iteration solution of local problems on the subdomains coupled with a coarse problem that is used to propagate the error globally and to guarantee that the possibly singular local problems are consistent. The abstract theory introduced recently by the first-named author is used to develop condition number bounds for conforming linear elements in two and three dimensions. The bounds are independent of arbitrary coefficient jumps between subdomains and of the number of subdomains, and grow only as the squared logarithm of the mesh size . Computational experiments for two- and three-dimensional problems confirm the theory.

     

影响白砂糖色值测量结果的原因探讨

研究了水质、滤膜、溶液浓度、糖液ｐＨ值、混浊度的变化与白砂糖色值的关系。研究结果表明，溶液的ｐＨ变化影响最严重。不调整糖液ｐＨ与用ＨＣｌ或ＮａＯＨ调整糖液ｐＨ对比所得白砂糖色值的结果是满意的。标准偏差１１２～１８６，相对标准偏差１１６％～２２５％，调ｐＨ使结果偏高，导致产生系统误差。因此：测定白砂糖色值不宜调整糖液的ｐＨ。     

以Δpe 表示的一次加入标准法计算公式和数值表

本文提出一个以(10~(△pe)-1)~(-1)对△pe表示的离子选择电极一次加入标准法结果处理数值表。该表简单明了,不含电极斜率因素,适用于具有各种斜率的电极和不同价态离子的测定。     

静电和疏水效应对TGEV主蛋白酶二聚体稳定性的影响

从TGEV 3CL蛋白酶二聚体结构出发,研究了TGEV 3CL蛋白酶二聚体单体之间的静电和疏水相互作用.蛋白质的静电相互作用通过有限差分方法求解Poisson-Boltzmann方程得到,疏水相互作用通过分析溶剂可及性表面模型得到.考察了不同pH值对TGEV 3CL蛋白酶二聚体静电和疏水相互作用的影响,在pH值为5.5～8.5时,二聚体静电相互作用能、静电去溶剂化能和疏水自由能都较小,表明在该条件下静电和疏水相互作用有利于二聚体的稳定存在,这符合实验结晶所需条件.pH值对静电去溶剂化能的影响大于疏水自由能,表明静电作用是造成强酸或强碱条件下二聚体不能稳定存在的主要原因.     

The assessment of compliance with legal limits. Part 2. How to consider both type I and type II errors when working in the concentration domain

Considering the uncertainty of measurement when assessing compliance with reference values given in compositional specifications and statutory limits is still a controversial matter. In theory, assessing compliance requires considering both type I (false positive) and type II (false negative) errors. The more the concentration of the analyte in the sample under investigation is close to the allowed concentration limit, the more critical it is to consider both types of errors. This paper describes how this could be done. The matter is discussed in the light of the most recent literature information.