Bismuth Nanoparticles@Porous Silicon Nanostructure,Application as a Selective and Sensitive Electrochemical Sensor for the Determination of Thioridazine

A bismuth@porous silicon (Bi/PSi) nanostructure is fabricated and used as a new highly sensitive electrochemical sensor for measurement of thioridazine. For this purpose, commercial silicon powder is converted to porous silicon using metal‐assisted chemical etching method. Then, bismuth nanoparticles are deposited on the surface of the porous silicon that synthesized in the previous step. The effects of pH and instrumental parameters are studied on the sensor response. After optimization of the parameters, differential pulse voltammetry is used to determine sub‐micro molar amounts of thioridazine. The Linear region of the electrochemical sensor is in the range of 0.1 to 260 μmol L⁻¹ thioridazine with a detection limit of 0.03 μmol L⁻¹, when Bi/PSi/CNTPE is used as an electrochemical sensor. The precision and accuracy of the sensor is evaluated. The Bi/PSi/CNTPE is used as an appropriated tool for accurate measurement of low amounts of thioridazine in real samples with satisfactory results.     

Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy,water resistance,and thermal properties for polyamide 6

The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL‐94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL‐94 V‐0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X‐ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.     

Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates

Crosslinking structures can be partly introduced into PLA by melt mixing in a twin screw extruder with dicumyl peroxide (DCP) and ethoxylated bisphenol A dimethacrylates (Bis‐EMAs) as a crosslinking coagent. The study of DCP and Bis‐EMA contents on the melt rheology, thermal properties, dynamic mechanical properties and morphology of the reactive extruded pellets is presented. The results show that PLA with a DCP content higher than 3 phr exhibits increases in both the melt modulus and complex viscosity as compared with PLA. The introduction of DCP into PLA improved the thermal stability of the PLA. PLAs with various Bis‐EMA contents showed the optimum storage modulus and complex viscosity to occur at 5 phr Bis‐EMAs. Moreover, the glass transition, cold crystallization and melting temperature of PLAs decreased with increasing Bis‐EMA content. The crystallinity of the partly crosslinked PLAs was lower than that of PLA. Similar to the rheological results, the thermo‐mechanical properties showed that the storage modulus and loss modulus of the partly crosslinked PLAs increased with increasing Bis‐EMA contents up to 5 phr. In addition, these partly crosslinked PLAs showed rough surface or sea island‐like structure. Copyright © 2016 John Wiley & Sons, Ltd.     

色谱柱分类数据库用于指导天然药物化学对照品色谱纯度测定时色谱柱理性选择

由于中药化学对照品多数来源于动植物药材,很容易混有结构类似物,故有机杂质测定是可能影响其化学对照品赋值准确性的关键风险因素。中药化学对照品的有机杂质测定通常采用药典收载或文献报道的高效液相色谱法,这些方法通常仅规定“以十八烷基硅烷键合硅胶为填充剂”,无适宜色谱柱的品牌信息,或者实验室无文献所用的色谱柱品牌,而目前市场上已有800多种品牌的C₁₈柱,生产工艺的不同导致不同品牌C₁₈柱的选择性有差异,甚至差异显著。这很容易出现由于色谱柱选择不适宜而导致测定结果不准确的风险。该文采用国外色谱柱分类数据库指导对照品纯度考察时色谱柱的理性选择,尽可能减少色谱柱盲选可能导致的纯度结果不准确的风险。首先,用数据库挑选2根选择性差异显著的色谱柱（选择性因子F≥6）进行平行实验,以尽可能反映采用不同品牌色谱柱可能出现的分离效果差异。如果这2根色谱柱的分离效果及纯度测定结果无显著性差异,则可以交叉验证该对照品纯度测定的准确性。否则需要从数据库中选择另外1根与之前试验中分离效果更好、选择性相似的色谱柱进行纯度结果验证。在N-反式-p-对香豆酰基酪胺和表儿茶素没食子酸酯首批对照品的纯度考察中,使用了上述策略并验证了其有效性和科学性,计划推广应用至更多的中药化学对照品,特别当其可能含碱性或弱酸性化合物时,更应该尝试采用本文推荐的色谱柱选择策略交叉验证其纯度测定结果的准确性。     

超高效液相色谱-大气压化学电离-三重四极杆质谱联用法快速测定食品中苯并[a]芘

建立了快速检测食品中苯并[a]芘的超高效液相色谱-三重四极杆质谱联用(UPLC-MS/MS)分析方法。样品用正己烷提取后,经分子印迹固相萃取柱净化,以甲醇和水作为流动相进行梯度洗脱,在XBridge BEH C18柱上实现分离,大气压化学电离(APCI)-三重四极杆质谱正离子MRM方式检测,以苯并[a]芘-d12作为内标的稳定同位素稀释法定量。方法的线性范围为0.07~50μg/kg,定量限为0.07μg/kg。平均加标回收率为86%~104%,相对标准偏差为2.3%~14%。该方法灵敏、准确,适用于食品中苯并[a]芘的测定,已应用于实际样品的检查。     

铜卟啉合成及其敏化二氧化钛光催化剂的制备——一个大学化学综合性实验

介绍了一个大学化学综合性实验——铜卟啉合成及其敏化二氧化钛光催化剂的制备。该实验是一个科研转化的大学生综合化学实验,内容包括铜四苯基卟啉的合成、铜四苯基卟啉敏化二氧化钛光催化剂的制备,以及光催化剂对水中有机污染物的降解。通过本实验,可以拓宽学生的化学专业知识,提高学生的综合实验操作技能,激发学生对科学研究的兴趣,培养学生的科研探究能力。     

APCI as an innovative ionization mode compared with EI and CI for the analysis of a large range of organophosphate esters using GC‐MS/MS

Organophosphate esters (OPEs) are chemical compounds incorporated into materials as flame‐proof and/or plasticizing agents. In this work, 13 non‐halogenated and 5 halogenated OPEs were studied. Their mass spectra were interpreted and compared in terms of fragmentation patterns and dominant ions via various ionization techniques [electron ionization (EI) and chemical ionization (CI) under vacuum and corona discharge atmospheric pressure chemical ionization (APCI)] on gas chromatography coupled to mass spectrometry (GC‐MS). The novelty of this paper relies on the investigation of APCI technique for the analysis of OPEs via favored protonation mechanism, where the mass spectra were mostly dominated by the quasi‐molecular ion [M + H]⁺. The EI mass spectra were dominated by ions such as [H₄PO₄]⁺, [M–R]⁺, [M–Cl]⁺, and [M–Br]⁺, and for some non‐halogenated aryl OPEs, [M]^+● was also observed. The CI mass spectra in positive mode were dominated by [M + H]⁺ and sometimes by [M–R]⁺, while in negative mode, [M–R]⁻ and more particularly [X]^‐ and [X₂]^‐● were mainly observed for the halogenated OPEs. Both EI and APCI techniques showed promising results for further development of instrumental method operating in selective reaction monitoring mode. Instrumental detection limits by using APCI mode were 2.5 to 25 times lower than using EI mode for the non‐brominated OPEs, while they were determined at 50‐100 times lower by the APCI mode than by the EI mode, for the two brominated OPEs. The method was applied to fish samples, and monitored transitions by using APCI mode showed higher specificity but lower stability compared with EI mode. The sensitivity in terms of signal‐to‐noise ratio varying from one compound to another. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium in the Chemical Synthesis and Modification of Proteins

The field of site‐specific modification of proteins has drawn significant attention in recent years owing to its importance in various research areas such as the development of novel therapeutics and understanding the biochemical and cellular behaviors of proteins. The presence of a large number of reactive functional groups in the protein of interest and in the cellular environment renders modification at a specific site a highly challenging task. With the development of sophisticated chemical methodologies it is now possible to target a specific site of a protein with a desired modification, however, many challenges remain to be solved. In this context, transition metals in particular palladium‐mediated C−C bond‐forming and C−O bond‐cleavage reactions gained great interest owing to the unique catalytic properties of palladium. Palladium chemistry is being explored for protein modifications in vitro, on the cell surface, and within the cell. Very recently, palladium complexes have been applied for the rapid deprotection of several widely utilized cysteine protecting groups as well as in the removal of solubilizing tags to facilitate chemical protein synthesis. This Minireview highlights these advances and how the accumulated knowledge of palladium chemistry for small molecules is being impressively transferred to synthesis and modification of chemical proteins.     

Metal‐Free,Room‐Temperature Oxygen‐Atom Transfer in the N2O/CO Redox Couple as Catalyzed by [Si2Ox].+ (x=2–5)

The thermal reduction of N₂O by CO mediated by the metal‐free cluster cations [Si₂O_x]^.+ (x =2–5) has been examined in the gas phase using Fourier transform ion cyclotron resonance (FT‐ICR) mass spectrometry in conjunction with quantum chemical calculations. Three successive oxidation/reduction steps occur starting from [Si₂O₂]^.+ and N₂O to form eventually [Si₂O₅]^.+; the latter as well as the intermediate oxide cluster ions react sequentially with CO molecules to regenerate [Si₂O₂]^.+. Thus, full catalytic cycles occur at ambient conditions in the gas phase. Mechanistic aspects of these sequential redox processes have been addressed to reveal the electronic origins of these unparalleled reactions.