基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。     

Dynamical measurements on viscoelastic behaviors of spiders in electro-dynamic loudspeakers

Spiders in electro-dynamic loudspeakers are most commonly concentrically corrugated fabric disks, and their viscoelastic behaviors affect the loudspeaker reproductions. A noncontact dynamic measuring technology is presented by a subwoofer closed box to excite the tested spiders pneumatically with a Laser Doppler Vibrometer (LDV) to measure the velocity of the moving spiders. Correlation techniques were employed to get an accurate and reliable acoustical transfer function between the measured velocity and sound pressure. The Young’s moduli of the tested spider composite materials were derived from the measured vibration modes. The creep effect and the level dependent behaviors of tested spiders were investigated. The results indicate that, the Young’s moduli of the tested spiders are frequency dependent. The mechanical stiffness increases with a small slope in low frequency range while a large slope in high frequency range. The loss factor exhibits the maximum around the resonance frequency, and after that it decreases with increasing frequency. The effective stiffness has a monotonic decrease with input voltage levels and the harder the spider, the less stiffness changes with input levels.     

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.     

DF/HF化学激光器HYLTE喷管的副喷管质量流量系数

对DF/HF化学激光器HYLTE喷管的副喷管质量流量进行了数值和理论计算,得出入口滞止压力在0.01~0.4MPa之间、喉道半高度在0.1~0.9mm之间的喷管的氘气,氢气和氦气质量流量系数,总结出质量流量系数随入口滞止压力和喉道高度的变化规律,并给出拟合公式,为副喷管的设计提供依据。     

单层2H-MoTe2光电效应的理论研究

材料的禁带宽度是影响光电探测器探测范围的重要因素.单层2H-MoTe2因具有合适的禁带宽度引起了科研人员广泛的研究兴趣.本文基于非平衡态格林函数-密度泛函理论,采用第一性原理方法,研究了单层2H-MoTe2的光电效应.结果表明:在线性偏振光照射下,MoTe2产生的光电流函数与唯象理论相吻合;在光子能量范围1.6～1.8...     

Hydrophobic effect for anionic dye - cationic surfactant interaction in aqueous and mixed solvent

Abstract

The interaction between anionic dyes [Reactive Orange 122 (R.O 122), Reactive Blue 19 (R.B 19), Reactive Violet 5 (R.V 5) and Acid Green 20 (A.G 20)] with cationic surfactant cetyltrimethylammoniun bromide (CTAB) has been investigated by spectrophotometry and conductance technique. The used dyes are characterized by tautomeric behavior which affects the mechanism of the interaction. Various parameters such as dye structure, surfactant composition, solvent composition, temperature and pH of the medium were studied. The spectral data were applied for calculating the binding constant between dye and surfactant (K_b), fraction of micellization (?_mic), and standard free energy change of binding (ΔG°_b) in 0,10,20 and 30 v/v % acetonitile (AN). Conductance technique was constructed to estimate the ion pairing constant (K_a) at different temperatures and v/v % AN. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) for ion pair formation were evaluated. The role of hydrophobic and electrostatic effect on dye-surfactant interaction was discussed.     

The Determination of Trace Elements by Flame Atomic Absorption Spectrometry: Effect of the Composition of Standard Solution Matrices

Abstract

The effect of using solution matrices in calibration standards different from those employed for the extraction steps in the determination of Cd, Cr, Cu, Ni and Zn were tested. Cu and Zn are little affected by matrix effects but, if the extractant is ammonium acetate, the use of other matrices may result in too high Cd, Cr and Ni values.     

A System for Determination of Precise Isotopic Vapor Pressure Differences from —20 to 110 °C,including Temperature Control to 0·001 over that Range)

An experimental system for the precise measurement of small vapor pressure differences over the range —20 to 110°C is described.     

Effects of laser irradiation on optical properties of a-Se100−x Te x thin films

The effect of laser irradiation on the optical properties of thermally evaporated Se_100?x Te _x (x=8, 12, 16) chalcogenide thin films has been studied. The result shows that the irradiation causes a shift in the optical gap. The results have been analyzed on the basis of laser irradiation-induced defects in the film. The width of the tail of localized state in the band gap has been evaluated using the Urbach edge method. As the irradiation time increases, the values of the optical energy gap for all compositions decrease, while tail energy width increases. It is also observed that the optical energy gap decreases with increasing Te content in the alloy. These changes are a consequence of an increment in disorder produced by laser irradiation in the amorphous structure of thin film.     

Size-dependent ignition temperature of metallic compounds fabricated by self-propagating high-temperature synthesis

Considering the diffusion reaction at solid interfaces, the ignition temperature of compounds fabricated by self-propagating high-temperature synthesis (SHS) is modelled with the help of size-dependent activation energy. As reactant size decreases, ignition temperature also decreases. This is because of increased contact areas between the reactants and the lowered diffusion barrier, both of which must be calculated specifically for reactants in nanoscale. The model predictions and experimental results are consistent for some metallic compounds.