燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

沉积铁钝化膜的傅立叶变换表面增强拉曼光谱

利用恒电流沉积技术、傅立叶变换表面增强拉曼散射技术现场研究了0 1mol/LNaOH溶液中铁金属电极在不同电位下的表面氧化物的组成。结果表明,在电极预钝化区,表面首先生成的Fe(OH)2可由拉曼谱图中出现的550cm-1表征,证实了以往的研究结果。进入钝化区,表面二价氧化物逐步转化为高价氧化物Fe3O4及α 、δ 和γ FeOOH。在电位回扫的过程中,各氧化产物的还原以及铁表面SERS活性的逐渐消失导致谱峰强度降低。     

1H and 13C NMR assignments of abietane diterpenes from Aegiphila lhotzkyana

An NMR study of one new and several known abietane diterpenes isolated from the roots of Aegiphila lhotzkyana is described. In addition to 1D NMR, several 2D shift‐correlated NMR pulse sequences (¹H–¹H‐COSY, NOESY, HMQC and HMBC) were used to establish all the structures, and unambiguously perform the ¹H and ¹³C chemical shift assignments of the new natural diterpene and three derivatives, the NMR data for which have not been reported previously. Revision of current data assignment for teuvincenone H is also suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

A microspectroscopic study of the electronic homogeneity of ordered and disordered Sr2FeMoO6

Disordered Sr₂FeMoO₆ shows a drastic reduction in saturation magnetization compared to highly ordered samples, moreover magnetization as a function of the temperature for different disordered samples shows qualitatively different behaviours. We investigate the origin of such diversity by performing spatially resolved photoemission spectroscopy on various disordered samples. Our results establish that e_xtensive electronic inhomogeneity, arising most probably from an underlying chemical inhomogeneity in disordered samples, is responsible for the observed magnetic inhomogeneity. It is further pointed out that these inhomogeneities are connected with composition fluctuations of the type Sr₂Fe_1+x Mo_1-x O₆ with Fe-rich (x > 0) and Mo-rich (x < 0) regions. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Study of local lattice relaxation of substitutional impurities in silicon and germanium

Local lattice relaxation of substitutional donors in silicon investigated using self‐consistent multiple scattering Xα (MSXα) method within the framework of the standard muffin‐tin potential approximation is extended to substitutional donors in germanium and substitutional acceptors in both silicon and germanium. Incorporating the effect of lattice relaxation surrounding the impurity makes the model suitable for both shallow and deep levels. Chemical trends of some aspects of impurity states, such as local lattice relaxation and charge transfer, of the impurities both in silicon and germanium are inferred. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Towards the synthesis of MAX-phase functional coatings by pulsed laser deposition

Pulsed laser deposition with a Nd:YAG laser was used to grow thin films from a pre-synthesized Ti₃SiC₂ MAX-phase formulated ablation target on oxidized Si(1 0 0) and MgO(1 0 0) substrates. The depositions were carried out in a substrate temperature range from 300 to 900 K, and the pressure in the deposition chamber ranged from vacuum (10⁻⁵ Pa) to 0.05 Pa Argon background pressure. The properties of the films have been investigated by Rutherford backscattering spectrometry for film thickness and stoichiometric composition and X-ray diffraction for the crystallinity of the films. The silicon content of the films varied with the energy density of the laser beam. To suppress especially the silicon re-sputtering from the substrate, the energy of the incoming particles must be below a threshold of 20 eV. Therefore, the energy density of the laser beam must not be too high. At constant deposition energy density the film thickness depends strongly on the background pressure. The X-ray diffraction measurements show patterns that are typical of amorphous films, i.e. no Ti₃SiC₂ related reflections were found. Only a very weak TiC(2 0 0) reflection was seen, indicating the presence of a small amount of crystalline TiC.     

Wavelength dependence in photochemical vapor deposition of aluminum film using dimethylaluminum hydride

In photochemical vapor deposition of aluminum film on silicon using dimethylaluminum hydride, (CH₃)₂AlH, a surface reaction dominated below a (CH₃)₂AlH pressure of 0.3 m Torr at 200°C, which was induced only with the 160 nm band emitted from a deuterium lamp. A gas-phase reaction occurred above 0.3 mTorr at 200°C, which could be induced by both 160 nm and 240 nm emission bands from the lamp. To distinguish between surface ad gas-phase reactions, a thickness profile was used. At 240°C the surface reaction could be induced even by the 240 nm band, while the deposits formed under illumination of the two bands were thinner than those obtained with only the 240 nm band, indicating occurrence of vacuum ultraviolet (VUV)-enhanced desorption. The mechanism responsible for the observed wavelength dependence in unclear. The electrical resistivity of the films deposited at 200°C was 4.5 μΩ cm, which did not change with wavelength.     

光学薄膜在现代汽车工业中的应用

本文论述应用光学薄膜技术对汽车窗口玻璃和塑料的若干性能进行改进的技术发展水平，这些性能包括塑料表面的硬化，红外区的反射，紫外区的吸收，偏振化作用，双折射，憎水性以及光学角度选择性等，评论等离子体处理和物理蒸汽淀积薄膜工艺近来应用的一些例子。对于物理蒸汽淀积薄膜所提供的异常功能连同实际使用中它们的耐久性作了特殊的强调。     

Looking at Fokker-Planck dynamics with a noisy instrument

We consider the class of experiments which can be characterized by a Fokker-PIanck dynamics corresponding to the overdamped motion of a state point in a suitable stochastic potential. We assume that the general form of the potential is known (or can be guessed with reasonable accuracy), but that its parameters are to be determined experimentally by measurements made with a noisy instrument. This possible method for determining the potential parameters, which exploits the system's own internal stochastic motion in order to explore rapidly its available parameter space, is substantially more efficient than traditional methods involving time averages of single point measurements, and yet does not appear to have been previously considered. The method could be important when, for example, the experiment must be completed in a limited time owing either to the expense of the experimental materials or to the temporary stationarity of the preparation, situations which are commonly encountered in experimental biochemistry and biology.     

Deposition of boron nitride on graphite at 1300 K

A method for the deposition of BN onto graphite and other substrates is described. Boron trichloride (BCl₃) and ammonia (NH₃) diluted with Ar were used as reacting gases. The deposition process was carried out at 1300 K as well as lower temperatures in an open system at pressures of 1 atm. The consequences of the introduction of hydrogen to the system were considered. It was demonstrated that the replacement of argon with hydrogen increases the efficiency of the process as well as the theoretical rate of BN deposition. However, the acceleration of the deposition seems to be unprofitable, because the resulting supersaturation leads to the formation of an amorphous phase. The modification of the experimental conditions were proposed.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday