Synthesis of chlorophyll-a derivatives possessing (un)substituted 13-exo-methylene moiety and their optical properties

Chlorophyll-a derivatives possessing an un/mono/disubstituted methylene moiety at the 13¹-position were prepared by (un)substituted methylation of the 13-carbonyl group and successive dehydration. Substitution of the 13¹-oxo to the methylene group slightly blue-shifted electronic absorption and emission bands in a solution and decreased chemical stability to give an oxidation product cleaved at the E-ring. Further mono/disubstitution at the methylene terminal increased wavelengths of absorption and emission maxima as well as oxidative tolerance.     

Valence state parameters of all transition metal atoms in metalloproteins—development of ABEEMσπ fluctuating charge force field

To promote accuracy of the atom‐bond electronegativity equalization method (ABEEMσπ) fluctuating charge polarizable force fields, and extend it to include all transition metal atoms, a new parameter, the reference charge is set up in the expression of the total energy potential function. We select over 700 model molecules most of which model metalloprotein molecules that come from Protein Data Bank. We set reference charges for different apparent valence states of transition metals and calibrate the parameters of reference charges, valence state electronegativities, and valence state hardnesses for ABEEMσπ through linear regression and least square method. These parameters can be used to calculate charge distributions of metalloproteins containing transition metal atoms (Sc‐Zn, Y‐Cd, and Lu‐Hg). Compared the results of ABEEMσπ charge distributions with those obtained by ab initio method, the quite good linear correlations of the two kinds of charge distributions are shown. The reason why the STO‐3G basis set in Mulliken population analysis for the parameter calibration is specially explained in detail. Furthermore, ABEEMσπ method can also quickly and quite accurately calculate dipole moments of molecules. Molecular dynamics optimizations of five metalloproteins as the examples show that their structures obtained by ABEEMσπ fluctuating charge polarizable force field are very close to the structures optimized by the ab initio MP2/6–311G method. This means that the ABEEMσπ/MM can now be applied to molecular dynamics simulations of systems that contain metalloproteins with good accuracy. © 2014 Wiley Periodicals, Inc.     

Study on the Inherent Factors Affecting the Modification Effect of EVA on Waxy Crude Oils and the Mechanism of Pour Point Depression

The Ar-Sai waxy crude oils were taken as the research objects, and the viscosity reduction rates and the condensation point reduction rates were regarded as the evaluation indexes, the impacts of components content of the crude oils and carbon number distribution of waxes on the modification effect of EVA-type pour point depressant (PPD) were analyzed by using gray correlation analysis method. The oil wax was acquired by applying the extraction and separation techniques initially, then the structures and the lattice parameters of wax crystals before and after adding the PPD were studied by polarized light microscopy observation and x-ray diffraction techniques, the mechanism of pour point depression was discussed at last. The results indicate that wax content and the low carbon number wax have significant influences on the modification effect of PPD, while the impact of high carbon number wax is relatively small. Co-crystallization is the main mechanism of pour point depression, nevertheless, the impacts of the asphaltenes, resins, solid particles, and light components of the crude oils on the modification effect of the PPD cannot be ignored.     

Cd2+ Counterion-Assisted Synthesis of Uniform CdS Nanospheres Capped with the Anionic Surfactant Sodium dodecylsulfate

Uniform cadmium sulfide (CdS) nanospheres were successfully prepared in the presence of the anionic surfactant sodium dodecylsulfate (SDS) at an appropriate concentration and relatively low temperature. Zeta potential data were collected for the three kinds of CdS particles to verify the existence of the Cd²⁺counterion on the CdS surface and Charge reversal; this was crucial for the explanation of how the anionic SDS surfactant molecules adsorbed on the negatively charged surface. Moreover, we confirmed that SDS had coated the surface of CdS nanospheres using infrared spectroscopy, and thermogravimetric analysis. An counterion assisted mechanism accounting for synthesis of CdS nanospheres could be widely used in the synthesis of nanomaterials if there is specific adsorption of the counterion. The CdS nanospheres showed good performance for the rapid adsorption of methylene blue.     

神府煤与稻杆共热溶研究

研究了神府煤与稻杆在1-甲基萘溶剂中不同温度下的共热溶行为。相对神府煤,稻杆单独热溶时具有更高的热溶率,表明其具有较好的热溶活性。但稻杆的热溶过程中产生大量的挥发性气体,导致其热溶率和热溶物产率之间的较大差异。神府煤单独热溶时,其热溶率与热溶物产率之间的差异相对较小。神府煤与稻杆的共热溶表明,两者之间存在协同效应,并且该协同效应受温度的影响显著。在热溶温度为320~340 ℃时,对热溶物产率而言具有正的协同效应,也即其热溶物产率的实验值大于通过神府煤与稻杆单独热溶时热溶物产率经质量加权平均计算得到的理论值。在研究的热溶温度范围内,共热溶的热溶率实验值均低于质量加权平均的理论计算值。相对于理论计算值,在320 ℃时热溶物产率的实验值增加达到最大,为7.9%。此外,通过对热溶物的性质表征,还进一步探讨了共热溶过程中的协同作用机理。     

煤热解过程中含氮产物的析出及金属离子的催化特性研究

选择3种典型煤种为研究对象,通过脱灰和添加含Fe、Ca、Na等金属盐,研究煤热解过程中金属离子对含氮气相产物析出特性的影响以及与煤种和温度的交互关联。结果表明,脱灰煤HCN和NH3的产率均比原煤样下降,而随温度的升高HCN的产率逐渐增大,NH3的产率则先增加后减小,在800℃有最大值。金属离子对不同变质程度煤的含氮气相产物析出的催化作用不同;Fe和Na抑制中等变质程度煤HCN的析出,而对低变质程度煤起促进作用,Ca则对HCN的析出均有一定的促进作用。而对于NH3的形成,3种离子均对中等变质程度煤有抑制作用,而对低变质程度的煤则有促进作用。不同金属离子对HCN和NH3析出的催化作用均有一定的范围。煤热解时含氮气相产物的析出是煤中固有多种金属离子共同作用的结果。     

Finite Element Based Micro-mechanical Modeling of Interphase in Filler Reinforced Elastomers

Characteristic properties of elastomers can be tailored by embedding them with filler particles. Along with enhancing the overall properties of the composite, filler particles also induce some inelastic effects. In this paper, a finite element computational model is used to study the effect of microstructure morphology in filled elastomers, on its macroscopic large deformation behavior. A multiphase material model that accounts for the hypothesis of shift in glass transition temperature in the vicinity of the filler particle is developed to simulate the interphase between the fillers and the matrix. It also accounts for the breakdown and re-aggregation of filler networks under cyclic loading. Examples at the microstructural level, demonstrating the dynamics of the interphase using the developed multiphase model have been successfully simulated. The obtained results are in good qualitative agreement with the Mullins effect. Therefore, computational experiments using this methodology enable the prediction of the experimentally observed softening behavior in filled elastomers based on its microstructure evolution.     

Nitrogen-doped graphene as an excellent candidate for selective gas sensing

The toxic gases,such as CO and NO,are highly dangerous to human health and even cause the death of person and animals in a tiny amount.Therefore,it is very necessary to develop the toxic gas sensors that can instantly monitor these gases.In this work,we have used the first-principles calculations to investigate adsorption of gases on defective graphene nanosheets to seek a suitable material for CO sensing.Result indicates that the vancancy graphene can not selectivly sense CO from air,because O2 in air would disturb the sensing signals of graphene for CO,while the nitrogen-doped graphene is an excellent candidate for selectivly sensing CO from air,because only CO can be chemisorbed on the pyridinic-like N-doped graphene accompanying with a large charge transfer,which can serve as a useful electronic signal for CO sensing.Even in the environment with NO,the N-doped graphene can also detect CO selectively.Therefore,the N-doped graphene is an excellent material for selectively sensing CO,which provides useful information for the design and fabrication of the CO sensors.     

Synthesis and Characterization of Aminoporphyrin‐End‐Functionalized Poly(N‐isopropylacrylamide) with Photodynamic and Thermoresponsive Effects

The novel aminoporphyrin‐end‐functionalized poly(N‐isopropylacrylamide) (PNIPAM) polymer H₂N‐TPP‐PNIPAM (TPP=5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin) behaves as a multifunctional platform that displays a photodynamic effect, thermosensitivity, and fluorescence properties. The polymer was designed by using an asymmetrical aminoporphyrin (i.e., H₂N‐TPP‐Cl) as the initiator for the atom‐transfer radical polymerization of N‐isopropylacrylamide (NIPAM). The polydispersity index (PDI) obtained by gel‐permeation chromatography indicated that the molecular‐weight distribution was narrow (1.09<PDI<1.27). The lower critical solution temperatures of H₂N‐TPP‐PNIPAM showed a decreasing trend as the molecular weight was increased as a result of the incorporation of the porphyrin group at the end of the chain. The fluorescence spectra revealed the luminescent properties of the materials. The results of confocal laser scanning microscopy showed that the polymer could enter the cytoplasm through endocytosis. In addition, the multifunctional platform exhibited low toxicity against normal cells (L929) and cancer cells (Hela) and enhanced photodynamic activity towards HeLa cells, without significant necrocytosis towards L929 cells; as a result this material may be useful in the future for practical photodynamic therapy.