设计性、研究性实验对学生创新能力的培养

根据设计性、研究性实验的特点,从几个方面、不同的角度,阐述了设计性、研究性实验对学生创新能力培养的作用与意义。     

Effect of the Parameters of Three-Mirror Resonators on the Spectral Characteristics of Single-Pulse Laser Generation with Self-Injection of Priming Radiation

Based on a semiclassical theory, investigations were made of the dynamics and spectral composition of pulsed generation with self-injection of priming radiation from the active part of a three-mirror linear resonator, the passive part of which contains an active loss modulator and serves as the output reflector of the laser. It is shown that there exists a range of resonator parameters at which pulsed lasing has virtually a single frequency irrespective of the detuning of the frequencies of the priming radiation and of the nearest eigenmode of the composite resonator. Considering graphically the phase conditions of generation, it is established that among pulsed lasers with self-injection of priming radiation which are constructed on the basis of three-mirror linear and branched resonators, the most efficient for creating single-frequency generation are those in which the length of the main resonator, where generation of the pulse occurs, is larger than the length of the additional one intended for forming the priming radiation. With an inverse ratio of the lengths of the resonators, the conditions of single-frequency pulsed generation becomes dependent on the priming radiation frequency.     

Quadrilateral surface meshes without self-intersecting dual cycles for hexahedral mesh generation

Several promising approaches for hexahedral mesh generation work as follows: Given a prescribed quadrilateral surface mesh they first build the combinatorial dual of the hexahedral mesh. This dual mesh is converted into the primal hexahedral mesh, and finally embedded and smoothed into the given domain. Two such approaches, the modified whisker weaving algorithm by Folwell and Mitchell, as well as a method proposed by the author, rely on an iterative elimination of certain dual cycles in the surface mesh. An intuitive interpretation of the latter method is that cycle eliminations correspond to complete sheets of hexahedra in the volume mesh.

Although these methods can be shown to work in principle, the quality of the generated meshes heavily relies on the dual cycle structure of the given surface mesh. In particular, it seems that difficulties in the hexahedral meshing process and poor mesh qualities are often due to self-intersecting dual cycles. Unfortunately, all previous work on quadrilateral surface mesh generation has focused on quality issues of the surface mesh alone but has disregarded its suitability for a high-quality extension to a three-dimensional mesh.

In this paper, we develop a new method to generate quadrilateral surface meshes without self-intersecting dual cycles. This method reuses previous b-matching problem formulations of the quadrilateral mesh refinement problem. The key insight is that the b-matching solution can be decomposed into a collection of simple cycles and paths of multiplicity two, and that these cycles and paths can be consistently embedded into the dual surface mesh.

A second tool uses recursive splitting of components into simpler subcomponents by insertion of internal two-manifolds. We show that such a two-manifold can be meshed with quadrilaterals such that the induced dual cycle structure of each subcomponent is free of self-intersections if the original component satisfies this property. Experiments show that we can achieve hexahedral meshes with a good quality.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

Accelerating Effect in Kerr-Newman-Kasuya Field

We have obtained expressions of the accelerating effect in Kerr-Newman Kasuya field. These expressionsinclude four parameters: mass m, angular momentum a, electric charge q, and magnetic charge φ. Furthermore we studyits special case (vi = 0). We get the following conclusion. In the gravitation field of souse mass with electric charge qand magnetic charge b, the acceleration of test particle has not only radial component but also transverse component.When θ = 0, the acceleration is minimum, and when θ = π/2, the acceleration is maximum. Furthermore, we discussthe effects of electric charge q and magnetic charge φ respectively.     

Fundamental processes in long air gap discharges

The development of atmospheric lightning is initiated and sustained by the formation in virgin air of ‘streamer corona’ and ‘leader’ discharges, very similar to those observed in laboratory long sparks. Therefore, the experimental and theoretical investigations of these laboratory discharges have become of large interest to improve the physical knowledge of the lightning process and to develop self-consistent models that could be applied to new protection concepts.In the present paper the fundamental processes of the subsequent phases of long air gap discharges are analyzed, from the first corona inception and development to the leader channel formation and propagation. For all these processes simulations models are discussed that have been essentially derived and simplified by the authors, in order to develop sequential time-dependent simulation of the laboratory breakdown, with both positive and negative voltages. The possibility of extending these models to the case of natural lightning is discussed in the companion paper, presented in this same volume. To cite this article: I. Gallimberti et al., C. R. Physique 3 (2002) 1335–1359.     

在不同激光脉宽下的高次谐波

用数值计算方法计算了不同强激光脉冲宽度下高次谐波的产生.我们发现对于激光场强度不高,不能有效电离初态的激光场,长脉冲宽度可以更有效产生高次谐波;而对于高场强的激光场,由于它能够在几个光学周期之内把原子的初态全部电离,所以短脉冲的激光场能够更有效产生高次谐波.     

Unified Model for Generation Complex Networks with Utility Preferential Attachment

In this paper, based on the utility preferential attachment, we propose a new unified model to generate different network topologies such as scale-free, small-world and random networks. Moreover, a new network structure named super scale network is found, which has monopoly characteristic in our simulation experiments. Finally, the characteristics ofthis new network are given.     

Pump–probe second harmonic generation study of ultrafast spin dynamics in semiconductor multilayers

We report the first application of pump–probe second harmonic generation (SHG) measurements to characterize optically induced magnetization in non‐magnetic multilayer semiconductors. In the experiment, spin‐polarized electrons are excited selectively by a pump beam in the GaAs layer of GaAs/GaSb/InAs structures. However, the resulting net magnetization manifests itself through the induced SHG probe signal from the GaSb/InAs interface, thus indicating a spin‐polarized electron transport across the heterostructure. We find that the magnetization dynamics are governed by an interplay between the spin density evolution at the interfaces and the spin relaxation. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and characterization of a polyfluorene containing carbazole and oxadiazole dipolar pendent groups and its application to electroluminescent devices

We have synthesized a blue‐light‐emitting polyfluorene (PF) derivative ( PF‐CBZ‐OXD ) that presents bulky hole‐transporting carbazole and electron‐transporting oxadiazole pendent groups functionalized at the C‐9 positions of alternating fluorene units. The results from photoluminescence and electrochemical measurements indicate that both the side chains and the PF main chain retain their own electronic characteristics in the copolymer. An electroluminescent device incorporating this polymer as the emitting layer was turned on at 4.5 V; it exhibited a stable blue emission with a maximum external quantum efficiency of 1.1%. Moreover, we doped PF‐CBZ‐OXD and its analogue PF‐TPA‐OXD with a red‐light‐emitting iridium phosphor for use as components of phosphorescent red‐light emitters to investigate the effect of the host's HOMO energy level on the degree of charge trapping and on the electrophosphorescent efficiency. We found that spectral overlap and individual energy level matching between the host and guest were both crucial features affecting the performance of the electroluminescence devices. Atomic force microscopy measurements indicated that the dipolar nature of PF‐CBZ‐OXD , in contrast to the general nonpolarity of polydialkylfluorenes, provided a stabilizing environment that allowed homogeneous dispersion of the polar iridium triplet dopant. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2925–2937, 2007