脉冲激光引信用PFM和PWM式LD驱动电路的研究

 在激光引信的通讯系统中，针对引信用脉冲式半导体激光器驱动电路的脉冲宽度、频率、功率可调的需要，根据LD驱动电路的工作原理，建立了LD驱动电路的一般模型。然后用电子多频振荡器提供驱动信号，用双MOS驱动器来驱动半导体激光器，通过大量的实验、仿真、分析、比较，设计出了方便可调的大功率LD的驱动电路，该电路的脉冲频率和脉冲宽度可方便调整。并且该驱动电路的频率调节范围大（10Hz~20kHz）；脉冲宽度可以从几ns到几百ns进行调节，大大提高了激光引信通讯系统的性能与可靠性。     

基于开关控制的兴趣实验设计

设计了开关控制实验,专门对常见的开关特点及使用进行探讨,根据开关特点搭建相应的控制电路,用近似于工程项目的形式锻炼学生对开关的灵活应用,激发了学生实验的兴趣和积极性.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

化学模拟在反应堆水化学课程中的应用

高温高压化学反应对反应堆设备的可靠性、反应堆性能的控制、核电站运行的安全持久性等具有重要影响，但相关实验难以在高校教学中开展。借助PHREEQC程序及最新热力学数据，建立了反应堆一回路硼酸-氢氧化锂添加配比、腐蚀沉淀物产生及二回路pH控制方案的化学反应模型。运用化学模拟来教学，促进了学生对所学知识的理解与掌握，丰富了现代教学方法。相关模型对核电企业的培训也具有一定参考价值。     

具有复合幂函数和共存吸引子的新混沌系统的动力学分析与电路仿真

构造一个具有复合幂函数的三维连续自治混沌系统。系统的状态方程仅有5项，其中一项是指数小于1的复合幂函数。该系统具有结构简单、非双曲平衡点、吸引子共存的性质，展现出了复杂的动力学行为。首先，对系统的动力学行为进行分析，包括李雅普诺夫（Lyapunov）指数谱、分岔图以及庞加莱映射等，结果表明此系统具有混沌特性。然后进行混沌系统的电路设计，电路仿真结果验证了理论分析的正确性。     

Characteristic behaviour of plasma fluctuations inside a plasma bubble in presence of a magnetic field due to the formation of a potential well

Experiments were carried out to observe the effect of a magnetic field and grid biasing voltage in presence of a plasma bubble in a magnetized, filamentary discharge plasma system. A spherical mesh grid of 80% optical transparency was negatively biased and introduced into the plasma for creating a plasma bubble. Diagnostics via an electrical Langmuir probe and a hot emissive probe were extensively used for scanning the plasma bubble. Plasma floating potential fluctuations were measured at three different positions of the plasma bubble. The instability in the pattern showed the dynamic transition from periodic to chaotic for increasing magnetic fields. Time scale analysis using continuous wavelet transform was carried out to identify the presence of non‐linearity from the contour plots. The mechanisms of the low‐frequency instabilities along with the transition to chaos could be qualitatively explained. Non‐linear techniques such as fast Fourier transform, phase space plot, and recurrence plot were used to explore the dynamics of the system appearing during plasma fluctuations. In order to demonstrate the observed chaotic phenomena in this study, characteristics of chaos such as the Lyapunov exponent were obtained from experimental time series data. The experimentally observed potential structure is confirmed with numerical analysis based on fluid hydrodynamics.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Addendum to “Spatiotemporal evolution in a (2+1) -dimensional chemotaxis model” [Physica A 391 (2012) 107–112]

After our article, Physica A 391 (2012) 107–112, had been published online, T. Hillen told us about a theorem by Osaki, relevant for our numerical simulations.     

Delay driven Hopf bifurcation and chaos in a diffusive toxin producing phytoplankton‐zooplankton model

This paper deals with a diffusive toxin producing phytoplankton‐zooplankton model with maturation delay. By analyzing eigenvalues of the characteristic equation associated with delay parameter, the stability of the positive equilibrium and the existence of Hopf bifurcation are studied. Explicit results are derived for the properties of bifurcating periodic solutions by means of the normal form theory and the center manifold reduction for partial functional differential equations. Numerical simulations not only agree with the theoretical analysis but also exhibit the complex behaviors such as the period‐3, 5, 6, 7, 8, 11, and 12 solutions, cascade of period‐doubling bifurcation in period‐2, 4, quasi‐periodic solutions, and chaos. The key observation is that time delay may control harmful algae blooms (HABs). Moreover, numerical simulations show that the chaotic states induced by the period‐doubling bifurcation are purely temporal, which is stationary in space and oscillatory in time. The investigations may provide some new insights on harmful phytoplankton blooms.