Influence of Urbach Energy,Temperature, and Longitudinal Position in the Active Layer on Carrier Diffusion Length in Perovskite Solar Cells

The diffusion length of charge carriers in the active layer of a perovskite solar cell (PSC) of the structure Glass/PEDOT: PSS/CH₃NH₃PbI₃/PC60BM/Al is modelled. It is found that the diffusion length depends on the position x in the active layer measured from the PEDOT: PSS interface, Urbach energy and temperature. By varying the voltage in the range from zero to , it is shown that the dependence of diffusion length on the position x in the active layer reduces at higher voltage. The combined influence of applied voltage and temperature on the diffusion length of charge carriers is investigated and it is found that in the low voltage range the diffusion length is temperature independent, but it becomes significantly temperature dependent at higher voltages. Also, it is found that the diffusion length decreases as the applied voltage increases and this reduction becomes much more significant at higher voltage and temperatures. The combined influence of applied voltage and Urbach energy on diffusion length of charge carriers reveals that the diffusion length decreases when both the applied voltage and Urbach energy increase. However, the reduction in the diffusion length due to the increase in Urbach energy becomes less significant at higher voltage.     

食道癌患者血清铜／锌比值及血清硒含量的测定及临床意义

报道了３５例食道癌患者血清铜／锌比值及血清硒水平，结果发现食道癌患者血清铜／锌比值增加，血清硒水平下降，具有显著性差异（Ｐ〈０．００１）；同时提示随着食道癌分期增加，铜／锌比值进一步增加，血硒水平进一步下降，但无统计学差异。上述结果对临床诊断及观察病情变化有一定意义。     

In vitro TRANSFORMATION OF RAT ESOPHAGEAL EPITHELIAL CELLS BY FUSARIN C

Fusarin C (FC) is a mutagenic and carcinogenic mycotoxin which was isolated from Fu-sarium moniliforme culture extracts. The Fusarium moniliforme is one of most prevalent fungi found on corn in Linxian, a high risk area for esophageal cancer. This paper reports, for the first time, the malignant transformation of rat esophageal epithelial cells induced by FC. The transformed cells showed several characteristics of transformation. Colonies were formed after seeding these transformed cells either into selective medium free of epidermal growth factor (EGF) and serum, or on semi-solid agar; there was an increase in chromosome number; the expression of c-myc and v-erb-B oncogenes was enhanced in the cells; and squamous cell carcinomas arose after inoculating the cells into nude mice. The results demonstrated transforming effect of FC on rat esophageal epithelial cells, and indicate that the abnormal expression of some oncogenes could serve as a hew property of transformed cells.     

Novel carboxylated oligothiophenes as sensitizers in photoelectric conversion systems

Novel carboxylated oligothiophenes with different thiophene units were designed and synthesized as photosensitizers in dye-sensitized solar cells (DSSCs) for efficient opto-electric materials. The introduction of -COOH into thiophene molecules can lead to a red shift of UV-visible absorption, increase light-harvesting efficiency, and enhance photoinduced charge transport by forming efficient covalent bonds to the substrate surface. A red shift of the absorption spectrum of oligothiophene is also achieved by the increase in the number of thiophene units. The DSSCs based on the oligomers have excellent photovoltaic performances. Under 100 mW cm(-2) irradiation a short-circuit current of 10.57 mA cm(-2) and an overall energy conversion efficiency of 3.36 % is achieved when pentathiophene dicarboxylated acid was used as a sensitizer. The incident photo-to-current conversion efficiency (IPCE) has a maximum as high as 80 %. In addition, photovoltage and photocurrent transients show that slow charge recombination in DSSCs is important for efficient charge separation and excellent photoelectric conversion properties of the oligomers. These initial and promising results suggest that carboxylated oligothiophenes are efficient photosensitizers.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Room‐Temperature Solution‐Processed PbS Quantum Dot Solar Cells

Colloidal quantum dots (CQDs) are attractive absorber materials for high‐efficiency photovoltaics because of their facile solution processing, bandgap tunability due to quantum confinement effect, and multi‐exciton generation. To date, all published performance records for PbS CQDs solar cells have been based on the conventional hot‐injection synthesis method. This method usually requires relatively strict conditions such as high temperature and the utility of expensive source material (pyrophoric bis(trimethylsilyl) sulfide (TMS‐S)), limiting the potential for large‐scale and low‐cost synthesis of PbS CQDs. Here we report a facile room‐temperature synthetic method to produce high‐quality PbS CQDs through inexpensive ionic source materials including Pb(NO₃)₂ and Na₂S in the presence of triethanolamine (TEA) as the stabilizing ligand. The PbS CQDs were successfully prepared with an average particle size of about 5 nm. Solar cells based on the as‐synthesized PbS CQDs show a preliminary power conversion efficiency of 1.82%. This room‐temperature and low‐cost synthesis of PbS CQDs will further benefit the development of solution‐processed CQD solar cells.     

Photokilling Squamous Carcinoma Cells SCCVII with Ultrafine Particles of Selected Metal Oxides

The ability of ultrafine particles of TiO₂, WO₃ and iron-doped TiO₂ to kill cancer cells in the presence of UV irradiation was investigated. The best photokilling effect on carcinoma cells SCVII cultured in vitro showed iron-doped TiO₂ ultrafine particles synthesized by the sol-gel procedure with starting chemicals Ti(IV)-isopropoxide and anhydrous Fe(II)-acetate. It was found that a small particle size and high dispersity influenced citotoxicity and photocatalytic efficiency. The remarkable photokiling effect of highly iron-doped TiO₂ ultrafine particles (the molar ratio Fe/Ti = 0.136) in the presence of UV irradiation was observed. The influence of ultrafine metal oxide particles on the inhibition of cancer cell proliferation was measured using a ³H-thymidine incorporation test. The possible mechanism involved in the photokilling of carcinoma cells with ultrafine particles of selected metal oxides was discussed.     

Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites

LaGaO₃ perovskites doped with Sr or Ba at the La site and Mg at the Ga site were prepared by solid-state reaction or sol-gel method and characterized. Enthalpies of formation from constituent oxides at 298 K were determined by high-temperature oxide melt solution calorimetry. Energetic trends are discussed in terms of defect chemistry. As oxygen deficiency increases, formation enthalpies define three trends, LaGa_1−yMg_yO_3−δ (LGM), La_1−xSr_xGa_1−yMg_yO_3−δ (LSGM), and La_1−xBa_xGa_1−yMg_yO_3−δ (LBGM). They become less exothermic with increasing doping, suggesting a dominant destabilization effect from oxygen vacancies. The endothermic enthalpy of vacancy formation is 275±37, 166±18 and 138±12 kJ/mol of V_O^·· for LGM, LBGM and LSGM, respectively. Tolerance factor and ion size mismatch also affect enthalpies. In terms of energetics, Sr is the best dopant for the La site and Mg for the Ga site, supporting earlier studies, including oxygen ion conductivity and computer modeling.     

Synthesis of tumor-associated glycopeptide antigens for the development of tumor-selective vaccines

In contrast to normal cells, the glycoprotein profile on epithelial tumor cells is distinctly altered. Due to an incomplete formation of the glycan side-chains resulting from a premature sialylation, additional peptide epitopes become accessible to the immune system in mucin-type glycoproteins on tumor cells. These tumor-associated structure alterations constitute the basis for a selective immunological attack on cancer cells. For the construction of immunostimulating antigens, glycopeptide partial structures from the mucins MUC1 and MUC4 carrying the tumor-associated sialyl-T(N), alpha2,6-sialyl-T and alpha2,3-sialyl-T antigens have been synthesized. Employing different linkers such as the allylic HYCRON or the fluoride-sensitive PTMSEL anchor, the antigenic glycopeptide structures were constructed on the solid phase utilizing pre-assembled glycosyl amino acid building blocks prepared in solution by convergent chemical or chemoenzymatic strategies. The proliferation of cytotoxic T cells has been induced applying a construct composed of a sialyl-T(N) MUC1-glycopeptide conjugated with a tetanus toxin T cell peptide epitope.