Self-assembling and phase coexistence of SW trimers as complex amphiphile analogues. I. Simulations

We analyse by discrete molecular dynamics the self-assembly of SW trimer particles that contain a different number of attractive and repulsive spheres. They also have different geometries: linear, obtuse, rectangular and equilateral. We identify that some of these molecules exhibit liquid–vapour equilibria while others do not. For all of them, we show the morphological phase diagram built up from the different supra-molecular structures formed by each type of trimer. We simulated 14 different systems with a total of 321 states. The main features of the supra-molecular structures depend only on the composition and geometry of the trimer: triple SW trimers do not form supra-structures, double SW trimers and single SW trimers form monolayers, bilayers and worm-like micelles. The liquid–vapour coexistence properties are also exhibited. These trimers can be used to model complex amphiphiles beyond the standard ones, such as the Gemini and the Bola surfactants as well as colloidal particles.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点,以边单元作为求解点,改进传统的格林元方法,减少未知数和求解矩阵维度;并提出基于改进格林元的加密网格加密方法,保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比,验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析,结果表明：①格林元方法是一种高精度的动态模拟方法,将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度;②改进格林元方法的加密基于叠加原理,不需要通过插值近似,其求解精度高.在相同加密网格条件下,基于本文改进格林元方法的加密效果比有限差分加密效果更佳;③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大,在动态分析和参数反演时,应着重考虑这些因素的影响.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

海洋结构物摩擦学问题的研究进展

海洋结构物主要包括海上钻井平台、油气开采平台、FPSO、海底输油管线及海上大型储油罐等大型海上结构物.海洋结构物总是处于波浪、海流、风暴、海冰等严峻海洋环境中,并受到海生物污损、海洋腐蚀、磨损等多方面因素相互作用的影响,摩擦学问题无处不在.论文针对海洋平台结构、流体处理及运输设备、定位设备及作业设备四方面的摩擦学问题进行论述,主要介绍了海洋平台结构、管道系统及海水泵、锚链及螺旋桨、钻井套管及电潜泵等海工设备的工作特点,概述了国内外关于这类海工设备的摩擦学问题的研究现状,并对海洋结构物的摩擦学研究重点进行了展望.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

长中半径水平井钻柱接触摩擦阻力分析

用整体钻柱静力模型和间隙元法,分析了长中半径水平井钻柱的接触非线性问题,算出了钻柱与井壁接触摩擦阻力的分布,为水平井井眼轨道设计和施工提供了重要参数。     

具阻尼项的非线性波动方程的稳定集与不稳定集

本文利用势井理论讨论一类非线性波动方程的初边值问题 .我们构造其稳定集 W和不稳定集 V,证明了当初值属于 W时 ,对 β∈ R整体弱解存在并且利用乘子法得到当 β>0解的指数衰减估计 ;当初值属于 V时 ,而 β<0时 ,解将爆破     

P schl-Teller势阱中线性与非线性光学折射率变化

利用量子力学中的密度矩阵算符理论导出了P schl-Teller势阱中的线性与三阶非线性光学折射率的解析表达式。P schl-Teller势阱中有两个可调参数κ和λ,势阱的形状及其非对称性会随势阱参数的取值不同而明显不同,从而其线性与非线性光学折射率变化的大小也会随势阱参数和入射光强的变化而呈规律性的变化。文章以典型的GaAs/AlGaAs势阱为例作了数值计算,数值计算结果表明,势阱的形状和入射光强对光学折射率有着重要的影响。     

CBP/Alq3有机量子阱结构的光致发光

采用多源有机分子气相沉积系统(OMBD)制备了CBP/Alq₃有机多量子阱结构,利用电化学循环伏安特性和吸收光谱、小角X射线衍射、荧光光谱研究了量子阱的能带、结构和光致发光的特性。电化学循环伏安特性和吸收光谱的测量结果表明,CBP的最低占据分子轨道(LUMO)与最高占据分子轨道(HOMO)的位置分别为-2.74,-6.00eV,Alq₃的LUMO与HOMO的位置分别为-3.10,-5.80eV,所以CBP/Alq₃有机量子阱为Ⅰ型量子阱结构。小角X衍射测量显示,在小角的位置(2θ的范围在0°～3°)观察到了对应于量子阱结构的多级布拉格衍射峰,表明多层量子阱结构是有序的层状结构,界面比较完整,界面质量比较好。荧光光谱的研究结果表明,Ⅰ型量子阱结构可以有效地把能量从垒层传递给阱层,从而增强了阱层材料的发光。阱层的厚度对发光峰的位置影响很大,随阱层厚度减小,阱层材料的发光峰出现蓝移现象。并对引起发光峰蓝移的原因进行了讨论。     

(CdZnTe,ZnS)/ZnTe复合量子阱的光学特性研究

设计并制备了一种新型的(CdZnTe,ZnS)/ZnTe复合量子阱结构.使CdZnTe量子阱中的激子有可能在短时间内隧穿到ZnS阱层,从而达到提高光双稳器件“关”速度的目的.并通过对发光特性的研究证实在我们设计的结构中横向激子隧穿的存在,从而为进一步研究超高速光开关提供了实验依据.