Effects of mechanical loadings on the performance of a piezoelectric hetero-junction

A fully-coupled model for a piezoelectric hetero-junction subjected to a pair of stresses is proposed by discarding the depletion layer approximation. The effect of mechanical loadings on PN junction performance is discussed in detail. Numerical examples are carried out for a p-Si/ZnO-n hetero-junction under a pair of stresses acting on the ntype ZnO portion near the PN interface, where ZnO has the piezoelectric property while Si is not. It is found that the bottom of conduction band is lowered/raised near the two loading points due to the decrease/increase in the electron potential energy there induced by a tensile-stress mode via sucking in majority-carriers from two outside regions, which implies appearance of a potential barrier and a potential well near two loading points. Furthermore, the barrier height and well depth gradually become large with increasing tensile stress such that more and more electrons/holes are inhaled in loading region from the n-/p-zone, respectively. Conversely, rising/dropping of conduction band bottom is brought out near the two loading points by a compressive-stress mode due to the increase/decrease in the potential energy of electrons by pumping out the majority-carriers from the loading region to the two outside regions. Therefore, a potential well and a potential barrier are induced near the two loading points, such that more and more electrons/holes are driven away from the loading region to the n-zone/p-zone, respectively, with the increasing compressive stress. These effects are important to tune the carrier recombination rate near the PN interface. Thus, the present study possesses great referential significance to piezotronic devices.     

Water barrier characteristics of plasma polymers of perfluorocarbons

Perfluorocarbon monomers such as C₂F₄, C₂F₆, C₄F₁₀, and mixtures thereof with H₂, were subjected to plasma polymerization and deposited onto low-density polyethylene (LDPE) substrates. The effect of plasma conditions, surface characteristics, and surface dynamics of plasma polymers on their ability to improve the resistance to water vapor permeation was investigated. An optimum discharge energy density was found for a monomer which provided the greatest reduction water vapor permeability. Although all of the plasma polymers show higher hydrophobicity than polyethylene, the reduction in water vapor permeability is not uniquely related to water contact angle. The surface-dynamic stability of a plasma polymer surface was found to be the key factor in determining the barrier performance of the plasma polymer. The extent of change of surface-configuration after water immersion strongly correlated with the improvement in the water vapor permeation resistance. Plasma polymers with the higher surface-dynamic stability provided the better water barrier coating applied on LDPE films. © 1996 John Wiley & Sons, Inc.     

离心泵在启动阶段的水力特性研究

针对工作的离心泵,分析了其内部流体的流动情况,建立了在非稳定工况下操作的理论扬程公式,非稳态理论扬程包括旋转加速附加扬程和水流加速消耗扬程以及由于流动速度变化引起泵壳中的附加压力而产生的扬程。在离心泵的启动阶段,对其在不同阀门开度下的水力性能进行了试验研究。测量了瞬时转速、流量、扬程随时间的变化关系,并把试验结果进行修正。由于启动时一部分扬程用来提供流体加速,压力传感器测量不到,因此必须把试验扬程加以修正。将理论计算与修正的试验结果进行了比较分析,两者基本吻合。     

无叶扩压段型线对离心压气机性能的影响

本文设计了无叶扩压段轮盖侧型线,并采用CFD软件数值模拟了采用两种不同轮盖侧型线结构的离心压气机级．分析了无叶扩压段内部的流动结构和熵的分布．计算结果说明无叶扩压段轮盖侧型线对上游叶轮、下游叶片扩压器以及离心压气机级性能有较大影响．     

The effect of two ferromagnetic metal stripes on valley polarization of electrons in a graphene

As the key factor for designing the valleytronic devices is to well understand the valley-dependent transport mechanism in graphene, we investigate, in this work, the effect of two ferromagnetic (FM) metal stripes on the valley polarization in a graphene nanostructure with a strain. The nearly 100% valley polarization is observed at certain energy windows and it can be easily controlled through changing the width and the position of the FM stripe as well as the strength of the magnetic field induced by the FM stripe. Our interesting findings reveal the valley-dependent transport mechanism of electrons and promote the realization of the new types of valleytronic devices modulated by the FM stripe and the strain.     

Properties of RhP predicted by first-principles

Using density functional theory combined with a global crystal structure search with the particle swarm optimization method, we propose three stable three-dimensional (3D) metallic RhP structures, namely, the Cmcm (RhP-I), P6/mmm (RhP-II), and P6₃mc (RhP-III) phases. All these structures are found to be dynamically stable through vibrational normal mode calculations, indicating that they could be successfully synthesized in experiments. We show that the RhP-I phase has a relatively high thermodynamic stability and high mechanical strength in comparison with the others. The RhP-II and RhP-III phases have porous structures which could accommodate small atoms or molecules. However their thermodynamics are poor, especially the RhP-III phase. The RhP-II structure is stable at 500 K, but the RhP-III fails to survive even at the freezing point of water. Importantly, all these materials have one dimensional conducting channels corresponding to ultrahigh Fermi velocities. Moreover, the porous hexagonal RhP-II and III structures exhibit excellent ability to trap lithium, hydrogen, oxygen, and boron atoms. The RhP-II structure could be especially useful for directly dissociating the hydrogen molecule into two atoms without an energy barrier. In the present study, we identify three new metallic structures to the family of RhP structures, and anticipate their potential for technological applications.     

Role of Bipolar Pulsed DBD on the Growth of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> in Three-Phase Discharge Plasma Reactor

Algae in drinking water supplies often bring about impact on the water treatment. In this study, a bipolar pulsed dielectric barrier discharge system in three-phase discharge plasma reactor was constructed for investigating its ability to control excessive growth of cyanobacteria, Microcystis aeruginosa. Experimental results show there was almost no change in optical density immediately after the interruption of electrical discharge, but the decreasing trend of optical density, cell density and chlorophyll-a content was obvious during the incubation period, indicating a significant residual effect of electrical discharge process on the algal growth inhibition. Scanning electron microscopy investigation of algae revealed surface damage, apparent leakage of intracellular contents and pores formed after electrical discharge process, which showed that algal cells had no potential to survive and grow. Compared with the control sample, it was observed that electrical discharge on the algal extracellular products has almost no residual effect and the growth rate of algae slightly decreased before three days storage. Hydrogen peroxide was produced by electrical discharge in the μM level and showed a first-order decay. But at such level, the external addition of hydrogen peroxide alone is not likely to cause the residual effect. These results implicated that the growth inhibition of M. aeruginosa was mainly caused by electrical discharge process, and it made the algal cells lose ability to survive, demonstrating the considerable potential of such an alternative process for efficient water purification.     

治疗非小细胞肺癌脑转新药:Zorifertinib

新药Zorifertinib是阿斯利康公司针对非小细胞肺癌(NSCLC)脑转研发的一种表皮生长因子酪氨酸激酶抑制剂(EGFR-TKI),对EGFR 19外显子缺失和EGFR 21外显子L858R突变有高选择性和高抑制性,相较于其他EGFR-TKIs的突出优势是具有优秀的血脑屏障渗透性。临床研究表明Zorifertinib可以在脑内达到等同血浆的药物浓度,有效抑制脑内肿瘤生长,减少脑内肿瘤面积,并且预防脑内肿瘤形成。本文将对该新药的作用机制、研发历程、药代动力学、临床研究和安全性进行综述,为广大研究者以及今后的临床应用提供参考。     

Exploring Effects of Chitosan Oligosaccharides on the DSS-Induced Intestinal Barrier Impairment In Vitro and In Vivo

Intestinal barrier dysfunction is an essential pathological change in inflammatory bowel disease (IBD). The mucus layer and the intestinal epithelial tight junction act together to maintain barrier integrity. Studies showed that chitosan oligosaccharide (COS) had a positive effect on gut health, effectively protecting the intestinal barrier in IBD. However, these studies usually focused on its impact on the intestinal epithelial tight junction. The influence of COS on the intestinal mucus layer is still poorly understood. In this study, we explored the effect of COS on intestinal mucus in vitro using human colonic mucus-secreted HT-29 cells. COS relieved DSS (dextran sulfate sodium)-induced mucus defects. Additionally, the structural characteristics of COS greatly influenced this activity. Finally, we evaluated the protective effect of COS on intestinal barrier function in mice with DSS-induced colitis. The results indicated that COS could manipulate intestinal mucus production, which likely contributed to its intestinal protective effects.     

Ni2P-NiS双助剂促进g-C3N4光催化产氢动力学

本文通过简单的一步水热法得到Ni₂P-NiS双助催化剂,之后采用溶剂蒸发法将Ni₂P-NiS与g-C₃N₄纳米片结合构建获得无贵金属的Ni₂P-NiS/g-C₃N₄异质结。研究结果表明,优化后的复合材料具有良好的光催化产氢活性,其产氢速率最高可到6892.7 μmol·g^-1·h^-1,分别为g-C₃N₄ (150 μmol·g^-1·h^-1)、15%NiS/g-C₃N₄ (914.5 μmol·g^-1·h^-1)和15%Ni₂P/g-C₃N₄ (1565.9 μmol·g^-1·h^-1)的46.1、7.5和4.4倍。这主要归因于Ni₂P-NiS相比Ni₂P和NiS单体具有更好的载流子转移能力,其与g-C₃N₄形成的肖特基势垒能有效促进光生载流子在二者界面上的分离,同时Ni₂P-NiS能进一步降低析氢过电势,进而显著增强了表面析氢反应动力学。本研究为开发稳定、高效的非贵金属产氢助剂提供了实验基础。