Kinetic Studies of the Thermal cis-to-trans Isomerization of Dioxaphospholanes

By following a previously reported method,¹ the synthesis of r-2-alkoxy-cis-4-cis-5-dimethyl-1,3,2-λ³-dioxaphospholanes ligands (1 and 3) was carried out. The purpose of this work is the kinetic study of the inversion barrier at phosphorus for 1 and 3 and the comparison with the already informed dioxaphospholane 2. The kinetic measurements of the thermal isomerization cis-to-trans were performed by ³¹P NMR spectroscopy, observing a first order kinetics for both compounds. The energy of activation (E_a) for the epimerization of compounds cis-1 and cis-3 was calculated to be 16.0 ± 0.6 and 11.8 ± 0.8 kcal/mol, respectively. The values of the thermodynamic parameters of the transition state (Δ H^≠, Δ S^≠, Δ G^≠) suggest that the inversion at phosphorus not only depends on the spatial requirements of the alkoxy substituent but also on entropic effects. The thermodynamic parameters Δ H°, Δ S°, and Δ G° were also evaluated and they show that the cis isomers are preferred from enthalpic point of view, but entropic effects dominate the equilibrium trans ? cis leading to the entropically favored trans isomers. Furthermore, the results are supported by density functional theory calculations of 1–4 at the B3LYP/6-31G** level.     

A NEW SYSTEM EXHIBITING A HIGH BARRIER TO ROTATION ABOUT THE P—N BOND. SYNTHESES AND SPECTRAL STUDIES OF 1,3,2-DIAZAPHOSPHETIDIN-4-ONE DERIVATIVES

Abstract

1,3,2-Diazaphosphetidin-4-one derivatives were synthesized. Their ¹H NMR signals at ambient temperature displaed a broad doublet which eventually coalesced before becoming sharp upon warming, and the ¹³C NMR spectra also showed that the α-and β-carbons of the dialkylamino group were non-equivalent. The phenomena were ascribed to restricted rotation about the exocyclic P—N bond.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

多级离心连续逆流手性萃取模型及模拟

基于单级手性萃取数学模型和质量守恒定律,建立了多级离心手性萃取数学模型,设计了多级离心萃取数学模型程序,并对多级离心萃取分离苯基琥珀酸（PSA）对映体进行了模拟.模拟了相比、萃取剂浓度、对映体浓度、进料位置和萃取级数等工艺参数对萃取效果（产物纯度和产率）的影响.模拟结果表明,考察的工艺参数共同影响萃取相和萃余相的产物纯度及产率;采用中间位置进料和较大的W/F相比有利于对称分离.实验发现：采用中间位置进料,10级离心萃取后萃取相中苯基琥珀酸的光学纯度ee（对映体过量）达到56%以上.模拟结果还表明,采用26级离心萃取器,中间进料,逆流分级萃取,萃取相及萃余相中的光学纯度ee都能达到98%以上.     

十二烷基硫酸钠水溶液的动态表面吸附性质

利用MPTC型气泡压力张仪研究了十二烷基硫酸钠(SDS)溶液在不同NaCl 浓度下的动态表面吸附性质, 分析了离子型表面活性剂在表面吸附层和胶束中形成双电层结构产生表面电荷对动态表面扩散过程和胶束性质的影响. 结果表明, SDS在表面吸附过程中, 表面电荷的存在会产生5.5 kJ·mol^-1的吸附势垒(E_a), 显著降低十二烷基硫酸根离子(DS^-)的有效扩散系数(D_eff). 十二烷基硫酸根离子的有效扩散系数与自扩散系数(D)的比值(D_eff/D)仅为0.013, 这表明SDS与非离子型表面活性剂不同, 在吸附初期为混合动力控制吸附机制. 加入NaCl可以降低吸附势垒. 当加入不小于80 mmol·L^-1 NaCl后, E_a小于0.3 kJ·mol^-1, D_eff/D在0.8-1.2之间, 表现出与非离子型表面活性剂相同的扩散控制吸附机制. 同时, 通过分析SDS胶束溶液的动态表面张力获得了表征胶束解体速度的常数(k₂). 发现随着NaCl 浓度的增大, k₂减小, 表明SDS胶束表面电荷的存在会增加十二烷基硫酸根离子间的排斥力, 促进胶束解体.     

Influence of sputter power on structural and electrical properties of TiO2 films for Al/TiO2/Si gate capacitors

Titanium dioxide (TiO₂) thin films were deposited onto p‐Si substrates held at room temperature by reactive Direct Current (DC) magnetron sputtering at various sputter powers in the range 80–200 W. The as‐deposited TiO₂ films were annealed at a temperature of 1023 K. The post‐annealed films were characterized for crystallographic structure, chemical binding configuration, surface morphology and optical absorption. The electrical and dielectric properties of Al/TiO₂/p‐Si structure were determined from the capacitance–voltage and current–voltage characteristics. X‐ray diffraction studies confirmed that the as‐deposited films were amorphous in nature. After post‐annealing at 1023 K, the films formed at lower powers exhibited anatase phase, where as those deposited at sputter powers > 160 W showed the mixed anatase and rutile phases of TiO₂. The surface morphology of the films varied significantly with the increase of sputter power. The electrical and dielectric properties on the air‐annealed Al/TiO₂/p‐Si structures were studied. The effect of sputter power on the electrical and dielectric characteristics of the structure of Al/TiO₂/p‐Si (metal‐insulator‐semiconductor) was systematically investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

The metallic C6S monolayer with high specific capacity for K-ion batteries

K-ion batteries (KIBs) attract considerable attention due to the abundance of K, high-working voltages, and chemical similarity with Li, enabling the utilization of mature Li-ion technology. However, shortage of high-performance anode materials is a critical obstacle for the development of KIBs. Through first-principles swarm-intelligence structural search, we identify a potential anode material, the C₆S monolayer, which provides not only a remarkably high specific capacity of 1546 mAh/g but also a low diffusion barrier of 0.11 eV and a low open-circuit voltage of 0.21 V. Inherent metallicity originates from delocalized π electrons.     

Improved Dermal and Transdermal Delivery of Curcumin with SmartFilms and Nanocrystals

Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.     

Isolation of Volatile Compounds with Repellent Properties against Aedes albopictus (Diptera: Culicidae) Using CPC Technology

The present work describes the use of Centrifugal Partition Chromatography (CPC) for the bio-guided isolation of repellent active volatile compounds from essential oils. Five essential oils (EOs) obtained from three Pinus and two Juniperus species were initially analyzed by gas chromatography–mass spectrometry (GC/MS) and evaluated for their repellent properties against Aedes albopictus. The essential oil from needles of P. pinea (PPI) presented the higher activity, showing 82.4% repellency at a dose of 0.2 μL/cm². The above EO, together with the EO from the fruits of J. oxycedrus subsp. deltoides (JOX), were further analyzed by CPC using the biphasic system n-Heptane/ACN/BuOH in ratio 1.6/1.6/0.2 (v/v/v). The analysis of PPI essential oil resulted in the recovery of (−)-limonene, guaiol and simple mixtures of (−)-limonene/β-pheladrene, while the fractionation of JOX EO led to the recovery of β-myrcene, germacrene-D, and mixtures of α-pinene/β-pinene (ratio 70/30) and α-pinene/germacrene D (ratio 65/45). All isolated compounds and recovered mixtures were tested for their repellent activity. From them, (−)-limonene, guaiol, germacrene-D as well the mixtures of (−)-limonene/β-pheladrene presented significant repellent activity (>97% repellency) against Ae. albopictus. The present methodology could be a valuable tool in the effort to develop potent mosquito repellents which are environmentally friendly.