微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

Microwave-assisted synthesis of new pyrimido[4′,5′：4,5]thiazolo[3,2-α] benzimidazol-4（3H）-one derivatives in solvent-free condition

Microwave-assisted synthesis of new 2-arylpyrimido[4′,5′：4,5]thiazolo[3,2-α]benzimidazol-4（3H）-ones from 3-aminothia- zolo[3,2-α]benzimidazol-2-earboxamide and aroyl halides in solvent-free condition is described. In comparison with classical conditions the reactions are faster and the yields are higher under microwave irradiation.     

Mode selective directional couplers for overmoded waveguide systems

Two types of directional couplers for transverse electric (TE) modes are described: short and multihole couplers, respectively. They selectively pick one mode out of a mode mixture in an overmoded circular waveguide system. Unwanted modes are either statistically kept at low level or are suppressed by destructive interference in the coupling waveguide. Mode selectivity and directivity in multihole couplers oscillate up and down with an increasing number of holes, finally reaching a minimum of approximately 20 dB, unless there are competing modes with rational fractions of the beat wavelength. A multihole coupler for the TE₀₂ mode (28 GHz, 63.4 mm waveguide diameter, 41 holes) and a length of 1.6 m shows a calculated directivity of 68 dB and suppresses the unwanted modes TE₀₁ with 34 dB (24 dB), TE₂₂ with 37 dB (45 dB), and further modes TE_m (<5, m<6) with 17 dB to 34 dB in forward direction (figures in parentheses are for unwanted modes propagating in backward direction).A short directional coupler for the TE₀₁ mode (28 GHz, 63.4 mm waveguide diameter) with 16 holes and a length of 230 mm shows a directivity of 55 to 100 dB between 27.9 and 28.1 GHz, suppressing the TE₀₂ mode with 35 to 80 dB, the TE₀₃ mode with 30 to 65 dB, and the TE₂₂ mode with 30 to 70 dB.     

Zinc-catalyzed Williamson ether synthesis in the absence of base

Zinc powder was found to be a highly efficient catalyst for the synthesis of aromatic ethers using microwave heating in the presence of N,N-dimethylformamide as well as under stirring in an oil-bath using tetrahydrofuran as solvent without any inorganic base. This method can be used for selective mono-, di- or tri-O-alkylations.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

A central limit theorem for age- and density-dependent population processes

Consider a population consisting of one type of individual living in a fixed region with area A. In [8], we constructed a stochastic population model in which the death rate is affected by the age of the individual and the birth rate is affected by the population density P_A(t), i.e., the population size divided by the area A of the given region. In [8], we proposed a continuous deterministic model which in general is a nonlinear Volterra type integral equation and proved that under appropriate conditions the sequence P_A(t) would converge to the solution P(t) of our integral equation in the sense that

$\text{lim}\text{→∞}\text{P}\text{sup}\text{0?s?t}\text{|P}{}_{\mathrm{A}}\text{(s) ? P(s)|>ε}\text{=0}\text{for every}\text{ε > 0}$

.In this paper, we obtain a “central limit theorem” for the random element √A(P_A(t)?P(t)). We prove that under appropriate conditions √A(P_A(t)?P(t)) will converge to a Gaussian process. (See Theorem 3.4 for the explicit formula of this Gaussian process.)     

液相微波介电加热法制备纳米粒子的研究进展

随着纳米科技的飞速发展,合成纳米材料的新方法层出不穷。在这些新方法当中,液相微波介电加热法近年来得到了飞速的发展,引起了科学界越来越多的关注。本文介绍了近年来液相微波介电加热法制备纳米粒子的一些研究进展,主要是该方法在制备金属、过渡金属氧化物和金属硫族化合物纳米粒子中的应用,并且对该领域未来的发展作了一些展望。     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Highly efficient approach for characterizing nanometer-sized gold particles by capillary electrophoresis

This paper demonstrates that capillary electrophoresis (CE) can be employed for characterizing the sizes of nanometer-scale gold particles. We characterized the gold nanoparticles by effecting CE separation using a buffer of SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 11.0 and an applied voltage of 18 kV and obtained a linear relationship (R² > 0.99) between electrophoretic mobilities and size for nanoparticles whose diameters fall in the regime from 5.0 ± 0.5 to 41.2 ± 3.3 nm; the relative standard deviations of these electrophoretic mobilities are <0.8%. We evaluated the feasibility of employing these separation conditions for the size characterization by of gold nanoparticle samples that were synthesized by a rapid microwave heating method. We confirmed that this CE method is a valid one for size characterization by comparing the results obtained by CE with those provided by scanning electron microscopy (SEM); a good correlation exists between these two techniques. Our results demonstrate that CE can be employed to accelerate the analysis of the sizes of nanomaterials.