Wettability of cellular polyurethane

Cellular polymers constitute an important field of investigation due to their unique properties as shock absorbers and thermal or acoustic insulators. The knowledge of the wetting properties of these materials is important in applications where adhesion or weathering behavior are an issue. In this study, cellular polyurethane polymers were used to investigate the effect of the cellular structure on the wetting properties. The polymeric substrates were analyzed by scanning electron microscopy and the wetting properties were studied by goniometry. The contact angles of water and diiodomethane were measured as a function of time and the surface tension of the expanded polymers was evaluated by the geometric and harmonic mean methods. It was found that the wettability and the surface energy of the cellular polymers increase as the density decreases. © 1997 John Wiley & Sons, Inc.     

考虑驾驶方式改变的一维元胞自动机交通流模型

在一维元胞自动机交通流WWH模型和SDNS模型的基础上,建立了考虑驾驶方式改变的元胞自动机模型（Change-CA模型）.具体描述为驾驶员可根据交通环境选择不同的驾驶方式在道路上驾车行驶,以各自的演化规则进行状态更新,同时定义了驾驶方式更新原则.通过计算机数值模拟,发现驾驶方式可变时,模型模拟得到的混合交通流流量较大;保守型驾驶方式对交通流变化的影响随改变概率增大而减少.并且在演化过程中,驾驶方式改变频率的变化趋势与改变概率、安全概率密切相关.与NS模型和SDNS模型相比,Change-CA模型减少了车流 关键词： 交通流 元胞自动机 驾驶方式 计算机数值模拟     

Negative compressibility property in hinging open-cell Kelvin structure

A new three-dimensional(3 D) cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property. It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations. And further study shows that the images of compressibility are symmetrical about the certain lines, which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry. A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore, a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.     

Interfacial interaction in carbon fiber/thermoplastic composites

This work was undertaken in order to increase the understanding of the mechanism responsible for fiber/matrix interaction in carbon fiber/thermoplastic composite. From results of previous study on carbon fiber/PEEK composite, which suggested that the formation of the fiber/ matrix interaction was primarily related to a chemisorption mechanism, a study was done of the conditions required to obtain efficient fiber/matrix interaction in PA-12 and PP/carbon fiber composites. The interest in studying carbon fiber composite based on PP and PA-12 was that these two matrices are very different in terms of reactivity, polyamide having many more reactive groups than polypropylene. As expected, due to the non-reactive chemical structure of the polypropylene, fiber/matrix interaction in carbon fiber/PP composite occurred only when the matrix was thermally degraded, i.e. when the composite was molded at high temperature or under long residence time at the melt temperature. For the carbon fiber/PA-12 composite, strong fiber/matrix interaction occurred readily at relatively low molding temperature, i.e. well before thermal degradation of the matrix. It was also found that the short beam shear strength in these composites seems to evolve with molding temperature, and a maximum interfacial strength was observed at a molding temperature corresponding to the thermal degradation of the matrix. This indicates that although matrix degradation often results in strong reduction in the composite performance, some matrix degradation can be beneficial in terms of interfacial mechanical properties. Finally, this work demonstrated that while the formation of fiber/matrix interaction seems to be primarily related to a chemisorption mechanism, the contribution of interphase crystallinity to the interfacial strength is not negligible. In fact, interfacial crystallinity was found to be essential to ensure optimum interfacial strength.     

双车道多速车辆混合交通流元胞自动机模型的研究

把NaSch模型的刹车概率分开为独立的加速和减速概率，引入转道规则，建立了双车道多速车辆的混合交通流模型.通过计算机数值模拟，得出了不同参数下混合交通的速度和流量与 密度关系的基本图.结果表明，转道概率、混合比例和加减速概率对混合交通都有重要的影 响，慢车的特性对混合交通起着决定性的作用. 关键词： 元胞自动机 混合交通流 NaSch模型     

Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropylene

The relationships between structure and properties have been established for isotactic polypropylene, iPP, homopolymers synthesized by metallocene catalyst systems. These iPPs exhibit different isotacticity degrees and molecular weights, and several thermal treatments during their processing have been applied. The most important factor affecting the structure and properties of these polymers is the isotacticity content. The thermal treatment, i.e., the rate of cooling from the melt, is also important and a clear molecular weight effect has been also found for the sample with lowest M_w. These factors affect the thermal properties, the degree of crystallinity and, therefore, the structural parameters and the viscoelastic behavior. A slow cooling from melt favors the formation of the γ phase instead of the α modification. The storage modulus, Young modulus and microhardness values increase as crystallinity does, independently of the origin of this increase: higher isotacticity or application of a slow crystallization from the melt.     

13C CP/MAS NMR studies of morphological changes in polypropylene: 2. The double melting endotherm of spunbonded fabrics

The double melting endotherm of spunbonded isotactic polypropylene (iPP) fabrics was investigated by monitoring changes in the solid-state NMR spectrum that result from thermal annealing. The DSC melting thermogram was found to change from a double to a single endotherm at anneal temperatures ≥156°C, with a concomitant increase in percent crystallinity. All of the carbon resonances in the CP/MAS NMR spectrum of the purely crystalline phase of iPP were found to be composed of multiple peaks with relative intensities that depend on anneal temperature. By monitoring the changes in the distribution of intensity among the various peaks of a given resonance, a transition temperature of 156°C was identified. Arguments are presented that this redistribution of intensity within a given carbon resonance characterizes the transformation from the α₁ to the α₂ monoclinic crystal form. The exothermicity associated with this transformation is responsible for the observation of a double melting endotherm by DSC. The splitting patterns observed in the NMR spectrum are discussed in terms of interlayer distances between layers of isochiral helices and the density of exposed methyls at the contact faces of these interlayers. © 1996 John Wiley & Sons, Inc.     

聚丙烯微孔膜的等离子体接枝聚合改性

利用拉伸时的晶型转变致孔特性,从β晶相聚丙烯经单向或双向拉伸制得了新型聚丙烯微孔膜、用等离子体接枝聚合技术接上了亲水性聚合物如聚丙烯酸、聚丙烯腈等。研究了等离子体处理时间、单体性质对得到的亲水膜的亲水性、离子/溶质渗透性的影响。发现接枝聚丙烯酸的双向拉伸膜对Na~+、Mg~(++),尿素有较大的渗透性,并具有优良的形状稳定性。     

聚丙烯中空纤维膜的微孔结构的控制

通过熔纺／冷拉伸法制备了微孔聚丙烯中空纤维膜。研究了工艺条件对微孔聚丙烯中空纤维膜的微孔结构与性能的影响。结果表明：随着纺丝温度的下降或熔体拉伸比的提高，最大可几孔径及孔隙率增大；熔纺中冷却风速提高，最大可几孔径及孔隙率较大；温度低于110℃时，热处理对最大可几孔径及孔隙率的影响较小，在120－130℃时，随着热处理温度的增加，最大孔径及孔隙率有明显增加的趋势；随着初纺中空纤维拉伸倍数的增加，孔隙率先增加而后下降。