An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

苯乙烯和丙烯酸-β-羟乙酯不同温度的竞聚率测定

苯乙烯和丙烯酸 β 羟乙酯不同温度的竞聚率测定吴平平吴玉芳陆琛杨全兴韩哲文（华东理工大学材料科学研究所上海２００２３７）陈顺喜朱清仁（中科院中国科技大学结构分析开放实验室合肥２３００２６）关键词苯乙烯，丙烯酸 β 羟乙酯，共聚合，竞聚率丙烯酸 β?..     

乙基橙与α,β,γ-环糊精包结物诱导圆二色性的研究

本文研究了乙基橙(EO)α、β、γ、环糊精(CD~x)包结物的诱导圆二色性(ICD)。用Kirkwood偶合振动模型探讨了包结物的包结形式都为轴向包结。然后利用Job连续变量作图法确定了其络合比, 即a-CDx/EO=1:1,βCDx(γ-CDx)/EO=2:1、1:1。     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.     

Metrological role of neutron activation analysis. IB. Inherent characteristics of relative INAA as a primary ratio method of measurement

This is the second part of a paper which deals with the advantages and disadvantages of relative instrumental neutron activation analysis concerning traceability and uncertainty, and the current scope and possible future extensions of neutron activation analysis as a primary ratio method. The first part of this paper has been published in this Journal [1]. Received: 19 March 2001 Accepted: 2 October 2001     

轻稀土硝酸盐与邻菲罗啉(Phen)高配比混配配合物的合成和表征

本文采用水-有机溶剂合成了三个稀土硝酸盐与邻菲罗啉的混配配合物,通过元素分析、红外、差示扫描和热重等分析测试手段,确证了配合物的组成为Ln(Phcn)_4(NO_3)_3·3H_2O,并研究了它们的性质。     

A new type of two-dimensional packed + capillary column GC system. I. Theory

Summary To match the need of high efficiency capillary column (plate number N₂, Plate height H₂ and carrier gas linear velocity U₂), a new high efficiency packed column (N₁, H₁ and U₁) at high carrier gas velocity with small capacity factor has been developed in the light of theoretical discussion of factors effecting the column efficiency utilization ratio.     

带功能基的全氟烷基乙烯基醚的研究——4.四氟乙烯与全氟-3,6-二氧杂-4-甲基-△~7-辛基磺酰氟溶液共聚反应单体竞聚率的测定

在乙烯-四氟乙烯溶液共聚合体系研究中,我们曾编制了一个简易的计算机程序,用于测定二种单体的共聚竞聚率,这一方法计算方便,而且可以避免原先作图法中的误差,结果较为可靠。前文我们报道了四氟乙烯与两个新的全氟烷基乙烯基醚的共聚合反应,并对其中一个新单体——7,7-二氯-3-氧杂-全氟庚烯-1——与四氟乙烯的共聚进行了单体竞聚率的测定。结果表明,这一新的含氟烯醚单体的聚合活性较其它已有报道的同类单体大。为了验证这一     

Hydroxyapatite gels and nanocrystals prepared through a sol-gel process

We have investigated the effect of the Ca/P molar ratio on the structural and morphological properties of hydroxyapatite (HA) gels and nanocrystals. The sol-gel process was carried out in aqueous, and alternatively in alcoholic medium (50% water-50% ethanol), at 37°C. Gel samples were obtained by drying the sols at 37°C or at 80°C, whereas powder samples were obtained by filtering the sols. Heat treatment at temperatures as low as 300°C is enough to obtain pure HA from the gels with a Ca/P molar ratio of 1.00 and 1.67. At variance, heat treatment of the gels with a Ca/P of 2.55 always produces secondary phases. The degree of crystallinity of HA increases with the Ca/P molar ratio of the sols, and it is slightly affected by the presence of ethanol in the precipitation medium. Filtering of the sols provides powders constituted of nanocrystalline HA that exhibit degree of crystallinity, crystal morphology and thermal stability closely related to the sols composition.     

Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.