MMA-EA-AA无皂共聚胶乳中羧基分布的研究

用无皂乳液聚合法合成了粒径窄分布的MMA EA AA三元共聚胶乳 ,用电导滴定法测定了羧基在胶乳中的分布 ,系统研究了聚合体系中各组分对胶乳中羧基分布的影响 .结果表明随着NH4 HCO3用量的增加 ,表面羧基含量 (Sa)、表面羧基密度 (Sd)和水相羧基含量 (Fa)逐渐增大 ,包埋羧基含量 (Ea)明显降低 ;随着AA用量的增加 ,Sa、Sd 、Fa 和Ea 均逐渐增大 ,但包埋羧基百分比也呈增大趋势 ;随着引发剂用量的增加 ,Sd 和Ea 逐渐减小 ,而Fa 先增大然后趋于恒定 .     

Synthesis and photophysical properties of metal free, titanium, magnesium and zinc phthalocyanines substituted with a single carboxyl and hexylthio groups

2,3,9,10,16,17,23,24-Octakis(hexylthio)phthalocyanines (4a-6a) and 2-carboxy-9,10,16,17,23,24-hexakis(hexylthio)phthalocyanines (4b-6b) were synthesized using a one-pot method by cyclotetramerization of the phthalonitriles: 4,5-bis(hexylthio)phthalonitrile and carboxylic acid phthalonitrile. 2-Carboxycatecholato-2,3,9,10,16,17,23,24-octakis(hexylthio)phthalocyaninatotitanium(IV) (8) was prepared from 2,3,9,10,16,17,23,24-octakis(hexylthio)phthalocyaninatooxotitanium(IV) (7). The structures of these compounds were characterized by using elemental analyses, UV-Vis, FT-IR, ¹H NMR and mass spectroscopies. Their photophysical properties were also studied. The Φ_F values are 0.12, 0.02, 0.10, 0.06, 0.10, 0.06, 0.65, 0.80 and the Φ_T values are 0.58, 0.56, 0.57, 0.64, 0.22, 0.48, 0.17, 0.12 for 4-8, respectively. The Φ_F value for complex 8 is higher than ever reported for phthalocyanine complexes. The triplet lifetimes (τ_T) values for all the complexes were generally good, ranging from 50 to 310 μs, and generally increased in the presence of the single carboxyl group. These complexes showed reasonable triplet quantum yields and lifetimes, and hence have potential for use as photosensitizers in photodynamic therapy (PDT) of cancer.     

Solvent sensitivity of ortho substituent effect on 13C NMR chemical shift of the carboxyl carbon (δco) in benzoic acid

A reverse ortho effect is observed for the (13)C NMR chemical shifts of the carboxyl carbon (δ(co)) in benzoic acids measured in aprotic solvents of varying polarity. The ortho effect on δ(co) is best described by a combination of the reverse field and steric accelerating effects of the substituent in an 80: 20 pattern in apolar aprotic solvents and a 60: 40 pattern in dipolar aprotic ones. Interestingly, no good enough correlation was found between δ(co) and log k(1) of the acids measured in similar solvents. A critical analysis of the results clearly indicates the use of an apolar aprotic solvent and not a dipolar aprotic one as the solvent of choice for investigating intrinsic substituent effects on δ(c) in an aromatic system.     

Enhancing CO2 Separation Ability of a Metal–Organic Framework by Post‐Synthetic Ligand Exchange with Flexible Aliphatic Carboxylates

A series of porous metal–organic frameworks having flexible carboxylic acid pendants in their pores (UiO‐66‐ADn: n=4, 6, 8, and 10, where n denotes the number of carbons in a pendant) has been synthesized by post‐synthetic ligand exchange of terephthalate in UiO‐66 with a series of alkanedioic acids (HO₂C(CH₂)_n?2CO₂H). NMR, IR, PXRD, TEM, and mass spectral data have suggested that a terephthalate linker in UiO‐66 was substituted by two alkanedioate moieties, resulting in free carboxyl pendants in the pores. When post‐synthetically modified UiO‐66 was partially digested by adjusting the amount of added HF/sample, NMR spectra indicated that the ratio of alkanedioic acid/terephthalic acid was increased with smaller amounts of acid, implying that the ligand substitution proceeded from the outer layer of the particles. Gas sorption studies indicated that the surface areas and the pore volumes of all UiO‐66‐ADns were decreased compared to those of UiO‐66, and that the CO₂ adsorption capacities of UiO‐66‐ADn (n=4, 8) were similar to that of UiO‐66. In the case of UiO‐66‐AD6, the CO₂ uptake capacity was 34 % higher at 298 K and 58 % higher at 323 K compared to those of UiO‐66. It was elucidated by thermodynamic calculations that the introduction of flexible carboxyl pendants of appropriate length has two effects: 1) it increases the interaction enthalpy between the host framework and CO₂ molecules, and 2) it mitigates the entropy loss upon CO₂ adsorption due to the formation of multiple configurations for the interactions between carboxyl groups and CO₂ molecules. The ideal adsorption solution theory (IAST) selectivity for CO₂ adsorption over that of CH₄ was enhanced for all of the UiO‐66‐ADns compared to that of UiO‐66 at 298 K. In particular, UiO‐66‐AD6 showed the most strongly enhanced CO₂ uptake capacity and significantly increased selectivity for CO₂ adsorption over that of CH₄ at ambient temperature, suggesting that it is a promising material for sequestering CO₂ from landfill gas.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

A Novel Estimation Method of the Distribution of Carboxyl Groups Within Copolymer Particles Using Isothermal Titration Calorimeter

Summary: A novel quantitative method using isothermal titration calorimeter (ITC) for the estimation of the distribution of carboxyl groups within polymer particles has been proposed. The method has been employed to clarify the difference in the distribution between the particles prepared by batch emulsion copolymerization of styrene and methacrylic acid under inefficient and efficient stirring conditions. At inefficient stirring, monomer was floating as a layer on the aqueous medium, whereas at efficient stirring, the monomer phase was dispersed as droplets. Under inefficient stirring, methacrylic acid (MAA) polymerized faster than styrene (S) due to a slower diffusion rate of S than MAA into the aqueous medium, while under efficient stirring, S and MAA copolymerized at similar rates. ITC measurement showed that under inefficient stirring, the carboxyl groups were distributed mainly in the center of the particles, and their number decreased toward the surface. On the other hand, under efficient stirring, carboxyl groups were distributed homogeneously inside the particle.     

Synthesis of core-shell material rich in carboxyl groups and its application in the selective adsorption of cationic peptides

The ability to extract peptides and proteins from biological samples with excellent reusability, high adsorption capacity, and great selectivity is essential in scientific research and medical applications. Inspired by the advantages of core-shell materials, we fabricated a core-shell material using amino-functionalized silica as the core. Benzene-1,3,5-tricarbaldehyde and 3,5-diaminobenzoic acid were used as model organic ligands to construct a shell coating by alternately reacting the two monomers on the surface of silica microspheres. The resultant material featured an outstanding capability for the adsorption of cationic peptides, most likely owing to its porous structure, a large number of carboxylic functional groups, and low mass-transfer resistance. The maximum saturated adsorption capacity reached 833.3 mg/g and the adsorption process took only 20 min. Under optimized adsorption conditions, the core-shell material was used to selectively adsorb cationic peptides from the tryptic digestive solution of lysozyme and bovine serum albumin, Specifically, the analysis results showed seven cationic peptides in the eluate and twenty anionic peptides in the supernatant, which indicates the efficient trap of most cationic peptides in the digestive solution.     

巯基/羧基修饰硅藻土及其对Pb(Ⅱ)、Cd(Ⅱ)的吸附性能

以3-巯基丙基三甲氧基硅烷(MPTS)、3-氨基丙基三乙氧基硅烷(APTES)、柠檬酸(CA)为原料,采用水浴法、水浴/低温水热法,分别制备了巯基(—SH)、氨基/羧基(—NH2/—COOH)表面修饰的硅藻土.采用傅里叶变换红外光谱、扫描电子显微镜、氮气吸附-脱附测试、热重/差示扫描量热法、X射线光电子能谱等技术对样品...     

以吡啶-2,5-二羧酸或噻吩-2,5-二羧酸为配体的过渡金属配合物的合成、晶体结构及性质

以吡啶-2,5-二羧酸(2,5-pyridinedicarboxylic acid,H_2L_1)、噻吩-2,5-二羧酸(Thiophene 2,5-dicarboxylic acid,H_2L_2)为主要配体,4,4′-联吡啶(4,4′-bipy)、菲咯啉(phen)为辅助配体,采用溶剂热法成功合成了3个过渡金属配合物:[Co_2(L_1)_2(bipy)(H_2O)_6]·bipy·H_2O (1)、[Cu(L_2)_2(bipy)_2]n(2)、[Ni_2(L_2)(phen)_2(H_2O)_4](3),并利用X射线单晶衍射法、红外光谱(IR)、荧光光谱(FL)和热重分析(TG/DTG)等测试手段对其进行了表征。单晶结构分析表明:配合物1、配合物2为P1空间群,配合物3为P2/n空间群;配合物1和配合物3为零维双核小分子结构,配合物2为二维层状结构。