Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

Surface modification of multi-walled carbon nanotubes by O2 plasma

The surface modification of multi-walled carbon nanotubes (MWCNTs) by O₂ plasma was carried out in this study. In order to achieve a relatively homogeneous treatment of MWCNTs powder, a rotating barrel fixed between the two discharge electrodes was used. The effect of plasma treatment parameters, such as power, time, and positions of samples (inside and outside the barrel), on the morphology and structure of MWCNTs surface was systematically analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The results showed that the direct discharge (outside the barrel) could result in not only a quick grafting of polar functional groups but also an easy damage of MWCNTs after longer time, particularly under intensive power. It was found that the surface of MWCNTs powder might be changed in three steps—expansion (loosed structure formed), peel off and oxidization with increasing of treatment time during the irradiation. In this way, a complete purification of MWCNTs powder could be finished within 30 min via plasma treatment. Our work suggested that plasma treatment could be a simple and nonpolluting method for a large scale purification of MWCNTs.     

Field electron emission images of multi-walled carbon nanotubes

Field electron emission microscope images from multi-walled carbon nanotubes can typically be characterized by the presence of five pentagons surrounding a sixth central pentagon. The observations of bright line centered interference patterns between adjacent pentagons in the field electron emission microscope images of multi-walled carbon nanotubes have been reported in the literature. We have observed a shift from bright to dark line centered interference patterns and associated this with the presence of surface adsorption. In order to identify the origin of the contaminant, multi-walled carbon nanotubes were dosed with H₂, H₂O, CO and O₂ and then imaged in the field electron emission microscope. Only the samples exposed to O₂ showed a shift from a bright line centered pattern between adjacent pentagons of a clean surface to a dark line centered pattern when one pentagon was contaminated or a bright line centered pattern when both adjacent pentagons become contaminated. The results of the experimental studies and the modeling of the changes in the field emission pattern as phase shifts in the wave function of the tunneling electrons due to modifications in the surface work function are presented.     

碳纳米管束中的正电子理论

采用中性原子叠加模型和有限差分方法(SNA-FD)计算了大范围内不同管径的单壁碳纳米管束中的正电子情况，发现对于单壁碳纳米管束，正电子的主要湮没区域，湮没对象和正电子寿命随碳纳米管管径的不同而发生规律性变化.计算得到管径范围在0.8—1.6nm的碳纳米管束的正电子寿命范围为332—470ps，与实验测得的394ps符合较好.     

The role of F A1:Ag+ defects in laser light generation and coadsorption of CO and halogen atoms at the KCl and KBr surface sites. First principles calculations

F _A1:Ag⁺ color center at the low coordination (100) and (110) surface sites of KCl and KBr thin films play an important role in providing tunable laser oscillation and adsorbatesubstrate interactions. Double-well potentials at this site are investigated using ab initio molecular electronic structure calculations. The calculated Stokes shifted (optical transition bands), opticaloptical conversion efficiencies, the probability of orientational destruction, exciton (energy) transfer and Glasner-Tompkins empirical rule suggest that laser light generation is sensitive to (i) the lattice anion, (ii) the coordination number of surface ions, and (iii) the choice of the basis set centered on the anion vacancy. The adsorbate-substrate interactions were found to be dependent on the electronegativity of the adatom and on the lattice anion. Optimised geometries and the coadsorption of CO and (F, Cl, Br, I) on KCl and KBr (100) crystals are presented. Calculated chemisorption energies for CO on the (halogen atom/defect free sites of KCl and KBr (100) crystals) showed that the coadsorption of halogen atom tends to block other adsorbate-substrate interactions at the nearest neighbour sites. Thus if halogen atom coverage increases, the CO prefers to be adsorbed on the K⁺ site of the KCl and KBr (100) surfaces and on KBr relative to KCl.      

Ultra fine carbon nitride nanocrystals synthesized by laser ablation in liquid solution

Crystalline carbon nitride nanopowders and nanorods have been successfully synthesized at room temperature and pressure using the novel technique of pulsed laser ablation of a graphite target in liquid ammonia solution. High-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and Fourier transform infrared spectroscopy (FTIR) were used to systematically study the morphology, nanostructure and chemical bonding. The experimental composition and structure of the nanoparticles are consistent with the theoretical calculations for α-C₃N₄. After 2 h ablation the particles had a size distribution ∼8–12 nm, whereas after 5 h ablation the particles had grown into nanorod-like structures with a crystalline C₃N₄ tip. A formation mechanism for these nanorods is proposed whereby nanoparticles are first synthesized via rapid formation of an embryonic particle, followed by a slow growth, eventually leading to a one-dimensional nanorod structure.     

Molecular dynamics simulations of hydrogen adsorption/desorption by palladium decorated single-walled carbon nanotube bundle

Utilising molecular dynamics simulations, the hydrogen molecules adsorption isotherms of the (8,?0) palladium decorated single-walled carbon nanotube (SWNT) were obtained. The hydrogen adsorption was studied on the external, interstial and internal surfaces of the SWNT bundle at several temperatures ranging from 77 to 400?K. The results were compared with the bare single-walled carbon nanotube bundle under the same conditions. The decorated carbon nanotube bundle hydrogen adsorption was significantly higher than that of the bare one. The hydrogen desorption and readsorption were studied using temperature as the readsorption/desorption variable. The rate constants were calculated for the hydrogen desorption at different temperatures. The calculated decorated SWNT bundle hydrogen desorption activation energy was higher than that for the bare SWNT bundle. The calculated activation energies for the hydrogen desorption in both nanotube bundles specified the temperature dependency of hydrogen desorption.     

Wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes with surface and nonlocal effects

In this paper, the transverse wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes is investigated based on nonlocal elasticity theory with consideration of surface effect. The governing equation is formulated utilizing nonlocal Euler-Bernoulli beam theory and Kelvin-Voigt model. Explicit wave dispersion relation is developed and wave phase velocities and frequencies are obtained. The effect of the fluid flow velocity, structural damping, surface effect, small scale effects and tube diameter on the wave propagation properties are discussed with different wave numbers. The wave frequency increases with the increase of fluid flow velocity, but decreases with the increases of tube diameter and wave number. The effect of surface elasticity and residual surface tension is more significant for small wave number and tube diameter. For larger values of wave number and nonlocal parameters, the real part of frequency ratio raises.     

硼碳氮纳米管的热解法制备及生长机理研究

以乙二胺、二茂铁和硼氢化钠为原料,以N2和H2为辅气,用钴作催化剂,在不同温度下制备出了具有竹节状结构的硼碳氮(BCN)纳米管.根据透射电子显微镜观察,分析了BCN纳米管的生长机理.B和N的同时掺杂,所形成的五边形结构比单独N掺杂时具有更低的形成能,是竹节状结构形成的主要原因.用Raman光谱可以用来表征BCN纳米管中B和N的掺杂程度及纳米管的质量.分析表明,在860℃下制备的BCN纳米管竹节状结构最密集,质量最好,产率最高.扫描俄歇微探针分析表明,在860℃下制备的BCN纳米管的元素组成比为B∶N∶C= 关键词： BCN纳米管 热解 透射电子显微镜 Raman光谱     

碳量子点/曙红Y比率型荧光探针测定L-抗坏血酸

以天然生物质去皮的蓖麻为碳源,采用一步水热法合成了荧光性能优良的绿色荧光蓖麻碳量子点(CO-CQDs),对其形貌和发光性能进行了表征。通过将该CO-CQDs与荧光极强的卤代荧光素染料曙红Y(EY)复合,二者可形成荧光发射峰相距较远的新型CO-CQDs/EY复合物。在pH=4.00的Na₂HPO₄-柠檬酸缓冲溶液中,在320 nm的激发波长下,CO-CQDs/EY复合物于405 nm和540 nm处显示出两个独立的荧光发射峰。在该体系中加入Cr(Ⅵ),405 nm和540 nm两处的荧光信号均显著猝灭。L-抗坏血酸(L-ascorbic acid,AA)的加入可使复合物于540 nm的荧光信号恢复,而405 nm处的荧光强度基本不变。据此建立了一种以CO-CQDs/EY复合物为比率型荧光探针测定AA的新方法。实验测定了荧光信号恢复的最佳条件和影响荧光恢复的因素,初步探讨了反应机理。在优化的实验条件下,该探针于540 nm/405 nm两处的荧光强度比值与AA的浓度在5.0×10^-8～4.0×10^-6 ...