Alkylhydrazides and their protonated forms: Physical methods andab initio calculations

The basicity of hydrazides of the highest aliphatic carboxylic acids RC(O)NHNH₂ (R = C_nH_2n+1,n = 5-12) has been studied by potentiometric titration, and IR and¹H NMR spectroscopy.Ab initio Hartree-Fork calculations using the 6–31G^* basis set with full optimization of geometry were carried out on the simplest acy1hydrazines and their possible protonated forms. Based on these calculations, and the 1R and¹H NMR spectra, the tautomerism of alkylhydrazides and the structures of their protonated forms are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2645–2649, November, 1996.     

One-pot triple functionalization of carbon nanotubes

Carbon nanotubes (CNTs) are very promising as carriers for the delivery of bioactive molecules. The multifunctionalization of CNTs is necessary to impart multimodalities for the development of future CNT-based multipotent therapeutic constructs. In this context, we report the first example of covalent trifunctionalization of different types of CNTs. Our strategy is a simple and efficient methodology based on the simultaneous functionalization of the nanotube surface with three different active groups. The reaction is performed in one step by arylation with diazonium salts generated in situ. The CNTs are functionalized with benzylamine moieties blocked with three different protecting groups that can be selectively removed under specific conditions. The trifunctionalized CNTs were characterized by TEM, thermogravimetric analysis, and Raman and UV/Vis/NIR spectroscopy, while the amine loading was determined by using the Kaiser test. The sequential removal of the protecting groups of the amine functions allows the grafting of the molecules of interest on the nanotube surface to be controlled.     

Study on the friction and wear behavior of surface‐modified carbon nanotube filled carbon fabric composites

The functionalization of multi‐walled carbon nanotubes (MWNTs) was achieved by grafting furfuryl amine (FA) onto the surfaces of MWNTs. Furthermore, the functional MWNTs were incorporated into carbon fabric composites and the tribological properties of the resulting composites were investigated systematically on a model ring‐on‐block test rig. Friction and wear tests revealed that the modified MWNTs filled carbon fabric composite has the highest wear resistance under all different sliding conditions. Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA) revealed that MWNTs were successfully functionalized and the modification led to an improvement in the dispersion of MWNTs, which played an important role on the enhanced tribological properties of carbon fabric composites. It can also be found that the friction and wear behavior of MWNTs filled carbon fabric composites are closely related with the sliding conditions such as sliding speed, load, and lubrication conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Separation of single‐walled carbon nanotubes with aromatic group functionalized polymethacrylates and building blocks contribution to the enrichment

We previously showed that in N,N‐dimethylformamide (DMF), poly(9‐anthracenylmethyl methacrylate) (PAMMA) and poly(2‐naphthylmethacrylate) selectively disperse semiconducting and metallic single‐walled carbon nanotubes (SWNTs), respectively. We have also proposed a new noncovalent polymer interaction based on photon induced dipole–dipole interaction to account for the metallicity‐based selectivity. In this article, we investigate two other polymethacrylates, that is, poly(benzyl methacrylate) (PBMA) and poly(methylmethacrylate)‐co‐(9‐anthracenylmethyl acrylate) (PMMA‐c‐PAMA) in the light of our previously proposed photon‐induced dipole–dipole interaction. We find that PBMA and PMM‐c‐PAMMA in DMF show no metallicity selectivity. The different selective behavior of the four polymers in DMF manifests the decisive influence of the side aromatic group in determining their metallicity selectivity. The nonpreferential energy transfer from PMMA‐c‐PAMA to SWNTs and the nonoverlap of PBMA fluorescence (in the ultraviolet range) with nanotube absorption account for their nonselectivity of specific nanotube species. Further, the parallel relationship between the diameters of extracted tube species and the affinity between polymers and solvents suggests the leading role of the polymeric conformation on the diameter selectivity. A sufficient (i.e., 2 weeks) standing time of the SWNTs solution after sonication, during which the polymers presumably optimize their conformation to the SWNTs, was found to be essential to the enrichment. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Surface analysis of high performance carbon/bismaleimide composites exposed to electron irradiation

The aim of this article was to investigate the effects of electron irradiation in ultrahigh vacuum environment on the surface properties of high‐performance carbon/bismaleimide (BMI) composites used in aerospace. The changes in surface chemical composition with increasing irradiation fluence were studied by XPS. The evolution of surface morphology and surface roughness were observed by atomic force microscopy (AFM). The mass loss behavior occurring in the surface layer of the composites was examined. The results indicated that the electron irradiation in high vacuum caused rupture of chemical bonds and cross‐linking process in the surface layer, thereby leading to the mass loss behavior and the formation of carbonification layer in the surface of the carbon/BMI composites. The changes in the surface chemical composition were determined by a competing effect existing between the rupture of chemical bonds and the cross‐linking process at lower irradiation fluence, and by a degradation process only at higher fluence of electron irradiation. The surface morphology was altered and the surface roughness was increased significantly after electron irradiation. The mass loss ratio first increased obviously at lower fluences, and then reached a plateau value of 0.45% beyond 5 × 10¹⁵ cm^?2 fluence of electron irradiation. Copyright © 2011 John Wiley & Sons, Ltd.     

Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.     

A novel and efficient route to diarylmethanes catalyzed by nickel(II) ion on nanoporous carbon

Much improved catalytic carbon-carbon bond-forming reactions between aryl chlorides and Grignard reagents has been achieved using nickel(II) ion on nanoporous carbon.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.