Untersuchungen zur Empfindlichkeit der β-Rückstreumethode bei der Messung dünner Auftragsschichten mit einem 11C-Spezialpräparat

Die Bestimmung dünner Auftragsschichten auf bewegten Trāgermaterialien mit der β-Rūckstreumethode hängt wesentlich von der Empfindlichkeit der Messung und der Dynamik des Prozesses ab.

In diesem Beitrag wird für spezielle Stoffe der Einfluβ der Trāgermaterialien bei Mehrschichtproblemen auf die Empfindlichkeit untersucht.     

Изотопные мишени для ядерных исследований

A non-contact measuring method on electrostatic potential by using α-ray ionization is proposed. In this method potential of a charged material is estimated from ionic current flowing through an ion collector attached with a small ²⁴¹Am source. As hade electrode surrounding the collector has a function of adjusting sensitivity and potential up to 50 kV was measured with precision of 1 kV.     

Magnetic properties of carbon nanosheets

Two-dimensional carbon nanosheets have been fabricated using inductively coupled radio frequency plasma-enhanced chemical vapour deposition. The structural properties of the nanosheets have been characterised using atomic force microscopy, scanning electron microscopy and X-ray diffractometer. The magnetisation of the samples was studied using vibrating sample magnetometer. The magnetisation of the nanosheets was found to be diamagnetic for fast synthesis processes (30 and 60 min). On the other hand, the nanosheets exhibited a weak ferromagnetic response for the slow (120 min) synthesis process. Energy dispersive spectrometry and atomic absorption spectroscopy confirmed that the magnetisation exhibited by the carbon nanosheets was an intrinsic property and that it was not due to contamination from the substrate. Raman spectroscopy studies revealed that the ferromagnetic carbon nanosheets have a higher ratio (1.20) of graphite peak (I _G) to disordered peak (I _D) than normally expected (0.75–0.90). Available data indicated that the magnetisation was due to the presence of structural disorders.     

Mechanics and morphology of single-walled carbon nanotubes: from graphene to the elastica

Abstract

The elastica is referred to the shape of the curve into which the centreline of a flexible lamina is bent. Hence, single-walled carbon nanotubes (SWCNTs) are treated as the elastica obtained from bending of graphene. The corresponding large deformation accompanies both the material and geometrical non-linearities. The morphology of the free-standing SWCNTs such as the natural angle of twist, bond lengths, tube radius and wall thickness are determined. Moreover, it is shown that the induced self-equilibriated strain field has a remarkable impact on the mechanical behaviour of the nanotube. Utilization of an appropriate non-linear continuum constitutive relation for graphene leads to exact formulation of the governing equations of SWCNTs. Subsequently, through perturbation analysis, the asymptotic solutions of the initial elastic fields for the SWCNTs are presented. By performing ab initio calculations, the components of the fourth and sixth-order elastic moduli tensors in the constitutive model of graphene needed in this study are computed.     

Facile one‐pot method of initiator fixation for surface‐initiated atom transfer radical polymerization on carbon hard spheres

An efficient and novel one‐pot process is developed to immobilize the atom transfer radical polymerization (ATRP) initiators onto the surface of fully pyrolyzed carbon hard spheres (CHSs) via a radical trapping process from the in situ thermal decomposition of bis(bromomethylbenzoyl)peroxide. The CHSs do not require any additional preparative treatment prior to the initiator immobilization. Styrene and methyl methacrylate are polymerized onto initiator‐immobilized CHSs by surface‐initiated atomic transfer radical polymerization (SI‐ATRP). Samples are characterized using Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. These methods of characterization confirmed that all the CHSs are coated with a uniform layer of grafted polymer. This efficient, one‐pot immobilization of ATRP‐initiators represents an exceptionally simple route for the rapid preparation of various polymer‐coated carbon‐based nanomaterials using SI‐ATRP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3314–3322     

Halocarbons in Antarctic Surface Waters

Abstract

Surface water samples taken during the 1988–89, 1989–90 and 1990–91 Italian expeditions were analyzed for the presence of carbon tetrachloride, trichloroethylene and tetrachloroethylene. The sample analysis was carried out by solvent extraction and capillary GC-ECD-MS determination. The above-mentioned halocarbons were at ng/l level in all water samples investigated.     

Sampling and Analysis of Odorous Compounds in Water Treatment Plants

Abstract

The following analytical method has been used to identify some odorous compounds in the air of the water treatment plant Werdholzli, Zurich: sampling of contaminated air with the help of activated carbon, desorption by the solvents carbon disulphide and methylene chloride, separation of the carbon disulfide extract into a polar and a nonpolar fraction by adsorption column chromatography on silica. Hereafter gaschromatographic analysis of the polar fraction on glass capillary column (Ucon HB 5100); detection and identification were achieved by flame ionisation, thermoionic nitrogen selective detector and computerized mass spectrometry (Finnigan 3200 F, data system 6110).

The results show the presence of sulfur compounds: thiophenes, thiazoles; nitrogen compounds: pyrazines; oxygen compounds: phenols, alcohols and some unsatured hydrocarbons. The malodorous compounds were sulfur and nitrogen compounds in the range of 0.01-0.1 ppm.     

HCSE method for detection of small carbon–carbon couplings and their signs,comparison with SLAP pulse sequence

Performance of homonuclear coupling sign edited (HCSE) experiment applied to detection of signed carbon–carbon couplings is discussed using a set of already measured samples of nine monosubstituted benzenes. It is shown that coupling sign detection is insensitive to the settings of carbon–carbon polarization transfer delays. The HCSE spectra of ten from the total of 43 measured carbon–carbon couplings were considerably influenced by relaxations and proton–proton strong couplings. These effects are quantitatively discussed. The results of HCSE and SLAP experiments are compared. It is shown that the two methods may complement each other in detection of signed carbon–carbon couplings. Copyright © 2013 John Wiley & Sons, Ltd.     

Polycrystalline silicon films prepared by metal-induced crystallisation using pre- and post-deposited aluminium on amorphous silicon

We report on the successful fabrication of polycrystalline silicon films by aluminium-induced crystallisation (AIC) of Radio frequency (rf) plasma-enhanced chemical vapour deposited (PECVD) a-Si films. The effects of annealing at different temperatures (300 and 400°C), below the eutectic temperature of the Si–Al binary system, on the crystallisation process have been studied. This work emphasises the important role of the position of the Al layer with respect to the Si layer on the crystallisation process. The properties of the crystallised films were characterised using X-ray diffraction, Raman spectroscopy, ellipsometry, field-emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). With an increase in the annealing temperature, it was found that the degree of crystallisation of annealed a-Si/Al and Al/a-Si films increased. The results showed that the arrangement where the Al was on top of the a-Si had a more prominent effect on crystallisation enhancement than when Al was below the a-Si. The interfacial layer between the Al and a-Si film is crucial because it influences the layer-exchange process during annealing. The oxide layer formed between the Al and the a-Si layers greatly retards the crystallisation process in the case of the Al/Si arrangement. Our investigations suggest that polycrystalline Si films formed by AIC can be used as a seed layer in solar cell fabrication.