Cationic Nonporous Macrocyclic Organic Compounds for Multimedia Iodine Capture

Over the past two decades, progress in chemistry has generated various types of porous materials for removing iodine (¹²⁹I or ¹³¹I) that can be formed during nuclear energy generation or nuclear waste storage. However, most studies for iodine capture are based on the weak host-guest interactions of the porous materials. Here, we present two cationic nonporous macrocyclic organic compounds, namely, MOC-1 and MOC-2 , in which 6I^- and 8I⁻ were as counter anions, for highly efficient iodine capture. MOC-1 and MOC-2 were formed by reacting 1,1′-diamino-4,4′-bipyridylium di-iodide with 1,2-diformylbenzene or 1,3-diformylbenzene, respectively. The presence of a large number of I⁻ anions results in high I₂ affinity with uptake capacities up to 2.15 g ⋅ g⁻¹ for MOC-1 and 2.25 g ⋅ g⁻¹ for MOC-2 .     

The Stabilization Effect of CO2 in Lithium–Oxygen/CO2 Batteries

The lithium (Li)–air battery has an ultrahigh theoretical specific energy, however, even in pure oxygen (O₂), the vulnerability of conventional organic electrolytes and carbon cathodes towards reaction intermediates, especially O₂⁻, and corrosive oxidation and crack/pulverization of Li metal anode lead to poor cycling stability of the Li-air battery. Even worse, the water and/or CO₂ in air bring parasitic reactions and safety issues. Therefore, applying such systems in open-air environment is challenging. Herein, contrary to previous assertions, we have found that CO₂ can improve the stability of both anode and electrolyte, and a high-performance rechargeable Li–O₂/CO₂ battery is developed. The CO₂ not only facilitates the in situ formation of a passivated protective Li₂CO₃ film on the Li anode, but also restrains side reactions involving electrolyte and cathode by capturing O₂⁻. Moreover, the Pd/CNT catalyst in the cathode can extend the battery lifespan by effectively tuning the product morphology and catalyzing the decomposition of Li₂CO₃. The Li–O₂/CO₂ battery achieves a full discharge capacity of 6628 mAh g⁻¹ and a long life of 715 cycles, which is even better than those of pure Li–O₂ batteries.     

A Layered Cationic Aluminum Oxyhydroxide as a Highly Efficient and Selective Trap for Heavy Metal Oxyanions

Cationic framework materials, especially pure inorganic cationic frameworks that can efficiently and selectively capture harmful heavy metal oxyanions from aqueous solution are highly desired yet scarcely reported. Herein, we report the discovery of a 2D cationic aluminum oxyhydroxide, JU-111, which sets a new benchmark for heavy metal oxyanion sorbents, especially for Cr^VI. Its structure was solved based on 3D electron diffraction tomography data. JU-111 shows fast sorption kinetics (ca. 20 min), high capture capacity (105.4 mg g⁻¹), and broad working pH range (3–10) toward Cr^VI oxyanions. Unlike layered double hydroxides (LDHs), which are poorly selective in the presence of CO₃²⁻, JU-111 retains excellent selectivity for Cr^VI even under a large excess of CO₃²⁻. These superior features coupled with the ultra-low cost and environmentally benign nature make JU-111 a promising candidate for toxic metal oxyanion remediation as well as other potential applications.     

Zwitterionic amino acids as precursors for nonmetal cation pentaborate salts

Nonmetal cation (NMC) pentaborate structures were synthesized using the amino acid molecules as cations precursors. Chemical composition analysis, infrared spectroscopy, mass analysis, boron nuclear magnetic resonance, and thermal gravimetric analysis (TGA/DTA) methods were used for structural characterization. The hydrogen storage efficiency of molecules was also determined experimentally. The recorded infrared spectra support the structural similarities of the molecules. Stretchings of pentaborate rings and characteristic peaks of amino acids were detected in infrared spectra. When the thermal analysis curves were recorded, it was found that the structures showed similar decomposition steps. Due to the result of thermal decay, glassy boron oxide (B₂O₃) formation was observed as the final decomposition products of all molecules. Peaks associated with boric acid, triborate, and pentaborate were observed in the ¹¹B spectra of these salts. Powder X-ray diffraction spectroscopy supports the presence of BO₃ and BO₄⁻ groups regarding the presence of pentaborate rings. It also indicates the high crystallinity of the structures. The molecular cavities detected by brunauer–emmett–teller analysis were found to be 3.586, 1.922, 1.673, and 1.923 g/cm³. Low-molecular cavities can be attributed to the high hydrogen-bonding capacity of the structures. The hydrogen capture efficiency of the pentaborate salts was found to be in the range of 0.039-0.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

A three‐phase solvent extraction system combined with deep eutectic solvent‐based dispersive liquid–liquid microextraction for extraction of some organochlorine pesticides in cocoa samples prior to gas chromatography with electron capture detection

A sample pretreatment method based on the combination of a three‐phase solvent extraction system and deep eutectic solvent‐based dispersive liquid–liquid microextraction has been introduced for the extraction of four organochlorine pesticides in cocoa samples before their determination by gas chromatography‐electron capture detection. A mixture of sodium chloride, acetonitrile, and potassium hydroxide solution is added to cocoa bean or powder. After vortexing and centrifugation of the mixture, the collected upper phase (acetonitrile) is removed and mixed with a few microliters of N,N‐diethanol ammonium chloride: pivalic acid deep eutectic solvent. Then it is rapidly injected into deionized water and a cloudy solution is obtained. Under optimum conditions, the limits of detection and quantification were found to be 0.011‐0.031 and 0.036‐0.104 ng/g, respectively. The obtained extraction recoveries varied between 74 and 92%. Also, intra‐ (n = 6) and interday (n = 4) precisions were less than or equal to 7.1% for the studied pesticides at a concentration of 0.3 ng/g of each analyte. The suggested method was applied to determine the studied organochlorine pesticide residues in various cocoa powders and beans gathered from groceries in Tabriz city (Iran) and aldrin and dichlobenil were found in some of them.     

The Stabilization Effect of CO2 in Lithium–Oxygen/CO2 Batteries

The lithium (Li)–air battery has an ultrahigh theoretical specific energy, however, even in pure oxygen (O₂), the vulnerability of conventional organic electrolytes and carbon cathodes towards reaction intermediates, especially O₂^?, and corrosive oxidation and crack/pulverization of Li metal anode lead to poor cycling stability of the Li‐air battery. Even worse, the water and/or CO₂ in air bring parasitic reactions and safety issues. Therefore, applying such systems in open‐air environment is challenging. Herein, contrary to previous assertions, we have found that CO₂ can improve the stability of both anode and electrolyte, and a high‐performance rechargeable Li–O₂/CO₂ battery is developed. The CO₂ not only facilitates the in situ formation of a passivated protective Li₂CO₃ film on the Li anode, but also restrains side reactions involving electrolyte and cathode by capturing O₂^?. Moreover, the Pd/CNT catalyst in the cathode can extend the battery lifespan by effectively tuning the product morphology and catalyzing the decomposition of Li₂CO₃. The Li–O₂/CO₂ battery achieves a full discharge capacity of 6628 mAh g^?1 and a long life of 715 cycles, which is even better than those of pure Li–O₂ batteries.     

Robust Amino-Functionalized Mesoporous Silica Hollow Spheres Templated by CO2 Bubbles

Hollow-structured mesoporous silica has wide applications in catalysis and drug delivery due to its high surface area, large hollow space, and short diffusion mesochannels. However, the synthesis of hollow structures usually requires sacrificial templates, leading to increased production costs and environmental problems. Here, for the first time, amino-functionalized mesoporous silica hollow spheres were synthesized by using CO₂ gaseous bubbles as templates. The assembly of anionic surfactants, co-structure directing agents, and inorganic silica precursors around CO₂ bubbles formed the mesoporous silica shells. The hollow silica spheres, 200–400 nm in size with 20–30 nm spherical shell thickness, had abundant amine groups on the surface of the mesopores, indicating excellent applications for CO₂ capture, Knoevenagel condensation reaction, and the controlled release of Drugs.