Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a  μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol-acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l⁻¹. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction-pre-concentration step with a pre-conditioned C₁₈ cartridge. Determination of these analytes in the urine of four females urines was demonstrated.     

Gas chromatographic analysis of traces of hydrogen sulfide in hydrogen

Summary A simple gas chromatographic method has been developed for analysis of hydrogen sulfide in hydrogen at the 0.5 to 100 ppm level. After enriching the traces of hydrogen sulfide by absorption in a gas loop packed with the chosen column support at 77 K it was determined by using a Chromosorb G column with silicone 550 and phthalic anhydride as liquid phases, hydrogen as carrier gas and a thermal conductivity detector. The detection limit was found to be about 0.5 ppm of hydrogen sulfide.     

Organically modified sols as pseudostationary phases for microchip electrophoresis

We demonstrate that the selectivity of microchip electrophoresis separations is greatly improved by the presence of organically modified silica (Ormosil) sols in the run buffer. A negatively-charged N-(trimethoxysilylpropyl)ethylenediamine triacetic-acid (TETT)-based sol is used for improving the selectivity between nitroaromatic explosives and a methyltrimethoxysilane (MTMOS)-based sol is employed for enhancing the microchip separation of environmental pollutants, aminophenols. These sols are added to the run buffer and act as pseudostationary phases. Their presence in the run buffer changes the apparent mobility of studied solutes, and leads to a higher resolution. The observed mobilities changes reflect the interactions between the Ormosil sols and the solutes. Relevant experimental variables have been characterized and optimized. The diverse chemistry of Ormosil sols should be extremely useful for tailoring the selectivity of a wide range of electrophoresis microchip separations.     

Low-temperature bath/coupled-capillary/sweeping-micellar electrokinetic capillary chromatography for the separation of naphthalene-2,3-dicarboxaldehyde-derivatized dopamine and norepinephrine

The use of a low-temperature (0 degrees C) bath-assisted coupled capillary for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine and norepinephrine using the sweeping-micellar electrokinetic capillary chromatography (MEKC) mode is described. In this technique, a capillary consisting of two portions with different inside diameters is used. Therefore, the field strength inside the capillary is different. Hence, the electrophoretic migration velocities of the analytes and the electro-osmotic flow (EOF) also are different. Furthermore, when a portion of the capillary (wide portion, used for sweeping) is immersed in a low-temperature bath, the viscosity of the buffer and the retention factor of the analytes inside are increased. Thus, not only are the interactions between the SDS micelles and the analytes increased, but the SDS-analytes also move more slowly. As a result, a more complete separation can be achieved, even when the sample injection volume is large, up to approximately 2 microL. In general, when the volume of an injected sample is larger, the effects of sweeping and separation would become insufficient, especially when the retention values (k) of the analytes are quite different. However, this limitation can be improved when the low-temperature bath/coupled capillary/sweeping-MEKC mode is used.     

Field-theoretic approach to second-order phase transitions in two- and three-dimensional systems

We review the physical principles which are at the basis of recent field-theoretic computations of the critical exponents in two- and three-dimensional systems. We concentrate on those points that do not show up explicitly in the more standard-expansion: they must be discussed with care if one uses a perturbative approach at fixed space dimensions (the loop expansion). We present in detail simple computations of the critical exponents, while we summarize the results of longer and more accurate computations.     

A Novel Method for Quantification of Circulating DNA in Serum by Capillary Zone Electrophoresis

In this paper, we first presented a novel method for quantification of circulating DNA in human serum based on capillary zone electrophoresis with laser-induced fluorescence detection (CZE-LIF). The serum was digested by proteinase to release free DNA, and then CZE-LIF system was used for the quantification of total circulating DNA. This method was successfully used to quantify the circulating DNA levels in sera from healthy individuals and certain cancer patients.We found the significantly elevated circulating DNA levels in certain prostate cancer patients. Our results demonstrated that CZE-LIF system has good linearity, excellent sensitivity (0.5 ng/mL DNA),satisfactory reproducibility (RSDs in one day and between days were both less than 5%) and reliability, and is well suitable to the quantification of the circulating DNA in human serum or plasma.     

Deactivation,coating and performance of nickel capillary columns for GLC

Electroformed nickel tubing was deactivated by chemical vapor deposition of silicon from silane gas and subsequent treatment with cyclooctamethyltetrasiloxane (D4). Standard activity tests performed on the uncoated tube and also on columns coated with crosslinked and uncrosslinked, nonpolar stationary phase, show that good quality flexible columns can be prepared from nickel tubing. The inner surface of the silicon coated tube was characterized by Auger depth profile analysis.     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

Use of a Dual-Marker Form of Analysis to Estimate Binding Constants Between Receptors and Ligands by Affinity Capillary Electrophoresis

This work describes the use of a dual-standard analysis approach termed the time-average ratio (TAR) in affinity capillary electrophoresis (ACE) to estimate binding constants of receptors to ligands. In this form of analysis the TAR is the migration time of the receptor divided by the average of the sum of the migration times of two non-interacting standards. This change in TAR as a function of the concentration of ligand yields a value for the binding constant. This concept is demonstrated using three model systems: carbonic anhydrase B (CAB, EC 4.2.1.1) and arylsulfonamides, vancomycin (Van) and ristocetin (Rist) from Streptomyces orientalis and Nocardia lurida, respectively, and d-Ala- d-Ala terminus peptides. Three ACE techniques are used to examine the three systems: standard ACE, flow-through partial-filling ACE (FTPFACE), and on-column derivatization coupled to ACE. The findings described here demonstrate that ACE data analyzed using the TAR form of analysis yield binding constants between receptors and ligands comparable to those estimated using other ACE forms of analysis. A comparison to three other forms of analysis is described.     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.