安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

两个具有PTP1B抑制活性的4-羟基丁内酯化合物的全合成研究

Two new naturally 4-hydroxylated butenolides were concisely synthesized in excellent enantiomeric purities. An aldol condensation and a Suzuki reaction served successfully as the key steps in the synthesis.     

对-叔丁基杯[8]芳烃键合硅胶制备及其毛细管电色谱性能研究

以γ-(环氧丙氧)丙基键合硅胶为前体,于硅胶表面键合环氧基,在催化剂存在下以杯芳烃钠盐开环制备杯芳烃键合硅胶固定相.该方法反应条件温和,适用性强.将这个新方法首次用于制备对-叔丁基杯[8]芳烃电色谱键合固定相(C8BS),采用加压电色谱初步评价其电色谱性能.研究结果表明,C8BS电渗流(Electrosmoticflow,EOF)较小,但通过控制键合反应及使用压力辅助电色谱可部分弥补上述不足.该固定相的EOF受流动相pH影响小(pH=3-8),同时大环配体屏蔽效应能有效地克服硅羟基引起的碱性化合物拖尾现象,这对电色谱分离具有重要意义.通过分步封尾研究EOF的来源发现,杯芳烃酚羟基对EOF有弱的贡献,这与报道的杯芳烃涂层具有径向电渗流调控能力相一致.     

固态反应合成2，4，6-三苯氧基-1，3，5-均三嗪衍生物

固态反应合成2;4;6-三苯氧基-1;3;5-均三嗪衍生物;固态反应;缩合;氰尿酰氯;三苯氧基均三嗪     

泽泻乙醇提取物的HPCE分离研究

采用高效毛细管电泳的胶束电动毛细管色谱的分离模式(MEKC),对泽泻的乙醇(95％)提取物进行分离研究。以十二烷基硫酸钠(SDS)胶束为准固定相．硼砂为缓冲体系,甲醇为有机添加剂,考察了SDS浓度、硼砂浓度、pH、甲醇用量、电泳电压、电泳温度等对分离的影响。结果表明：硼砂缓冲体系为运行缓冲溶液(pH：9．18～9．20)、硼砂浓度30mmoL／L、SDS浓度45mmol／L、甲醇体积分数30％,分离电压25kv、分离温度25℃时分离效果最好。在此条件下,得到分离度和重现性均较好的泽泻乙醇提取物的HPCE色谱图。     

meso-苯基四苯并卟啉锌的合成和光谱性能的研究

四苯并叶琳(TBP)及其金属配合物是一类新型的光敏性分子,其0-0跃迁出现在λ_max大于630nm的红光区,在光功能材料方面显示出良好的应用前景^[1-2].虽然有关meso-四取代四苯并叶琳金属配合物的合成及其光谱性能的研究已有多篇报道^[3-8],但报道方法的产率较低(最高达15%^[7],有关的光谱性能的报道也不一致^[3-5]。     

Speciation analysis of inorganic arsenic by microchip capillary electrophoresis coupled with hydride generation atomic fluorescence spectrometry

A novel method for speciation analysis of inorganic arsenic was developed by on-line hyphenating microchip capillary electrophoresis (chip-CE) with hydride generation atomic fluorescence spectrometry (HG-AFS). Baseline separation of As(III) and As(V) was achieved within 54 s by the chip-CE in a 90 mm long channel at 2500 V using a mixture of 25 mmol l(-1) H3BO3 and 0.4 mmol l(-1) CTAB (pH 8.9) as electrolyte buffer. The precisions (RSD, n=5) ranged from 1.9 to 1.4% for migration time, 2.1 to 2.7% for peak area, and 1.8 to 2.3% for peak height for the two arsenic species at 3.0 mg l(-1) (as As) level. The detection limits (3sigma) for As(III) and As(V) based on peak height measurement were 76 and 112 microg l(-1) (as As), respectively. The recoveries of the spikes (1 mg l(-1) (as As) of As(III) and As(V)) in four locally collected water samples ranged from 93.7 to 106%.     

Use of non-aqueous capillary electrophoresis for the quality control of commercial saffron samples

A non-aqueous capillary electrophoresis (NACE) method for quantifying the seven crocin metabolites that are the major biologically active ingredients of saffron was developed. Separation is done by using a fused silica capillary filled with a 12.5 mM H3BO3/37.5 mM sodium tetraborate methanolic solution as background electrolyte. The results obtained were compared with the total index "safranal value", widely used as a quality measure of saffron products. The comparison revealed that the proposed NACE method provides useful information not obtained in the safranal value. Infact, samples with a similar safranal value can contain crocin metabolites in different concentrations and relative proportions. This new method is very useful for quality control in commercial saffron samples.     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Synthesis and characterization of hexasubstituted azacryptands

Using an imine condensation strategy, hexaazacryptands were prepared from an aromatic triamine and various dialdehydes. The global shape of these cages can be modified by simple alkylation of the six nitrogen atoms. The cavity is thus elongated and rendered hydrophobic.