An electrothermal vaporization unit with axially focusing convection upstream. Part II: Modeling of the condensation process

A model is presented that describes quantitatively the condensation of analytes in pico- and nanogram masses sampled with electrothermal vaporization (ETV). It presumes that the analyte vapor condensation of such low amounts occurs mainly heterogeneously, predominantly on growing carbon particulates originating from the graphite furnace before the analyte vapor achieves saturation via cooling. The model regards the coagulation of carbon particles and the diffusion of analyte atoms. The criterion whether or not an analyte atom sticks to a colliding particle is chosen as a function depending on its temperature and on the common GFAAS pretreatment temperatures. Heterogeneous condensation of six analytes with different volatilities, Ag, Cu, Fe, Ni, Mn, and Pb, is calculated for the ETV unit with an axially focusing convection upstream described in Part I. Modifier effects are taken into account. The results are compared to measured data.     

Production of submicron-size monodisperse polymer particles having aldehyde groups by the seeded aldol condensation polymerization of glutaraldehyde (II)

Submicron-size monodisperse polystyrene/polyglutaraldehyde (PS/PGLA) composite particles having aldehyde groups at the surfaces were produced by the seeded aldol condensation polymerization of glutaraldehyde at various temperatures of 040°C. Since a part of aldehyde groups was consumed by the Cannizzaro reaction (hemiacetal formation) as a intermolecular reaction of PGLA, the amount of aldehyde groups on PS/PGLA composite particles was varied by the competition between the aldol condensation reaction and the Cannizzaro reaction at the various temperatures.Part CXXXIX of the series Studies on Suspension and Emulsion     

Determination of binding constants and stoichiometries for platinum anticancer drugs and serum transport proteins by capillary electrophoresis using the Hummel-Dreyer method

A CE method has been developed to evidence and quantitatively characterize the interaction between platinum-based antitumor drugs and human serum proteins. This method is a variant of affinity CE modified regarding both experimental setup and data treatment so as to measure the peaks (or vacancies) that correspond to the bound drug when it slowly binds to the protein. Using the formalism of the Hummel-Dreyer method and cisplatin and oxaliplatin as test compounds, a protocol for determining albumin and transferrin binding constants and stoichiometries, including (and distinguished by) 48 hours of incubation of the reaction mixture, was elaborated. Relative affinities of drugs toward different proteins in aqueous solution at physiological pH, chloride concentration, and temperature were compared in terms of overall binding constants and numbers of drug molecules attached to the protein. The results indicate that both platinum drugs bind to albumin more strongly than to transferrin, supporting the concept that the albumin fraction is a major drug supply route for chemotherapeutical needs. From a comparison with the binding parameters measured previously for cisplatin by other methods, conclusions were drawn about the validity of CE as a simple and convenient method for assaying protein-drug reactions with slow kinetics.     

Applications of a miniaturized fluorimetric photodiode array detector for capillary liquid chromatography

A high sensitivity, multichannel fluorescence detector with small volume has been developed for capillary column liquid chromatography. Using an intensified linear photodiode array to monitor fluorescence emission, several important mixtures exhibiting native fluorescence have been examined following high efficiency separation on a capillary column. By correlating mass spectral, fluorescence spectral, and retention time data, information of potential utility in the structural elucidation of aromatic molecules contained in complex mixtures can be obtained. Examples include the separation and spectral examination of the polyaromatic compounds in samples of both biological and environmental interest.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

牛血清蛋白对手性物质的毛细管电泳拆分

采用聚氧乙烯涂层毛细管柱，以牛血清蛋白(BSA)为手性添加剂，运用毛细管电泳电导检测对手性药物沙丁胺醇和多沙唑嗪以及DL-组氨酸、色氨酸、苏氨酸进行拆分。考察了涂层柱的稳定性和重现性。对影响手性分离的主要因素：缓冲溶液的浓度和酸度、BSA的浓度、有机溶剂的种类和浓度以及分离电压进行了系统的研究。结果表明：在选择的最佳实验条件下，各对映异构体在22min内得到基线分离。     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

Regio- and stereoselectivity in the addition reactions of CH-acids to aldehydes under the conditions of phase-transfer catalysis

The regio- and stereoselectivity of the reactions of carbanions, generated from alkanals, carboxylates of the type XYCHCOOEt (X = EtOOC, CN, Ac; Y = H, Br), or derivatives of 3-methyl-4-phosphono-2-butenoic acid using PTC techniques, with aldehydes of various types (alkanals, ,-enals, cross-conjugated enedials, benzaldehydes,etc.) are reviewed. The factors affecting the outcome of these reactions are discussed. The carbanion analogs, triphenylphosphorus ylides, are shown to attack selectively at one of the aldehyde groups of aromatic dialdehydes. The regularities found for the title reactions were used in the syntheses of some biologically active isoprenoids.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1867–1885, October, 1995.     

Evaluation of micellar liquid chromatography and capillary zone electrophoresis for dope control in sport

Micellar liquid chromatography (MLC) and capillary zone electrophoresis (CZE) have been evaluated for the analysis of twelve banned drugs in sport including diuretics and -blockers. In MLC, a sodium dodecylsulphate aqueous solution has been used as mobile phase using an octadecylsilica column. In CZE, a pH 8 buffer solution and a silica capillary have been employed. Parameters of retention and efficiency have been compared. Limits of detection with UV detection at 254 nm and relative standard deviations for atenolol, furosemide, nadolol, spironolactone and triamterene were established and compared in both techniques. Examples of direct urine injection into the separation systems are presented. Drugs overlapping in MLC are well resolved in CZE, while the opposite is true for a limited number of drugs. Some interferences from urine may arise in CZE. The selectivity of analysis would be greatly enhanced by using both techniques, which require only filtration as pre-treatment.     

Metastable fluid flow described via a discrete-velocity coagulation-fragmentation model

A discrete-velocity Boltzmann model is introduced. It is based on two principles: (i) clusters of particles move in ³ with seven fixed momenta; (ii) clusters may gain or lose particles according to the rules of Becker-Döring cluster equations. The model provides a kinetic representation of evaporation and condensation. The model is used to obtain macroscopic fluid equations which are valid into the metastable fluid regime, , where is any positive number, is the inelastic Knudsen number, and _s is the saturation density.