Simultaneous Determination of Acetaminophen and Phenobarbital in Suppositories by Partial Least-Squares Spectrophotometric Calibration

Abstract

The use of partial least-squares spectrophotometric calibration for the simultaneous determination of suppositories in a multicomponent formulation is presented. This method is applied to the deternination of acetaminophen and phenobarbital in suppository preparations. The results show that these components in a molar ratio of about 61:1 in suppositories have been determined simultaneously with high precision.     

Efficient computation of operator‐type response sensitivities for uncertainty quantification and predictive modeling: illustrative application to a spent nuclear fuel dissolver model

This work honors the 75th birthday of Professor Ionel Michael Navon by presenting original results highlighting the computational efficiency of the adjoint sensitivity analysis methodology for function‐valued operator responses by means of an illustrative paradigm dissolver model. The dissolver model analyzed in this work has been selected because of its applicability to material separations and its potential role in diversion activities associated with proliferation and international safeguards. This dissolver model comprises eight active compartments in which the 16 time‐dependent nonlinear differential equations modeling the physical and chemical processes comprise 619 scalar and time‐dependent model parameters, related to the model's equation of state and inflow conditions. The most important response for the dissolver model is the time‐dependent nitric acid in the compartment furthest away from the inlet, where measurements are available at 307 time instances over the transient's duration of 10.5 h. The sensitivities to all model parameters of the acid concentrations at each of these instances in time are computed efficiently by applying the adjoint sensitivity analysis methodology for operator‐valued responses. The uncertainties in the model parameters are propagated using the above‐mentioned sensitivities to compute the uncertainties in the computed responses. A predictive modeling formalism is subsequently used to combine the computational results with the experimental information measured in the compartment furthest from the inlet and then predict optimal values and uncertainties throughout the dissolver. This predictive modeling methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution for the a priori known mean values and uncertainties characterizing the model parameters and the computed and experimentally measured model responses. This approximate a priori distribution is subsequently combined using Bayes' theorem with the “likelihood” provided by the multi‐physics computational models. Finally, the posterior distribution is evaluated using the saddle‐point method to obtain analytical expressions for the optimally predicted values for the parameters and responses of both multi‐physics models, along with corresponding reduced uncertainties. This work shows that even though the experimental data pertains solely to the compartment furthest from the inlet (where the data were measured), the predictive modeling procedure used herein actually improves the predictions and reduces the predicted uncertainties for the entire dissolver, including the compartment furthest from the measurements, because this predictive modeling methodology combines and transmits information simultaneously over the entire phase‐space, comprising all time steps and spatial locations. Copyright © 2016 John Wiley & Sons, Ltd.     

Split least‐squares finite element methods for non‐Fickian flow in porous media

In this article, we introduce two least‐squares finite element procedures for parabolic integro‐differential equations arising in the modeling of non‐Fickian flow in porous media. By selecting the least‐squares functional properly the presented procedure can be split into two independent subprocedures, one subprocedure is for the primitive unknown and the other is for the flux. The optimal order convergence analysis is established. Numerical examples are given to show the efficiency of the introduced schemes. © 2012 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013     

Determination of Some Organochlorine Compounds in the Atmosphere

Abstract

Since plastics are suspected to adsorb orthophosphate, disposable-tip pipettes have been checked to determine their ability to be used in orthophosphate calibration. No adsorption has been detected through an experiment of standard preparation with and without changing the pipette tip. That is, the pipettes appear to be convenient for orthophosphate calibration.     

Improved solution for inventory model with defective goods

This paper is a consequence for a paper of Lin et al. [S.W. Lin, Y.W. Wou, P. Julian, Note on minimax distribution free procedure for integrated inventory model with defective goods and stochastic lead time demand, Appl. Math. Model. 35 (2011) 2087–2093]. We simplified their complicated solution procedure and then presented a revision to patch their negligence for the boundary minimums. Numerical examples are provided to demonstrate our findings.     

密度检定液配制及注意事项

根据密度计的工作和检定原理,介绍各种密度检定液的配制方法及注意事项。针对硫酸氢乙酯检定液难以配制问题,着重介绍了检定液的配制过程,通过对不同浓度酒精液配制的硫酸氢乙酯校准密度计的比较实验,说明了不同体积分数酒精液配制的硫酸氢乙酯对校准结果的影响。     

线型光束可燃气体探测器的校准

介绍线型光束可燃气体探测器的的校准方法。对线型光束可燃气体探测器的示值误差、报警功能、响应时间、光强衰减性能和抗日光干扰性能等主要计量特性及技术指标进行校准,给出了各主要计量特性的校准条件、试验设备和具体校准方法。对两台线型光束可燃气体探测器进行了校准,其示值误差用相对误差表示分别为–5%和4%,用引用误差表示分别为–4%FS和3%FS。经验证,上述结果均未超出设定指标,响应时间等其它主要计量特性也符合方法要求。该方法校准后的计量特性及技术指标较为合理,校准方法切实可行,可以用于线型光束可燃气体探测器的校准。     

Calibration Curve with Improved Limit of Detection for Cadmium in Soil: An Approach to Minimize the Matrix Effect in Laser-Induced Breakdown Spectroscopic Analysis

The present article describes a working or combined calibration curve in laser-induced breakdown spectroscopic analysis, which is the cumulative result of the calibration curves obtained from neutral and singly ionized atomic emission spectral lines. This working calibration curve reduces the effect of change in matrix between different zone soils and certified soil samples because it includes both the species' (neutral and singly ionized) concentration of the element of interest. The limit of detection using a working calibration curve is found better as compared to its constituent calibration curves (i.e., individual calibration curves). The quantitative results obtained using the working calibration curve is in better agreement with the result of inductively coupled plasma–atomic emission spectroscopy as compared to the result obtained using its constituent calibration curves.     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.