Quality assurance and statistical control

In scientific research laboratories it is rarely possible to use quality assurance schemes, developed for large-scale analysis. Instead methods have been developed to control the quality of modest numbers of analytical results by relying on statistical control: Analysis of precision serves to detect analytical errors by comparing thea priori precision of the analytical results with the actual variability observed among replicates or duplicates. The method relies on the chi-square distribution to detect excess variability and is quite sensitive even for 5–10 results. Interference control serves to detect analytical bias by comparing results obtained by two different analytical methods, each relying on a different detection principle and therefore exhibiting different influence from matrix elements; only 5–10 sets of results are required to establish whether a regression line passes through the origo. Calibration control is an essential link in the traceability of results. Only one or two samples of pure solid or aqueous standards with accurately known content need to be analyzed. Verification is carried out by analyzing certified reference materials from BCR, NIST, or others; their limited accuracy of 5–10% make them less suitable for calibration purposes.     

Correction procedure for the electron microprobe analysis of porous materials

A correction method is proposed for the quantitative determination of stoichiometric ratios in porous materials by electron microprobe analysis. Analysis of this kind of material is complicated by an imperfect surface that can only be improved to some extent. The correction is based on a linear dependence (different for each element) of the analyses on a sum of weight concentrations of oxides. With this correction it is possible to use analyses affected by the imperfection of the surface with much better confidence compared to common normalisation. An example is presented for a series of ceramic superconductors Bi_2.1(SrCa)_2.9Cu₂O₈₊.     

Inner shell structure of heavy atoms

The inner-shell structure of some heavy atoms is examined using a self-consistent relativistic local density method. Ar(K), Kr(K) and Xe (K,L ₁,L ₂ andL ₃) binding energies and {ie863-1} (hyper-satellite) energies of Tl, Hg and Tm are calculated. The results are compared with available experimental data. A part of this work was presented byMPD at the Trieste International Symposium on “Core level excitations in atoms, molecules and solids,” 22–26 June 1981, Extended Abstracts (ed.) E Tosatti, ICTP Report No. 89/81 p. 11.     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

Removal of major interference sources in aqueous near-infrared spectroscopy techniques

This work describes a hybrid procedure for eliminating major interference sources in aqueous near-infrared (NIR) spectra, that include aqueous influence, noise, and systemic variations irrelevant to concentration. The scheme consists of two parts: extension of wavelet prism (WPe) and orthogonal signal correction (OSC). First, WPe is employed to remove variations due to aqueous absorbance and noise; then OSC is applied to remove systemic spectral variations irrelevant to concentration. Although water possesses strong absorption bands that overshadow and overlap the absorption bands of analytes, along with noise and systematic interference, successful calibration models can be generated by employing the method proposed here. We show that the elimination of major interference sources from the aqueous NIR spectra results in a substantial improvement in the precision of prediction, and reduces the required number of PLS components in the model. In addition, the strategy proposed here can be applied to various analytical data for quantitative purposes as well.     

Computer optimization of separation in gas-solid chromatography,optimization model and computer-modified mapping procedure

Summary This paper proposes an optimization model for gas-solid chromatographic separations in a non-linear programming form and an approximate equation of the plate height for the model. A computer-modified mapping procedure is also described for searching the optimum separation conditions. Just five experiments and about 20 minutes of the computer time are needed to establish the optima of column temperature and of the carrier gas linear velocity. The relative deviation between the predicted and the experimental values was found to be within 20% for the plate heights, and within 1.5% for the retention times.     

Validation steps for traceability of linear calibrated chemical measurements

Based on the new draft of the EURACHEM/CITAC Guide Traceability in Chemical Measurement, this publication describes how traceability can be achieved for chemical measurements using a linear calibration function. Traceability can be accomplished without larger expenditure, if the measurement is calibrated on the basis of appropriate reference standards and the linear regression employed is selected and validated statistically in a suitable form. The determination of nickel in aqua regia eluates of sediment samples, employed for an ICP-OES measurement, is used as a practical illustration of this approach.     

Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.