Theil Entropy as a Non-Lineal Analysis for Spectral Inequality of Physiological Oscillations

Theil entropy is a statistical measure used in economics to quantify income inequalities. However, it can be applied to any data distribution including biological signals. In this work, we applied different spectral methods on heart rate variability signals and cellular calcium oscillations previously to Theil entropy analysis. The behavior of Theil entropy and its decomposable property was investigated using exponents in the range of [−1, 2], on the spectrum of synthetic and physiological signals. Our results suggest that the best spectral decomposition method to analyze the spectral inequality of physiological oscillations is the Lomb–Scargle method, followed by Theil entropy analysis. Moreover, our results showed that the exponents that provide more information to describe the spectral inequality in the tested signals were zero, one, and two. It was also observed that the intra-band component is the one that contributes the most to total inequality for the studied oscillations. More in detail, we found that in the state of mental stress, the inequality determined by the Theil entropy analysis of heart rate increases with respect to the resting state. Likewise, the same analytical approach shows that cellular calcium oscillations present on developing interneurons display greater inequality distribution when inhibition of a neurotransmitter system is in place. In conclusion, we propose that Theil entropy is useful for analyzing spectral inequality and to explore its origin in physiological signals.     

Investigation in thorium phosphate by NMR II-phosphorus dipolar networks

With through space and through bond experiments in two-dimensional NMR we analyze the transformation from the thorium phosphate-hydrogen phosphate hydrate (TPHPH) to the β form of the thorium phosphate diphosphate (β-TPD) in relation with the phosphorus networks. These techniques are complementary: the through space coupling gives an insight on the dipolar phosphorus networks while the through bond coupling is particularly efficient in the detection of the P₂O₇ groups. With these experiments we show that in a first step, by heating the precursor TPHPH above 250 °C, it transforms into an form of TPD. This transformation is due to the complete condensation of hydrogen phosphate groups HPO₄ into P₂O₇ entities. By heating -TPD above 950 °C it transforms into its well-known β form. The form is characterized by a hygroscopic behavior: some water molecules are present near the P₂O₇ groups that makes non-equivalent their phosphorus nuclei. PO₄ dipolar networks are always present in the form. The main effect of these PO₄ and P₂O₇ units is to give the system a channel structure and the water enters in them.     

Intrinsic Apyrase-Like Activity of Cerium-Based Metal–Organic Frameworks (MOFs): Dephosphorylation of Adenosine Tri- and Diphosphate

Apyrase is an important family of extracellular enzymes that catalyse the hydrolysis of high-energy phosphate bonds (HEPBs) in ATP and ADP, thereby modulating many physiological processes and driving life activities. Herein, we report an unexpected discovery that cerium-based metal–organic frameworks (Ce-MOFs) of UiO-66(Ce) have intrinsic apyrase-like activity for ATP/ADP-related physiological processes. The abundant Ce^III/Ce^IV couple sites of Ce-MOFs endow them with the ability to selectively catalyse the hydrolysis of HEPBs of ATP and ADP under physiological conditions. Compared to natural enzymes, they could resist extreme pH and temperature, and present a broad range of working conditions. Based on this finding, a significant inhibitory effect on ADP-induced platelet aggregation was observed upon exposing the platelet-rich plasma (PRP) to the biomimetic UiO-66(Ce) films, prefiguring their wide application potentials in medicine and biotechnology.     

Surface modifications of crystalline SiO2 and Al2O3 induced by energetic heavy ions

Abstract

Glasses with composition × CoO.(0.25-x) CaO.0.75 B₂O₃ have been prepared over the range 0 ≤ x ≤ 0.25 containing 2 mol% of V₂O₅. Electron paramagnetic Resonance spectra of VO²⁺ of these glasses has been measured at X-band (ν ≈ 9.15 GHz) at room temperature and at liquid nitrogen temperature. Spin Hamiltonian parameters of the VO²⁺ ions have been calculated. It is found that for x ≤ 0.12 the octahedral symmetry of the V⁴⁺ site is improved. A part of these glasses were annealed at 473 K for 24 hours and EPR spectra were recorded and analysed.     

The alkoxide sol–gel process in the calcium phosphate system and its applications†

A single calcium glycolate was synthesized. The alkoxide was stable under ambient atmosphere. The calcium glycolate, phosphoric acid and P(OH) _x (OEt)_{3− x} were used as the precursors. Acetic acid was used as a reagent to modify the calcium glycolate and to change the acidity of the mixtures of the precursors. Mixtures of the calcium glycolate and phosphoric acid in a Ca/P ratio of 1.67 showed unusual sol–gel behavior. A transparent gel could be formed depending on the content of acetic acid and the extent of stirring. The behavior is attributed to a high viscosity and a large molecular size of the ethylene glycol solvent, leading to a strong dependence of the reactions in the mixtures on the diffusion process, greatly affected by stirring. When the mixtures of the calcium glycolate and PO(OH) _x (OEt) _{3− x} contained acetic acid at an acetic acid/Ca ratio of 3, stable alkoxide solutions with Ca/P ratios of 1.0, 1.5 and 1.67 could be formed. Different calcium phosphate compounds and hydroxyapatite coatings on alumina substrates could easily be formed from the alkoxide solutions. The chemical homogeneity provided by the alkoxide route leads to easy formation of the required products. Copyright © 1999 John Wiley & Sons, Ltd.     

Dependence of Colloidal Forces Between Bitumen and Silica on the Chain Lengths of Ammonium Surfactants

Effects of ammonium surfactants with different hydrocarbon chain lengths (C8, C12, C16, and C18) on the colloidal forces between bitumen and silica were studied by atomic force microscopy. The results showed that the chain length of the ammonium surfactants had a significant impact on both the long-range interaction and adhesion forces. With the addition of surfactants with relative short chains of C8 and C12 in the solutions, the long-range repulsive force decreased or even became strong attractive force, while it became repulsive again in solutions of surfactants with long chains of C16 and C18. It was further observed that addition of Ca²⁺ in various surfactants solutions would either depress or enhance the colloidal interactions based on the surfactant chain lengths. It was believed that variation of the interaction behaviors resulted from the mono-layer or bilayer adsorption of various surfactant molecules on the negatively charged surfaces of bitumen and silica, which affected the surface wettability and the surface charge characteristics and then greatly changed the colloidal interactions. The findings indicated that, to have a high bitumen recovery and good froth quality, the surfactant type and concentration of the di-valent metal ions in the oil sand processing slurry must be well considered.     

Electrochemical properties of Meldola's Blue immobilized on silica-titania phosphate prepared by the sol-gel method

The mixed oxide phosphate (≡SiO)₂Ti(O₃POH)₂ having a specific surface area of S_BET= 595 m² g⁻¹ and an average pore volume of 0.43 mL g⁻¹ was prepared by the sol-gel processing method. The material showed the following characteristics: Ti=11.6 wt% and P=10.5 wt%; ion exchange capacity of 0.60 mmol g⁻¹. Meldola's Blue (MLB) dye was adsorbed, by an ion exchange reaction, from an aqueous solution in a quantity of 0.62 mmol g⁻¹. The dye was strongly retained and was not easily leached from the matrix even in presence of 0.5 M electrolyte solution. Changing the solution pH between 2.5 and 7.0, the midpoint potential of the dye-adsorbed (≡SiO)₂ Ti(O₃POMLB)₂ matrix carbon paste electrode remained practically constant, i.e. about 20 mV vs. SCE. This is not the usual behaviour of MLB since its midpoint potential changes considerably in solution phase as the pH is changed. The modified electrode has proved to be stable and electrocatalytically active for hydrazine oxidation at pH 6. Received: 22 June 1999 / Accepted: 7 September 1999     

Therapeutic Potential of Highly Selective A3 Adenosine Receptor Ligands in the Central and Peripheral Nervous System

Ligands of the G_i protein-coupled adenosine A₃ receptor (A₃R) are receiving increasing interest as attractive therapeutic tools for the treatment of a number of pathological conditions of the central and peripheral nervous systems (CNS and PNS, respectively). Their safe pharmacological profiles emerging from clinical trials on different pathologies (e.g., rheumatoid arthritis, psoriasis and fatty liver diseases) confer a realistic translational potential to these compounds, thus encouraging the investigation of highly selective agonists and antagonists of A₃R. The present review summarizes information on the effect of latest-generation A₃R ligands, not yet available in commerce, obtained by using different in vitro and in vivo models of various PNS- or CNS-related disorders. This review places particular focus on brain ischemia insults and colitis, where the prototypical A₃R agonist, Cl-IB-MECA, and antagonist, MRS1523, have been used in research studies as reference compounds to explore the effects of latest-generation ligands on this receptor. The advantages and weaknesses of these compounds in terms of therapeutic potential are discussed.     

具有生物活性有机硅化合物的研究(XIV)──含硅四配位双(单)硫代磷酸酯化合物的研究

共合成了13个含硅四配位二硫代磷酸酯和2个含硅四配位单硫代磷酸酯的新化合物,经元素分析、IR、¹HNMR、MS确定了新化合物结构,对部分化合物进行了生物活性的测定,结果表明个别化合物有较好的生物活性。