产学研合作创新方式下政府补贴策略选择

创新补贴策略是政府鼓励企业创新的一种常见政策,考虑到企业内在的吸收能力与外部不同政府补贴策略方式的存在,本文以产学研合作创新方式为基础,通过建立三阶段博弈模型,利用模型解析与仿真分析讨论吸收能力与创新投入分配比例系数对政府补贴策略选择的影响。研究结果表明:无论政府采取哪一种补贴方式,均可以有效激励企业加大创新投入规模,并且企业的吸收能力与R&D投入、产量及社会福利均呈正相关关系;但是,吸收能力对利润及政府补贴的影响受限于补贴方式和企业的创新投入分配比例系数;此外,在创新产品补贴下,创新难度系数对政府补贴额度的影响并不明显,而创新产品补贴总体优于创新投入补贴。     

Determination of the activity of a molecular solute in saturated solution

Prediction of the solubility of a solid molecular compound in a solvent, as well as, estimation of the solution activity coefficient from experimental solubility data both require estimation of the activity of the solute in the saturated solution. The activity of the solute in the saturated solution is often defined using the pure melt at the same temperature as the thermodynamic reference. In chemical engineering literature also the activity of the solid is usually defined on the same reference state. However, far below the melting temperature, the properties of this reference state cannot be determined experimentally, and different simplifications and approximations are normally adopted. In the present work, a novel method is presented to determine the activity of the solute in the saturated solution (=ideal solubility) and the heat capacity difference between the pure supercooled melt and solid. The approach is based on rigorous thermodynamics, using standard experimental thermodynamic data at the melting temperature of the pure compound and solubility measurements in different solvents at various temperatures. The method is illustrated using data for ortho-, meta-, and para-hydroxybenzoic acid, salicylamide and paracetamol. The results show that complete neglect of the heat capacity terms may lead to estimations of the activity that are incorrect by a factor of 12. Other commonly used simplifications may lead to estimations that are only one-third of the correct value.     

MTDSC Calibration Dependence of the Instrumental Response Upon Experimental Conditions

The heat capacity calibration ‘constants’ of a commercial MTDSC system (TA 3100) were determined in a variety of experimental conditions. For a given modulation frequency, the calibration constants are the same within a few percents for different temperatures, and over a wide range of modulation amplitudes and scan rates. This variation decreases below 1% if hidden instrumental constraints are taken into account, which are related with the capability of the control system to achieve the desired temperature program. On the other hand, the calibration constant changes substantially with the period, and takes anomalously high values for the short modulation periods (20+40 s). Rules to optimize the accuracy of the system are given. This revised version was published online in August 2006 with corrections to the Cover Date.     

Temperature-modulated differential scanning calorimetry of reversible and irreversible first-order transitions

Temperature-modulated differential scanning calorimetry of first-order transitions has led to many new observations. Some of these involve non-linear processes or deal with transformations of practically instantaneous response. The latter may cause serious lags within the calorimeter due to limited thermal conductivity of the sample and the instrument. In both cases the “reversing heat capacity” or a “complex heat capacity” is not a precise representation of the transition since both are computed from abbreviated Fourier transforms, limited to the evaluation of the first harmonic component. One has in these cases to work in the time-domain with the raw output. But even from these analyses in the time-domain many interesting new insights about the transition and the calorimeter performance can be generated.     

Temperature-modulated Calorimetry of the Crystallization of Polymers Analyzed by Measurements and Model Calculations

The response of temperature-modulated differential scanning calorimetry (TMDSC) to irreversible crystallization of linear polymers was investigated by model calculations and compared to a number of measurements. Four different exotherms were added to a typical modulated, reversible heat-flow rate in order to simulate irreversible crystallization. It was found that the reversing heat-flow rate of the TMDSC in response to such irreversible crystallization exotherms is strongly affected by tbe shape of the transition and the phase-angle where the exotherm occurs. A comparison with the experimental data gave valuable insight into the transitions, as well as the nature of the TMDSC response which is usually limited to an analysis of the first harmonic term of the Fourier series that describes the heat-flow rate.This revised version was published online in November 2005 with corrections to the Cover Date.     

Hydrogels of β-cyclodextrin crosslinked by acylated poly(ethylene glycol): Synthesis and properties

Networks of β-cyclodextrin have been prepared by reaction with acylated poly(ethylene glycol) with a molar mass of 600 g/mol. Samples with different β-cyclodextrin/poly(ethylene glycol) ratios: 1/4, 1/6, 1/8 and 1/10 have been prepared. Both components are bonded by ester groups, resulting in a network that can be degraded by hydrolysis in basic and acidic media. The maximum stability of the hydrogels is reached at pH 4. The hydrogel percentage water content depends on β-cyclodextrin content ranging from 82 to 98, and the swelling data obtained for these hydrogels fit well with a second order kinetics. The sorption behavior of these hydrogels has been tested by employing 1-naphthol as model molecule. The sorption capacity is close to other cyclodextrin networks previously reported and depends on the hydrogel composition and the concentration of 1-naphthol.     

Overflow and loss probabilities in a finite ATM buffer fed by self-similar traffic

In [13], real-time measurements from LANs, variable-bit-rate video sources, ISDN control-channels, the World Wide Web and other communication systems have shown that traffic exhibits a behaviour of self-similar nature. In this paper, we give new lower bounds to buffer-overflow and cell-loss probabilities for an ATM queue system with a self-similar cell input traffic and finite buffer. The bounds are better than those obtained in [20], in an important region of parameters. As in [20], they decay hyperbolically with buffer size, when the latter goes to infinity. However, in some region, a factor which accompanies the decay is higher in this paper than in [20]. This revised version was published online in June 2006 with corrections to the Cover Date.     

Simultaneous determination of electroactive and non-electroactive food preservatives by novel capillary electrophoresis with amperometric detection

A novel capillary electrophoresis and amperometric detection method was achieved by adding an electroactive additive (3,4-dihydroxybenzylamine, 3,4-DHBA) to the running buffer, so that both electroactive and non-electroactive food preservatives were simultaneously determined. Under the selected optimum conditions, four electroactive preservatives (methylparaben, ethylparaben, propylparaben and butylparaben) and two non-electroactive preservatives (potassium sorbate and sodium lactate) were well separated and sensitively detected with detection limits (S/N = 3) ranging from 1.06 × 10⁻⁸ to 2.73 × 10⁻⁶ g mL⁻¹. This method has been successfully employed for the determination of both electroactive and non-electroactive preservatives in several food commodities.     

A nitrilo-tri-acetic-acid/acetic acid route for the deposition of epitaxial cerium oxide films as high temperature superconductor buffer layers

A water based cerium oxide precursor solution using nitrilo-tri-acetic-acid (NTA) and acetic acid as complexing agents is described in detail. This precursor solution is used for the deposition of epitaxial CeO₂ layers on Ni-5at%W substrates by dip-coating. The influence of the complexation behavior on the formation of transparent, homogeneous solutions and gels has been studied. It is found that ethylenediamine plays an important role in the gelification. The growth conditions for cerium oxide films were Ar-5% gas processing atmosphere, a solution concentration level of 0.25 M, a dwell time of 60 min at 900 °C and 5-30 min at 1050 °C. X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscopy (AFM), pole figures and spectroscopic ellipsometry were used to characterize the CeO₂ films with different thicknesses. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) was used to determine the carbon residue level in the surface of the cerium oxide film, which was found to be lower than 0.01%. Textured films with a thickness of 50 nm were obtained.     

需求不确定的多周期的容量决策问题

研究每个周期的需求随机增加的情形下的容量扩充问题,建立起切合实际的有限周期随机动态规划模型及在期现值准则下的无限周期随机动态规划模型,进而探索生产单一产品的公司在面对随机增加的市场需求时,风险中立的管理者该如何扩充其生产容量,才能使得其公司在折扣意义下的总期望利润最大.研究无限阶段的容量扩充问题,得出某种约束条件下的优化策略解,给公司管理者提供了其长期可持续发展的优化策略和依据.