Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

Dynamic surface tension of micellar solutions studied by the maximum bubble pressure method

A theoretical model for the dynamic surface tension of an air bubble expanding in micellar surfactant solution is proposed. The model accounts for the effect of expansion of the bubble surface during the adsorption of surfactant molecules (monomers) and the effect of disintegration of polydisperse micelles on the surfactant diffusion. Assuming small deviations from equilibrium and constant rate of expansion analytical expression for the surface tension and the subsurface concentration of monomers as a function of time is derived. The characteristic time of micellization is computed from the experimental data for two surfactants (sodium dodecyl sulfate and nonylphenol polyglycol ether) obtained by the maximum bubble pressure method.     

大口径光学元件波前调制PSD模拟分析

 使用PSD作为大口径光学元件表面加工质量的评价参数，针对不同的波前调制进行了初步的模拟计算，得到了不同调制频率和不同调制深度情况下的PSD曲线变化情况。当调制频率不同时，PSD曲线的突变部分会发生相应的频移，调制频率高则突变发生在空间频率较高的频段，同时PSD峰值不变。相对应调制深度不同时，PSD曲线的突变部份峰值发生变化，调制深度大则峰值大，与此同时峰值出现的位置不会发生变化。计算和分析结果表明PSD分析结果能够在频率域反应出元件表面受到的不同程度的调制信息。     

Observation of defect clustering in Gd-doped calcium fluoride

Abstract

Solid solutions Ca_1-xGd_xF_2+x for 3 × 10^?7≤ x ≤10^?1 have been studied by electron paramagnetic resonance (EPR) and ionic thermal currents (ITC). The EPR experiments show the presence of two single-ion sites a cubic and a tetragonal Gd³⁺ center which co-exist with comparable abundances for intermediate impurity concentrations. The cubic center predominates at very low and high concentrations. Seven different relaxation processes have been identified from the ITC spectra and the variation of their intensity vs. x was measured. The absolute concentrations of the cubic and nn Gd³⁺ dipoles were calculated. The scavenging of interstitial fluorines by the neutral clusters explains both the abundance of cubic sites at high concentration and the variety of orientable clusters detected by ITC.     

考虑防御系统延迟使其预测误差最大的突防弹道设计

对中段多脉冲机动突防弹道的设计问题进行了研究。采用的原理与方法有别于成熟的航天器多脉冲变轨,而是基于路径规划的思想对弹道设计问题简化。考虑敌方防御系统延迟,改进多脉冲点火模型,并基于变射面的思想对关机点参数进行了设计及优化。然后,从使敌方预测误差最大的角度提出评价函数,并利用遗传算法进行优化。最后,给出了一种同时满足导弹机动突防与打击精度要求的多脉冲弹道设计方法。从模型的可行性,方法的有效性、灵活性、迭代效率及精度等方面进行了仿真验证分析。在PC机仿真中,20 s内就设计出一条保证打击精度的中段突防弹道。结果表明,建立的模型是可行的,提出的突防弹道设计方法是快速有效的。     

Assessing the Calibration of High-Dimensional Ensemble Forecasts Using Rank Histograms

Any decision-making process that relies on a probabilistic forecast of future events necessarily requires a calibrated forecast. This article proposes new methods for empirically assessing forecast calibration in a multivariate setting where the probabilistic forecast is given by an ensemble of equally probable forecast scenarios. Multivariate properties are mapped to a single dimension through a prerank function and the calibration is subsequently assessed visually through a histogram of the ranks of the observation’s preranks. Average ranking assigns a prerank based on the average univariate rank while band depth ranking employs the concept of functional band depth where the centrality of the observation within the forecast ensemble is assessed. Several simulation examples and a case study of temperature forecast trajectories at Berlin Tegel Airport in Germany demonstrate that both multivariate ranking methods can successfully detect various sources of miscalibration and scale efficiently to high-dimensional settings. Supplemental material in form of computer code is available online.     

Investigation of a UV-laser generated waveguide in a planar polymer chip using an improved interferometric method

Polymeric integrated-optical waveguides are prepared in a planar polymer chip by UV-laser lithographic methods. The waveguide samples are irradiated by an excimer laser at a wavelength Λ=248 nm with various irradiation parameters (different fluencies and irradiation doses). Mach-Zehnder interferometer is employed and the refractive index depth profiles of the waveguide samples are obtained. This profile covers two regions having exponential and Gaussian shapes. The model field distributions strongly depend on the refractive index of each region. The mode field distribution and the effective mode indices for each region have been calculated on the basis of a theoretical model and the experimentally measured data.     

Characteristic behaviour of plasma fluctuations inside a plasma bubble in presence of a magnetic field due to the formation of a potential well

Experiments were carried out to observe the effect of a magnetic field and grid biasing voltage in presence of a plasma bubble in a magnetized, filamentary discharge plasma system. A spherical mesh grid of 80% optical transparency was negatively biased and introduced into the plasma for creating a plasma bubble. Diagnostics via an electrical Langmuir probe and a hot emissive probe were extensively used for scanning the plasma bubble. Plasma floating potential fluctuations were measured at three different positions of the plasma bubble. The instability in the pattern showed the dynamic transition from periodic to chaotic for increasing magnetic fields. Time scale analysis using continuous wavelet transform was carried out to identify the presence of non‐linearity from the contour plots. The mechanisms of the low‐frequency instabilities along with the transition to chaos could be qualitatively explained. Non‐linear techniques such as fast Fourier transform, phase space plot, and recurrence plot were used to explore the dynamics of the system appearing during plasma fluctuations. In order to demonstrate the observed chaotic phenomena in this study, characteristics of chaos such as the Lyapunov exponent were obtained from experimental time series data. The experimentally observed potential structure is confirmed with numerical analysis based on fluid hydrodynamics.