The effect of terminal chain modifications on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

The typical sidewalls produced in the fabrication of protrusion electrodes are proposed to create a low voltage (4.5 V_rms) and high transmittance (93%) blue-phase liquid crystal display (BP-LCD). The tilted electrodes produce a strong horizontal electrical field that reduces the operating voltage considerably. The common problem of the ‘dead zones’ is solved by reflecting the light onto the electrodes. In order to estimate the phase retardation of the reflected light, a ray tracing simulation program for anisotropic mediums has been developed. The proposed device is more competitive than vertical field switching based BP-LCD and also, has the advantages of protruded in-plane-switching structures. These facts make this technology a potential candidate for the next generation of BP-LCDs.     

Electric modeling and characterization of pulsed high‐voltage nanoelectrospray ionization sources by a miniature ion trap mass spectrometer

A better understanding of nanoelectrospray ionization (nano‐ESI) would be beneficial in further improving the performances of nano‐ESI. In this work, the pulsed high‐voltage (HV) nano‐ESI has been electrically modeled and then systematically characterized by both voltage‐current and mass spectrometry measurements. First, the equivalent resistance of a nano‐ESI source changes with respect to both emitter tip diameter and the HV applied. Increased voltage could improve both spray current and ionization efficiency of the pulsed HV nano‐ESI. Compared with conventional DC HV method, a pulsed HV has less heating effect on the capillary tip and thus allowing the application of a much higher voltage onto a nano‐ESI source. As a result, a pulsed HV nano‐ESI could further boost the ionization efficiency of nano‐ESI by employing even higher voltages than conventional DC nano‐ESI sources.     

Time-resolved optical emission spectroscopic measurements of He plasma induced by a high-power CO2 pulsed laser

Laser-induced breakdown spectroscopy of helium plasma, initially at room temperature and pressures ranging from 12 to 101 kPa was investigated using a transverse excitation atmospheric CO₂ pulsed laser (λ = 9.621 and 10.591 μm, a full width at half maximum of 64 ns, and an intensity from 1.5 to 5.36 GW cm⁻²). The helium breakdown spectrum is mainly due to electronic relaxation of excited He, He⁺ and H. Plasma characteristics were examined in detail on the emission lines of He and He⁺ by the time-integrated and time-resolved optical emission spectroscopy technique. Optical breakdown threshold intensities, ionization degree and plasma temperatures were obtained. An auxiliary metal mesh target was used to analyze the temporal evolution of the species in the plasma. The results show a faster decay of the continuum emission and He⁺ species than in the case of neutral He atoms. The velocity and kinetic energy distributions for He and He⁺ species were obtained from time-of-flight measurements. Electron density in the laser-induced plasma was estimated from the analysis of spectral data at various times from the laser pulse incidence. Temporal evolution of electron density has been used for the estimation of the three-body electron-ion recombination rate constant.     

Analytical potential of a laser ablation–glow discharge–optical emission spectrometry system for the analysis of conducting and insulating materials

The analytical capabilities of a glow discharge (GD) as a secondary source for excitation/ionization of the material provided by laser ablation (LA) have been compared to conventional laser induced breakdown spectroscopy (LIBS). In LA–GD both sources can be independently adjusted to optimize the sampling process and then its subsequent excitation. This could involve a number of analytical performance advantages, such as reduced matrix dependence, greater precision and sensitivity than those encountered in LIBS. For such purpose, an ablation chamber design including two electrodes to generate the GD discharge has been built and assayed. A comparison between LIBS and LA–GD–OES has been carried out, both, under reduced argon and helium atmospheres. Different sets of samples (conducting reference materials, glass and fluorine pellets) have been used to evaluate the novel coupled technique. The LA–GD coupled system has shown to provide lower detection limits. In addition, best linear correlations between intensities and concentrations and lower matrix effects have also been found using the coupled system. Moreover, special advantages of the LA–GD–OES have also been demonstrated for the analysis of fluorine.     

铜-真空-铜金属隧道结转变电压的理论研究

利用非平衡格林函数与密度泛函理论相结合方法研究了电极表面具有原子级突起的铜-真空-铜隧道结的转变电压.计算结果表明,铜电极真空隧道结的转变电压主要决定于电极表面尖端铜原子4p轨道的局域态密度,因而对电极取向和表面局域原子构型非常敏感.对于电极取向沿(111)方向的铜电极真空隧道结,当电极表面原子级突起取为铜吸附原子和金字塔型铜纳米粒子两种构型时,转变电压的计算值分别约为1.40和2.40 V.当电极取向沿(100)方向时,电极表面原子级突起分别为铜吸附原子和金字塔型铜纳米粒子两种构型的铜电极真空隧道结,其转变电压的差异更为显著.具体而言,电极表面有一金字塔型铜纳米粒子的铜电极真空隧道结的转变电压值减小至1.70 V,而电极表面原子级突起为铜吸附原子的铜电极真空隧道结却因铜吸附原子4p轨道的局域态密度过于扩展,即使在偏压超过1.80 V时仍然没有出现转变电压.这些结果表明转变电压谱可用作分析金属电极真空隧道结电子输运特性的有力工具.     

Modeling and simulation of chemo-electro-mechanical behavior of pH-electric-sensitive hydrogel

A chemo-electro-mechanical multi-field model, termed the multi-effect-coupling pH-electric-stimuli (MECpHe) model, has been developed to simulate the response behavior of smart hydrogels subject to pH and electric voltage coupled stimuli when the hydrogels are immersed in a pH buffer solution subject to an externally applied electric field. The MECpHe model developed considers multiphysics effects and formulates the fixed charge density with the coupled buffer solution pH and electric voltage effects, expressed by a set of nonlinear partial differential governing equations. The model can be used to predict the hydrogel displacement and the distributive profiles of the concentrations of diffusive ionic species and the electric potential and the fixed charge density in both the hydrogels and surrounding solution. After validation of the model by comparison of current numerical results with experiment data extracted from the literature, one-dimensional steady-state simulations were carried out for equilibrium of the smart hydrogels subject to pH and electric coupled stimuli. The effects of several important physical conditions, including the externally applied electric voltage, on the distributions of the concentrations of diffusive ionic species, the electric potential, the fixed charge density, and the displacement of the hydrogel strip were studied in detail. The effects of the ionic strength on the bending deformation of the hydrogels under the solution pH and electric voltage coupled stimuli are also discussed.     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

废水中铜银的分离和银的回收研究

废水中铜银的分离和银的回收研究黄秀山（四川三峡学院化学系万县６３４０００）关键词分解电压，还原电势，回收一、引言本实验采用电解还原的方法回收贵金属银。目前此法主要用于回收废水中的铬、汞等，对银的研究很少。曾有人进行过自然渗析还原法回收银的研究。用自然...     

Remarkably improved cycling stability of 3D porous Cu–Sn anode for lithium-ion full cells by adjusting working voltage range

Numerous studies confirm that three dimensional porous Cu–Sn (3DP Cu–Sn) anode possesses good application prospect in light of its desirable electrochemical performance on lithium ion half cells, but there are a few related systematic researches on lithium ion full cells until now, which is indispensable before its commercialization. Herein, the effects of galvanostatic charge-discharge voltage range on the cycling stability of 3DP Cu–Sn anode for lithium ion full cells are investigated systematically. The results show that the suitable charge-discharge voltage range plays a key role in improving the reversible capacity and cycling stability of the 3DP Cu–Sn||LiCoO₂ full cell, which is closely related to maintaining the electrode structure stable by controlling the amount of Li⁺ extracted and inserted. Especially, in the voltage range of 1.2–3.9 ​V, the full cell exhibits remarkably improved electrochemical properties with the high initial reversible capacity of 2.71 ​mAh cm⁻² and 71.95% capacity retention upon 80 cycles. We believe that this work can provide a significant reference for the practical application of porous Sn-based anodes.     

q value and parent energy optimization using a low-voltage ionization approach increases resolution in linear ion trap mass spectrometry

In this work, the isolation step in the linear ion trap was performed using different “q values” conditions at a low collision-induced dissociation (CID) energy leading to the parent ion resolution improvements, reasonably due to better ion energy distribution. According to the results, we obtained a greater resolution and mass accuracy operating in both traditional electrospray and low voltage ionization near the q value = 0.778 and with a CID energy of 10%. This effect was evaluated with low-molecular-mass compounds (skatole and arginine). The proposed optimization yielded a superior instrument performance without adding technological complexity to mass spectrometry analyses.