氢原子在Ru(0001)表面的化学吸附

用密度泛函理论研究了氢原子的污染对于Ru(0001)表面结构的影响. 通过PAW(projector-augmented wave)总能计算研究了p(1×1)、p(1×2)、(3^(1/2)×3^(1/2))R30°和p(2×2)等几种氢原子覆盖度下的吸附结构, 以及在上述结构下Ru(0001)面fcc(面心立方)格点和hcp(六方密堆)格点的氢原子吸附. 所得结果表明, 在p(1×1)-H、p(1×2)-H、(3^(1/2)×3^(1/2))R30°-H和p(2×2)-H几种H原子覆盖度下, 以p(1×1)-H结构单个氢原子吸附能为最大. 在p(1×1)-H吸附结构下,由于氢原子吸附导致的Ru(0001) 表面第一层Ru 原子收缩的理论计算数值分别为-1.11%(hcp 吸附)和-1.55%(fcc 吸附), 因此实际上最有可能的情况是两种吸附方式都有一定的几率. 而实验中观察到的“清洁”Ru(0001)表面实际上是有少量氢原子污染的表面. 不同覆盖度和氢分压下氢原子吸附的污染对Ru(0001)表面结构有极大的影响,其表面的各种特性都会随覆盖度的不同而产生相应的变化.     

Ring Expansions of Boroles with Diazo Compounds: Steric Control of C or N Insertion and Aromatic/Nonaromatic Products

Access to novel imine‐substituted 1,2‐azaborinines, as well as highly arylated boracyclohexa‐3,5‐dienes has been developed by ring expansion of boroles with diazoalkanes with varying degrees of steric bulk. The formation of a diazoalkane intermediate is also discussed for the reaction of ortho‐brominated p‐tolyl‐azide with 1,2,3,4,5‐pentaphenylborole. Structural details as well as UV/Vis spectroscopic and cyclic voltammetric data are provided. These boron‐containing heterocycles have the potential to serve as building blocks for boron‐containing materials.     

Copper‐Catalyzed Borylative Allyl–Allyl Coupling Reaction

Borylative allyl–allyl coupling using allenes, bis(pinacolato)diboron, and allyl phosphates has been developed in the presence of a copper catalyst bearing an N‐heterocyclic carbene ligand. The reaction affords boryl‐substituted 1,5‐diene derivatives in good to high yields with high regioselectivity and Z selectivity.     

Properties and Characterization of Modified HZSM—5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673K were investigated.The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desortion (TPD) of ammonia.The structure of the samples was characterized by XRD,and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy(SEM).The XRD results show that the modified samples have no novel crystalline phase,indicating a high dispersion of phosphorus and boron species.After treatment,the microporous volume and surface area of the samples markedly decrease,implying the bolockage of the channel.The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type Ⅰ and Ⅳ，and all hysteresis loops resemble the H4-type in the IUPAC classification.The total acidity of the modified samples,determined by pyrldine adsorption IR and TPD of ammonia,decreases in contrast to that of the parent HZSM-5.The conversion of n-heptane over P and B steammodified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.     

The Triboracyclopropenyl Dianion: The Lightest Possible Main‐Group‐Element Hückel π Aromatic

Hückel π aromaticity is typically a domain of carbon‐rich compounds. Only very few analogues with non‐carbon frameworks are currently known, all involving the heavier elements. The isolation of the triboracyclopropenyl dianion is presented, a boron‐based analogue of the cyclopropenyl cation, which belongs to the prototypical class of Hückel π aromatics. Reduction of Cl₂BNCy₂ by sodium metal produced [B₃(NCy₂)₃]^2?, which was isolated as its dimeric Na⁺ salt (Na₄[B₃(NCy₂)₃]₂?2 DME; 1 ) in 45 % yield and characterized by single‐crystal X‐ray diffraction. Cyclic voltammetry measurements established an extremely high oxidation potential for 1 (E_pc=?2.42 V), which was further confirmed by reactivity studies. The Hückel‐type π aromatic character of the [B₃(NCy₂)₃]^2? dianion was verified by various theoretical methods, which clearly indicated π aromaticity for the B₃ core of a similar magnitude to that in [C₃H₃]⁺ and benzene.     

Nature of Bonding in Bowl‐Like B36 Cluster Revisited: Concentric (6π+18π) Double Aromaticity and Reason for the Preference of a Hexagonal Hole in a Central Location

The bowl‐shaped C_6v B₃₆ cluster with a central hexagon hole is considered an ideal molecular model for low‐dimensional boron‐based nanosystems. Owing to the electron deficiency of boron, chemical bonding in the B₃₆ cluster is intriguing, complicated, and has remained elusive despite a couple of papers in the literature. Herein, a bonding analysis is given through canonical molecular orbitals (CMOs) and adaptive natural density partitioning (AdNDP), further aided by natural bond orbital (NBO) analysis and orbital composition calculations. The concerted computational data establish the idea of concentric double π aromaticity for the B₃₆ cluster, with inner 6π and outer 18π electron counting, which both conform to the (4n+2) Hückel rule. The updated bonding picture differs from existing knowledge of the system. A refined bonding model is also proposed for coronene, of which the B₃₆ cluster is an inorganic analogue. It is further shown that concentric double π aromaticity in the B₃₆ cluster is retained and spatially fixed, irrespective of the migration of the hexagonal hole; the latter process changes the system energetically. The hexagonal hole is a destabilizing factor for σ/π CMOs. The central hexagon hole affects substantially fewer CMOs, thus making the bowl‐shaped C_6v B₃₆ cluster the global minimum.     

Crystal structure of boron difluoride 3-phenylthiopentane-2,4-dionate. π stacking interactions and luminescence of boron difluoride acetyl acetonates

The crystal structure of boron difluoride 3-phenylthiopentane-2,4-dionate was determined. The relationship between the structure and luminescent properties is traced in the series of boron difluoride acetyl acetonates (acetyl acetonate, phenylacetyl acetonate, and phenylthioacetyl acetonate). The presence of the π stacking interactions in boron difluoride phenylthioacetyl acetonate crystals leads to increased intensity and bathochromic shift of the fluorescence band.     

Photochemically Produced Superhydrophobic Silane@polystyrene-Coated Polypropylene Fibrous Network for Oil/Water Separation

Cost-effective separation of oil and immiscible organic contaminants from water has become an urgent challenge to protect aquatic and human life from devastating effects. Therefore, it has become imperative to develop super-selective materials for efficiently separating oil from water. In this work, a superhydrophobic surface has been formed that consists of a silane@polystyrene-coated polypropylene fibrous network (silane@PS-PPF) for efficient separation of accidentally spilled oil from water. The superhydrophobic PPFs were designed by a simple, cost-effective two-step process that includes photochemically controlled polymerization of styrene and subsequent dip coating in octadecyltrichlorosilane solution. The hydrophobic surface (CA=129°±4°) of the PS coated PPF after treating with silane was turned into a superhydrophobic body (CA=161°±2°). The achieved silane@PS-PPF fibrous network selectively allowed the fast permeation of the oils and non-polar organic liquids by altogether rejecting water during operation. The separation efficiency for various oils from the contaminated water was 96 to 99%, with a high flux in the range of 7606±312 L m⁻²h⁻¹ to 9870±151 L m⁻²h⁻¹. Apart from being used as a filter, the silane@PS-PPF was also used as an oil absorber and has shown an absorption capacity in the range of 1185 to 1535% for various oils. We anticipate that the developed silane@PS-PPF, due to its facile synthetic route, cost-effectiveness, and high performance, can be effectively used in oily wastewater treatment and clean-up of large oil spills from water.     

Al_2O_3 基陶瓷摩阻材料的摩擦磨损特性

在ＭＧ－２００磨损试验机上，对以Ａｌ２Ｏ３为基体，分别添加固体润滑剂组元石墨和氮化硼制备的２种陶瓷摩阻材料的摩擦磨损特性进行了试验研究．结果表明：在给定的试验条件下，添加石墨或氮化硼都可以改善材料摩擦性能的稳定性；分别在１００℃，２００℃，３００℃和４００℃下定温试验时，这２种摩阻材料都具有较高的摩擦因数和良好的耐磨性，其中含氮化硼之摩阻材料的耐磨性比含石墨之摩阻材料的更好，前者在４００℃时的磨损率仅为后者在同温时的１／２．     

硼钙营养对胡柚果实品质的影响

连续2斫对胡柚进行叶面喷施硼（B）、钙（Ca）及硼加钙（B＋Ca）溶液试验,以探讨B、Ca及其互作对胡柚果实品质的影响效应。结果表明,B及B＋Ca处理显著改善了果实的外观品质和内在品质,果重分别比对照提高19．16％－34．51％和17．47％－29．81％,果皮百分分别降低3．59％－4．83％和1．06％－3．30％,降低了收获期果皮的叶绿素a（chla）和叶绿素b(chlb）含量,增加了类胡萝卡素（chlc）含量及chlc/(chla chlb）比值,果实色泽有了明显的改观;不同程度地提高了胡柚的糖、固形物、糖酸比及维生素C含量,降低了果实有机酸含量和渣汁比;B及B＋Ca处理还显著低胡柚的生理病果率,病果率分别对照降低2．23％－7．72％和1．27％－6．12％。Ca处理对果实生理病害、1果实外观及内在品质的效果在1998年较为显著。